A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement

Journal of Manufacturing Processes - Tập 35 - Trang 127-139 - 2018
Bintao Wu1, Zengxi Pan1, Donghong Ding2, Dominic Cuiuri1, Huijun Li1, Jing Xu3, John Norrish1
1School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia
2School of Mechatronic Engineering, Foshan University, Foshan Guangdong, 528000, China
3School of Mechanical Engineering, Tsinghua University, Beijing, 100084, China

Tài liệu tham khảo

Ralph, 1925, Method of making decorative articles, in, Google Patents

Dickens, 1992, Rapid prototyping using 3-D welding, in, DTIC Document

Spencer, 1998, Rapid prototyping of metal parts by three-dimensional welding, Proc Inst Mech Eng Part B J Eng Manuf, 212, 175, 10.1243/0954405981515590

Kovacevic, 1998, Process control of 3D welding as a droplet-based Rapid prototyping technique, Proc. Ofthe SFF Symposium, Univ. of Texas at Austin, 57

Dwivedi, 2004, Automated torch path planning using polygon subdivision for solid freeform fabrication based on welding, J Manuf Syst, 23, 278, 10.1016/S0278-6125(04)80040-2

Jandric, 2004, Effect of heat sink on microstructure of three-dimensional parts built by welding-based deposition, Int J Mach Tools Manuf, 44, 785, 10.1016/j.ijmachtools.2004.01.009

Song, 2005, 3D welding and milling: part I–a direct approach for freeform fabrication of metallic prototypes, Int J Mach Tools Manuf, 45, 1057, 10.1016/j.ijmachtools.2004.11.021

Song, 2005, 3D welding and milling: part II—optimization of the 3D welding process using an experimental design approach, Int J Mach Tools Manuf, 45, 1063, 10.1016/j.ijmachtools.2004.11.022

Zhang, 2003, Weld deposition-based rapid prototyping: a preliminary study, J Mater Process Technol, 135, 347, 10.1016/S0924-0136(02)00867-1

Zhang, 2002, Automated system for welding-based rapid prototyping, Mechatronics, 12, 37, 10.1016/S0957-4158(00)00064-7

Kwak, 2002, Geometry regulation of material deposition in near-net shape manufacturing by thermally scanned welding, J Manuf Process, 4, 28, 10.1016/S1526-6125(02)70131-X

Katou, 2007, Freeform fabrication of titanium metal and intermetallic alloys by three-dimensional micro welding, Mater Des, 28, 2093, 10.1016/j.matdes.2006.05.024

Baufeld, 2010, Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: microstructure and mechanical properties, Mater Des, 31, S106, 10.1016/j.matdes.2009.11.032

Clark, 2008, Shaped metal deposition of a nickel alloy for aero engine applications, J Mater Process Technol, 203, 439, 10.1016/j.jmatprotec.2007.10.051

Merz, 1994, Shape deposition manufacturing, engineering design research center, Carnegie Mellon Univ.

Xiong, 2013, Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing, Robot Comput Integr Manuf, 29, 417, 10.1016/j.rcim.2012.09.011

Xiong, 2013, Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing, J Clean Prod, 41, 82, 10.1016/j.jclepro.2012.10.009

Yang, 2016, Forming characteristics of thin-wall steel parts by double electrode GMAW based additive manufacturing, J Mater Process Technol, 227, 153, 10.1016/j.jmatprotec.2015.08.021

Aiyiti, 2006, Investigation of the overlapping parameters of MPAW-based rapid prototyping, Rapid Prototyp J, 12, 165, 10.1108/13552540610670744

Suryakumar, 2011, Weld bead modeling and process optimization in Hybrid Layered Manufacturing, Comput Des, 43, 331

Ding, 2014, A tool-path generation strategy for wire and arc additive manufacturing, Int J Adv Manuf Technol, 73, 173, 10.1007/s00170-014-5808-5

Ding, 2015, A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures, Robot Comput Integr Manuf, 34, 8, 10.1016/j.rcim.2015.01.003

Ding, 2016, Adaptive path planning for wire-feed additive manufacturing using medial axis transformation, J Clean Prod, 133, 942, 10.1016/j.jclepro.2016.06.036

Ma, 2016, The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process, Mater Sci Eng A, 657, 86, 10.1016/j.msea.2016.01.060

Reduce costs and increase output with robotic welding, in, https://www.scottautomation.com/applications/metal-fabrication/welding/.

Williams, 2016, Wire + arc additive manufacturing, Mater Sci Technol, 32, 641, 10.1179/1743284715Y.0000000073

Ding, 2015, Wire-feed additive manufacturing of metal components: technologies, developments and future interests, Int J Adv Manuf Technol, 81, 465, 10.1007/s00170-015-7077-3

Levy, 2003, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and tuture perspectives, CIRP Ann Manuf Technol, 52, 589, 10.1016/S0007-8506(07)60206-6

Frazier, 2014, Metal additive manufacturing: a review, J Mater Eng Perform, 23, 1917, 10.1007/s11665-014-0958-z

Lewandowski, 2016, Metal additive manufacturing: a review of mechanical properties, Annu Rev Mater Res, 46, 151, 10.1146/annurev-matsci-070115-032024

Gao, 2015, The status, challenges, and future of additive manufacturing in engineering, Comput Des, 69, 65

Ding, 2011, Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts, Comput Mater Sci, 50, 3315, 10.1016/j.commatsci.2011.06.023

Ding, 2015, A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM), Robot Comput Integr Manuf, 31, 101, 10.1016/j.rcim.2014.08.008

Ding, 2016, Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing, Robot Comput Integr Manuf, 39, 32, 10.1016/j.rcim.2015.12.004

Ding, 2016, Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part, Comput Des, 73, 66

Ding, 2015, Process planning strategy for wire and arc additive manufacturing, 437

Ding, 2016, Advanced design for additive manufacturing: 3D slicing and 2D path planning

Sequeira Almeida, 2012

Xiong, 2016, Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing, J Mater Process Technol, 233, 100, 10.1016/j.jmatprotec.2016.02.021

Geng, 2017, Optimization of wire feed for GTAW based additive manufacturing, J Mater Process Technol, 243, 40, 10.1016/j.jmatprotec.2016.11.027

Zhang, 2016, Effects of thermal history on the microstructure evolution of Ti-6Al-4V during solidification, J Mater Process Technol, 227, 281, 10.1016/j.jmatprotec.2015.08.030

Denlinger, 2015, Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys, J Mater Process Technol, 215, 123, 10.1016/j.jmatprotec.2014.07.030

Gu, 2016, The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al–6.3Cu alloy, Mater Sci Eng A, 651, 18, 10.1016/j.msea.2015.10.101

Uriondo, 2015, The present and future of additive manufacturing in the aerospace sector: a review of important aspects, Proc Inst Mech Eng G J Aerosp Eng, 229, 2132, 10.1177/0954410014568797

Sing, 2016, Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: a review on processes, materials and designs, J Orthop Res, 34, 369, 10.1002/jor.23075

Murr, 2010, Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting, Acta Mater, 58, 1887, 10.1016/j.actamat.2009.11.032

Guo, 2013, Additive manufacturing: technology, applications and research needs, Front Mech Eng, 8, 215, 10.1007/s11465-013-0248-8

Kainer, 2006

Leyens, 2003

Kim, 2014, Additive manufactured porous titanium structures: through-process quantification of pore and strut networks, J Mater Process Technol, 214, 2706, 10.1016/j.jmatprotec.2014.05.006

Wang, 1983, New stainless steel without nickel or chromium for marine applications, Met. Prog., 123, 72

Aziz-Kerrzo, 2001, Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials, Biomaterials, 22, 1531, 10.1016/S0142-9612(00)00309-4

Wu, 2018, The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution, Corros Sci, 137, 176, 10.1016/j.corsci.2018.03.047

Lu, 2002, Corrosion resistance of ternary Ni P based alloys in sulfuric acid solutions, Electrochim Acta, 47, 2969, 10.1016/S0013-4686(02)00198-6

Stoloff, 2000, Emerging applications of intermetallics, Intermetallics, 8, 1313, 10.1016/S0966-9795(00)00077-7

Varghese, 2003, Crystallization and high-temperature structural stability of titanium oxide nanotube arrays, J Mater Res, 18, 156, 10.1557/JMR.2003.0022

Bewlay, 2003, A review of very-high-temperature Nb-silicide-based composites, Metall Mater Trans A, 34, 2043, 10.1007/s11661-003-0269-8

Jackson, 1996, High-temperature refractory metal-intermetallic composites, JOM, 48, 39, 10.1007/BF03221361

Bissacco, 2005, Micromilling of hardened tool steel for mould making applications, J Mater Process Technol, 167, 201, 10.1016/j.jmatprotec.2005.05.029

Yan, 2013

Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti–6Al–4V, Acta Mater, 58, 3303, 10.1016/j.actamat.2010.02.004

Baufeld, 2009, Microstructure of Ti-6Al-4V specimens produced by shaped metal deposition, Int J Mater Res, 100, 1536, 10.3139/146.110217

Herzog, 2016, Additive manufacturing of metals, Acta Mater, 117, 371, 10.1016/j.actamat.2016.07.019

Lin, 2017, Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment, J Mech Behav Biomed Mater, 69, 19, 10.1016/j.jmbbm.2016.12.015

Lin, 2016, Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing, Mater Des, 102, 30, 10.1016/j.matdes.2016.04.018

Hirata, 2003, Pulsed arc welding, Weld Int, 17, 98, 10.1533/wint.2003.3075

Baufeld, 2011, Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition, J Mater Process Technol, 211, 1146, 10.1016/j.jmatprotec.2011.01.018

Wang, 2011

Brandl, 2012, Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments, Mater Lett, 81, 84, 10.1016/j.matlet.2012.04.116

Szost, 2016, A comparative study of additive manufacturing techniques: residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components, Mater Des, 89, 559, 10.1016/j.matdes.2015.09.115

Brandl, 2010, Additive manufactured Ti-6Al-4V using welding wire: comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications, Phys Procedia, 5, 595, 10.1016/j.phpro.2010.08.087

Zhang, 2016, Crack path selection at the interface of wrought and wire + arc additive manufactured Ti–6Al–4V, Mater Des, 104, 365, 10.1016/j.matdes.2016.05.027

Brandl, 2012, Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM), Mater Sci Eng A, 532, 295, 10.1016/j.msea.2011.10.095

Wang, 2013, Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V, Metall Mater Trans A, 44, 968, 10.1007/s11661-012-1444-6

Martina, 2012, Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V, J Mater Process Technol, 212, 1377, 10.1016/j.jmatprotec.2012.02.002

Gu, 2016, The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys, J Mater Process Technol, 230, 26, 10.1016/j.jmatprotec.2015.11.006

Wang, 2017, Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer deposition of an Al alloy, J Mater Process Technol, 245, 122, 10.1016/j.jmatprotec.2017.02.019

Brice, 2015, Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing, Mater Sci Eng A, 648, 9, 10.1016/j.msea.2015.08.088

Agrawal, 2007

ASTM, 2005

Baufeld, 2012, Mechanical properties of INCONEL 718 parts manufactured by shaped metal deposition (SMD), J Mater Eng Perform, 21, 1416, 10.1007/s11665-011-0009-y

Xu, 2013, Microstructural evolution and mechanical properties of inconel 625 alloy during pulsed plasma arc deposition process, J Mater Sci Technol, 29, 480, 10.1016/j.jmst.2013.02.010

Bauccio, 1993

Xu, 2013, Effect of deposition strategy on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by pulsed plasma arc deposition, Mater Des, 45, 446, 10.1016/j.matdes.2012.07.013

Wang, 2016, Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding, Mater Sci Eng A, 676, 395, 10.1016/j.msea.2016.09.015

Ding, 2016, Fabricating superior NiAl bronze components through wire arc additive manufacturing, Materials, 9, 652, 10.3390/ma9080652

Guo, 2016, Wire arc additive manufacturing of AZ31 magnesium alloy: grain refinement by adjusting pulse frequency, Materials, 9, 823, 10.3390/ma9100823

Shen, 2015, Fabrication of iron-rich Fe–Al intermetallics using the wire-arc additive manufacturing process, Addit Manuf, 7, 20, 10.1016/j.addma.2015.06.001

Shen, 2016, In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process, Mater Sci Eng A, 669, 118, 10.1016/j.msea.2016.05.047

Ma, 2014, Characterization of in-situ alloyed and additively manufactured titanium aluminides, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 45, 2299, 10.1007/s11663-014-0144-6

Ma, 2015, Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding, Addit Manuf, 8, 71, 10.1016/j.addma.2015.08.001

Abe, 2016, Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing, Precis Eng, 45, 387, 10.1016/j.precisioneng.2016.03.016

Liu, 2013, Additive manufacturing of steel–bronze bimetal by shaped metal deposition: interface characteristics and tensile properties, Int J Adv Manuf Technol, 69, 2131, 10.1007/s00170-013-5191-7

Dong, 2017, Fabrication of copper-rich Cu-Al alloy using the wire-arc additive manufacturing process, Metall Mater Trans B, 10.1007/s11663-017-1071-0

Wu, 2017, Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V, J Mater Process Technol, 250, 304, 10.1016/j.jmatprotec.2017.07.037

Almeida, 2010, Innovative process model of Ti–6Al–4V additive layer manufacturing using cold metal transfer (CMT), Proceedings of the Twenty-First Annual International Solid Freeform Fabrication Symposium

Xiong, 2015, Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing, Int J Adv Manuf Technol, 80, 1767, 10.1007/s00170-015-7112-4

Wang, 2004, Rapid prototyping of 4043 Al-alloy parts by VP-GTAW, J Mater Process Technol, 148, 93, 10.1016/j.jmatprotec.2004.01.058

Cong, 2015, Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy, Int J Adv Manuf Technol, 76, 1593, 10.1007/s00170-014-6346-x

Wang, 2000, Variable polarity GTAW in rapid prototyping of aluminum parts, Proceedings of the 11th Annual Solid Freeform Fabrication Symposium

Tian, 2017, Microstructure evolution of Inconel 625 with 0.4 wt% boron modification during gas tungsten arc deposition, J Alloys Compd, 694, 429, 10.1016/j.jallcom.2016.10.019

Dong, 2017, Fabrication of copper-rich Cu-Al alloy using the wire-arc additive manufacturing process, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 48, 3143, 10.1007/s11663-017-1071-0

Masubuchi, 2013

Colegrove, 2013, Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling, J Mater Process Technol, 213, 1782, 10.1016/j.jmatprotec.2013.04.012

Sames, 2016, The metallurgy and processing science of metal additive manufacturing, Int Mater Rev, 61, 315, 10.1080/09506608.2015.1116649

Mukherjee, 2017, An improved prediction of residual stresses and distortion in additive manufacturing, Comput Mater Sci, 126, 360, 10.1016/j.commatsci.2016.10.003

Edwards, 2013, Electron beam additive manufacturing of titanium components: properties and performance, J Manuf Sci Eng, 135, 061016, 10.1115/1.4025773

Busachi, 2015, Designing a WAAM based manufacturing system for defence applications, Procedia Cirp, 37, 48, 10.1016/j.procir.2015.08.085

Sames, 2014, Effect of process control and powder quality on inconel 718 produced using electron beam melting, 409

Devletian, 1983

Bai, 2017, Porosity evolution in additively manufactured aluminium alloy during high temperature exposure, 012045

What is hot cracking (solidification cracking), in, TWI Ltd, http://www.twi-global.com/technical-knowledge/faqs/material-faqs/faq-what-is-hot-cracking-solidification-cracking/, 2017.

Davis, 2004

Colegrove, 2017, Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components, Scr Mater, 135, 111, 10.1016/j.scriptamat.2016.10.031

Huang, 2012, Effect of cold rolling on microstructure and mechanical properties of AISI 301LN metastable austenitic stainless steels, J Iron Steel Res Int, 19, 59, 10.1016/S1006-706X(12)60153-8

Martina, 2015, Microstructure of interpass rolled wire+ arc additive manufacturing Ti-6Al-4V components, Metall Mater Trans A, 46, 6103, 10.1007/s11661-015-3172-1

Martina, 2014, Residual stress reduction in high pressure interpass rolled wire+ arc additive manufacturing Ti-6Al-4V components, 89

Williams, 2017

Residual stress reduction in high pressure interpass rolled wire þ arc additive manufacturing Ti–6Al–4V components.

Williams, 2017

Donoghue, 2016, The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V, Mater Charact, 114, 103, 10.1016/j.matchar.2016.02.001

Wu, 2018, The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy, J Mater Process Technol, 258, 97, 10.1016/j.jmatprotec.2018.03.024

Cheng, 2003, Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures, Int J Fatigue, 25, 1259, 10.1016/j.ijfatigue.2003.08.020

Li, 2017, Effect of ultrasonic surface rolling at low temperatures on surface layer microstructure and properties of HIP Ti-6Al-4V alloy, Surf Coat Technol, 316, 75, 10.1016/j.surfcoat.2017.01.099

Thông tin
Thông tin xuất bản

Journal of Manufacturing Processes

Tập 35

127-139

Thông tin tác giả