Optimization of wire feed for GTAW based additive manufacturing

Arif, 2008, Modelling of globular transfer considering momentum flux in GMAW, J. Phys. Appl. Phys., 41, 1, 10.1088/0022-3727/41/19/195503 Baufeld, 2009, Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: microstructure and mechanical properties, Int. Conf. Mater. Adv. Technol., 31, s106 Baufeld, 2011, Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti6Al4V components fabricated by laser-beam deposition and shaped metal deposition, J. Mater. Process. Technol., 211, 1146, 10.1016/j.jmatprotec.2011.01.018 Cantin, 2005, Arc power and efficiency in gas tungsten arc welding of aluminium, Sci. Technol. Weld. Joining, 10, 200, 10.1179/174329305X37033 Doodman Tipi, 2015, Frequency control of the drop detachment in the automatic GMAW process, J. Mater. Process. Technol., 216, 248, 10.1016/j.jmatprotec.2014.09.018 Goicoechea, 1992, Surface tension of binary and ternary aluminium alloys of the systems Al-Si-Mg and Al-Zn-Mg, J. Mater. Sci., 27, 5247, 10.1007/PL00020247 Janez, 2000, Mathematical modeling of melting rate in twin-wire welding, J. Mater. Process. Technol., 100, 250, 10.1016/S0924-0136(99)00485-9 Modenesi, 2007, A model for melting rate phenomena in GMA welding, J. Mater. Process. Technol., 189, 199, 10.1016/j.jmatprotec.2007.01.022 Ouyang, 2002, Rapid protyping of 5356-aluminum alloy based on variable polarity gas tungsten arc welding: process control and microstructure, Mater. Manuf. Process., 17, 103, 10.1081/AMP-120002801 Wang, 2001, Rapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy, Proc. Inst. Mech. Eng. B: J. Eng., 215, 1519, 10.1243/0954405011519420 Wang, 2013, Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V, Metall. Mater. Trans. A, 44A, 968, 10.1007/s11661-012-1444-6