Investigation on the effect of the expansion angle in the strut-based supersonic combustor

Aerospace Science and Technology - Tập 133 - Trang 108095 - 2023
Xin Li1, Yu Pan1, Chaoyang Liu1, Xiao Liu2
1Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha 410073, China
2College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China

Tài liệu tham khảo

Urzay, 2018, Supersonic combustion in air-breathing propulsion systems for hypersonic flight, Annu. Rev. Fluid Mech., 50, 593, 10.1146/annurev-fluid-122316-045217

Watanabe, 2013, Characteristics of hydrogen jets in supersonic crossflow: large-eddy simulation study, J. Propuls. Power, 29, 661, 10.2514/1.B34521

Manna, 2008, Liquid-fueled strut-based scramjet combustor design: a computational fluid dynamics approach, J. Propuls. Power, 24, 274, 10.2514/1.28333

Wang, 2013, Combustion modes of hydrogen jet combustion in a cavity-based supersonic combustor, Int. J. Hydrog. Energy, 38, 12078, 10.1016/j.ijhydene.2013.06.132

Cai, 2017, Experiments on flame stabilization in a scramjet combustor with a rear-wall-expansion cavity, Int. J. Hydrog. Energy, 42, 26752, 10.1016/j.ijhydene.2017.09.059

Liu, 2019, Characteristics of a cavity-stabilized hydrogen jet flame in a model scramjet combustor, AIAA J., 57, 1624, 10.2514/1.J057346

Berglund

Zhang, 2017, Pressure rising slope variation accompanying with combustion mode transition in a dual-mode combustor, Aerosp. Sci. Technol., 68, 370, 10.1016/j.ast.2017.05.034

Huang, 2015, Investigation on the effect of strut configurations and locations on the combustion performance of a typical scramjet combustor, J. Mech. Sci. Technol., 29, 5485, 10.1007/s12206-015-1150-6

Fureby

Fureby

Genin, 2010, Simulation of turbulent mixing behind a strut injector in supersonic flow, AIAA J., 48, 526, 10.2514/1.43647

Makowka, 2017, Hybrid RANS/LES of a supersonic combustor, Aerosp. Sci. Technol., 69, 563, 10.1016/j.ast.2017.07.025

Pandey, 2016, Numerical investigation on hydrogen-fueled scramjet combustor with parallel strut fuel injector at a flight Mach number of 6, J. Appl. Fluid Mech., 9, 1215, 10.18869/acadpub.jafm.68.228.24082

Dharavath, 2013, Thermochemical exploration of hydrogen combustion in generic scramjet combustor, Aerosp. Sci. Technol., 24, 264, 10.1016/j.ast.2011.11.014

Gao, 2014, Application and theoretical analysis of the flamelet model for supersonic turbulent combustion flows in the scramjet engine, Combust. Theory Model., 18, 652, 10.1080/13647830.2014.962617

Qin, 2017, Flame stabilization mechanism study in a hydrogen-fueled model supersonic combustor under different air inflow conditions, Int. J. Hydrog. Energy, 42, 21360, 10.1016/j.ijhydene.2017.06.237

Qin

Huang, 2017, Simulations of combustion oscillation and flame dynamics in a strut-based supersonic combustor, Int. J. Hydrog. Energy, 42, 8278, 10.1016/j.ijhydene.2016.12.142

Huang, 2020, Application of the sparse-Lagrangian multiple mapping conditioning approach to a model supersonic combustor, Phys. Fluids, 32, 10.1063/5.0026654

Cao, 2022, Vorticity transport in different regions of a strut-based scramjet, AIAA J., 10.2514/1.J061416

Desikan, 2006, Strut-based gaseous injection into a supersonic stream, J. Propuls. Power, 22, 474, 10.2514/1.16770

Jiang, 2021, Influence of trapezoidal lobe strut on fuel mixing and combustion in supersonic combustion chamber, Aerosp. Sci. Technol., 116, 10.1016/j.ast.2021.106841

Gerlinger, 2008, Numerical investigation of mixing and combustion enhancement in supersonic combustors by strut induced streamwise vorticity, Aerosp. Sci. Technol., 12, 159, 10.1016/j.ast.2007.04.003

Fureby

Choubey, 2018, Effect of different wall injection schemes on the flow-field of hydrogen fuelled strut-based scramjet combustor, Acta Astronaut., 145, 93, 10.1016/j.actaastro.2018.01.034

Athithan, 2021, The combustion characteristics of double ramps in a strut-based scramjet combustor, Energies, 14, 831, 10.3390/en14040831

Betelin, 2020, 3D numerical modeling of a cylindrical RDE with an inner body extending out of the nozzle, Acta Astronaut., 176, 628, 10.1016/j.actaastro.2020.03.051

Betelin, 2018, Numerical investigations of hybrid rocket engines, Acta Astronaut., 144, 363, 10.1016/j.actaastro.2018.01.009

Nikitin, 2022, Safety of a rotating detonation engine fed by acetylene – oxygen mixture launching stage, Acta Astronaut., 194, 496, 10.1016/j.actaastro.2021.11.035

Kurganov, 2000, New high-resolution central schemes for nonlinear conservation laws and convection–diffusion equations, J. Comput. Phys., 160, 241, 10.1006/jcph.2000.6459

Chomiak, 1996, Flame liftoff in diesel sprays, Symp., Int., Combust., 26, 2557, 10.1016/S0082-0784(96)80088-9

Li, 2004, An updated comprehensive kinetic model of hydrogen combustion, Int. J. Chem. Kinet., 36, 566, 10.1002/kin.20026

Doran, 2013, Fluid flow, 201

Hirschen, 2009, Infrared thermography and pitot pressure measurements of a scramjet nozzle flowfield, J. Propuls. Power, 25, 1108, 10.2514/1.41787

Liu, 2019, Investigation of influence of detailed chemical kinetics mechanisms for hydrogen on supersonic combustion using large eddy simulation, Int. J. Hydrog. Energy, 44, 5007, 10.1016/j.ijhydene.2019.01.005

Hunt

Liu, 2022, Experimental and numerical investigation of the transition progress of strut-induced wakes in the supersonic flows, Aerosp. Sci. Technol., 120, 10.1016/j.ast.2021.107256

Liu, 2023, Lift-off behaviors of the partially-premixed jet flame in a supersonic vitiated coflow, Aerosp. Sci. Technol., 132, 10.1016/j.ast.2022.108021

Lu, 2010, Three-dimensional direct numerical simulation of a turbulent lifted hydrogen jet flame in heated coflow: a chemical explosive mode analysis, J. Fluid Mech., 652, 45, 10.1017/S002211201000039X