Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V

Agarwala, 1995, Direct selective laser sintering of metals, Rapid Prototyp. J., 1, 26, 10.1108/13552549510078113 Brandl, 2012, Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM), Mater. Sci. Eng. A, 532, 295, 10.1016/j.msea.2011.10.095 Denlinger, 2015, Effect of inter-layer dwell time on distortion and residual stress inadditive manufacturing of titanium and nickel alloys, J. Mater. Process Technol., 215, 123, 10.1016/j.jmatprotec.2014.07.030 Dewitt, 1988, 989 Ding, 2011, Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts, Comput. Mater. Sci., 50, 3315, 10.1016/j.commatsci.2011.06.023 Ding, 2015, A practical path planning methodology for additive manufacturing of thin-walled structures, Robot. Comput. Integr. Manuf., 34, 8, 10.1016/j.rcim.2015.01.003 Ding, 2016, Fabricating superior NiAl bronze components through wire arc additive manufacturing, Materials, 9, 652, 10.3390/ma9080652 Ding, 2016, Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part, Comput. Aided Des., 73, 66, 10.1016/j.cad.2015.12.003 Fan, 2015, Three-dimensional numerical analysis of interaction between arc and pool by considering the behavior of the metal vapor in tungsten inert gas welding, Acta Phys. Sinica, 64, 108102, 10.7498/aps.64.108102 Geng, 2017, Optimization of wire feed for GTAW based additive manufacturing, J. Mater. Process. Technol., 243, 40, 10.1016/j.jmatprotec.2016.11.027 Hagqvist, 2013, Emissivity estimation for high temperature radiation pyrometry on Ti–6Al–4V, Measurement, 46, 871, 10.1016/j.measurement.2012.10.019 Hong, 2016, Analysis of microstructure and mechanical properties change in laser welding of Ti6Al4 V with a multiphysics prediction model, J. Mater. Process. Technol., 237, 420, 10.1016/j.jmatprotec.2016.06.034 Jacobs, 1995, 1992 Ma, 2015, The effect of location on the microstructure and mechanical properties on in-situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding, Mater. Sci. Eng. A, 631, 230, 10.1016/j.msea.2015.02.051 Ma, 2015, Effect of interpass temperature on in-situ alloying and additivemanufacturing of titanium aluminides using gas tungsten arc welding, Adv. Manuf., 8, 71 Martina, 2012, Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V, J. Mater. Process. Technol., 212, 1377, 10.1016/j.jmatprotec.2012.02.002 Martina, 2015, Microstructure of interpass rolled wire + arc additive manufacturing Ti-6Al-4V components, Metall. Mater. Trans. A, 46, 6103, 10.1007/s11661-015-3172-1 Mathers, 2016 Murr, 2010, Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting, Acta Mater., 58, 1887, 10.1016/j.actamat.2009.11.032 Proefschrift,, 2010, 12 Shen, 2016, Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process, Int. J. Adv. Manuf. Technol. Wahab, 1998, The prediction of the temperature distribution and weld pool geometry in the gas metal arc welding process, J. Mater. Process. Technol., 77, 233, 10.1016/S0924-0136(97)00422-6 Wang, 2014, Influence of thermal oxidation temperature on the microstructural and tribological behavior of Ti6Al4V alloy, Surf. Coat. Technol., 240, 470, 10.1016/j.surfcoat.2014.01.004 Wang, 2016, Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding, Mater. Sci. Eng. A, 676, 395, 10.1016/j.msea.2016.09.015 Waszink, 1983, Experimental investigation of the forces acting on a drop of weld metal, Weld. J., 62, 109 Waszink, 1986, Experimental investigation of drop detachment and drop velocity in GMAW, Weld. J., 65, 289 Zhao, 2011, A 3D dynamic analysis of thermal behavior during single pass multi-layer weld based rapid prototyping, J. Mater. Process Technol., 211, 488, 10.1016/j.jmatprotec.2010.11.002 Zhou, 2016, Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing, Int. J. Heat Mass Tran., 103, 521, 10.1016/j.ijheatmasstransfer.2016.06.084