Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer deposition of an Al alloy

Ahsan, 2016, Cold metal transfer (CMT) GMAW of zinc-coated steel, Weld. J., 95, 120S Ahsan, 2016, Porosity formation mechanisms in cold metal transfer (CMT) gas metal arc welding (GMAW) of zinc coated steels, Sci. Technol. Weld. Joining, 21, 209, 10.1179/1362171815Y.0000000084 Allum, 1985, Metal transfer in arc welding as a varicose instability. II. Development of model for arc welding, J. Phys. D: Appl. Phys., 18, 1447, 10.1088/0022-3727/18/7/030 Almeida, 2010, Innovative process model of Ti–6Al–4V additive layer manufacturing using cold metal transfer (CMT), 25 Azar, 2015, A heat source model for cold metal transfer (CMT) welding, J. Therm. Anal. Calorim., 122, 741, 10.1007/s10973-015-4809-4 Cao, 2013, Cold metal transfer joining of magnesium AZ31B-to-aluminum A6061-T6, Mater. Sci. Eng. A, 560, 256, 10.1016/j.msea.2012.09.065 Cong, 2015, Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3% Cu alloy, Int. J. Adv. Manuf. Technol., 76, 1593, 10.1007/s00170-014-6346-x Elrefaey, 2015, Effectiveness of cold metal transfer process for welding 7075 aluminium alloys, Sci. Technol. Weld. Joining, 20, 280, 10.1179/1362171815Y.0000000017 Feng, 2009, The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding, Mater. Des., 30, 1850, 10.1016/j.matdes.2008.07.015 Ferraresi, 2003, Metal transfer in the aluminum gas metal arc welding, J. Braz. Soc. Mech. Sci. Eng., 25, 229, 10.1590/S1678-58782003000300003 Hu, 2016, The arc characteristics of cold metal transfer welding with AZ31 magnesium alloy wire, J. Manuf. Process., 24, 298, 10.1016/j.jmapro.2016.10.001 Kumar, 1995, Theoretical investigation of penetration characteristics in gas metal-arc welding using finite element method, Metall. Mater. Trans. B, 26, 611, 10.1007/BF02653882 Lesnewich, 1958, Control of melting rate and metal transfer in gas shielded metal-arc welding: part II- control of electrode melting rate, Weld. J., 37, 418S Lancaster, 1984, The physics of welding, Phys. Technol., 15, 73, 10.1088/0305-4624/15/2/I05 Lin, 2013, Shear strength of CMT brazed lap joints between aluminum and zinc-coated steel, J. Mater. Process. Technol., 213, 1303, 10.1016/j.jmatprotec.2013.02.011 Liu, 2015, Microstructure and mechanical properties of cold metal transfer welded aluminium/nickel lap joints, Sci. Technol. Weld. Joining, 20, 307, 10.1179/1362171815Y.0000000011 Ola, 2014, A study of cold metal transfer clads in nickel-base INCONEL 718 superalloy, Mater. Des., 57, 51, 10.1016/j.matdes.2013.12.060 Pickin, 2006, Evaluation of cold metal transfer (CMT) process for welding aluminium alloy, Sci. Technol. Weld. Joining, 11, 583, 10.1179/174329306X120886 Pickin, 2011, Characterisation of the cold metal transfer (CMT) process and its application for low dilution cladding, J. Mater. Process. Technol., 211, 496, 10.1016/j.jmatprotec.2010.11.005 Schierl, 2005, The CMT process a revolution in welding technology, Weld. World, 49, 38 Zhang, 2009, The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel, Mater. Sci. Eng. A, 499, 111, 10.1016/j.msea.2007.11.124