Comparative investigation of strut cavity and wall cavity in supersonic flows

Fry, 2004, A century of ramjet propulsion technology evolution, J. Propuls. Power, 20, 27, 10.2514/1.9178 Krishnamurty, 1955 Rossiter, 1964 Heller, 1971, Flow-induced pressure oscillations in shallow cavities, J. Sound Vib., 18, 545, 10.1016/0022-460X(71)90105-2 Heller, 1975, The physical mechanism of flow-induced pressure fluctuations in cavities and concepts for their suppression, 491 Tam, 1978, On the tones and pressure oscillations induced by flow over rectangular cavities, J. Fluid Mech., 89, 373, 10.1017/S0022112078002657 Rockwell, 1978, Self-sustaining oscillations of flow past cavities, J. Fluids Eng., 100, 152, 10.1115/1.3448624 Baurle, 1998, A study of recessed cavity flowfields for supersonic combustion applications, 938 Ben-Yakar, 2001, Cavity flame-holders for ignition and flame stabilization in scramjets: an overview, J. Propuls. Power, 17, 869, 10.2514/2.5818 Mathur, 2001, Supersonic combustion experiments with a cavity-based fuel injector, J. Propuls. Power, 17, 1305, 10.2514/2.5879 Gruber, 2001, Fundamental studies of cavity-based flameholder concepts for supersonic combustors, J. Propuls. Power, 17, 146, 10.2514/2.5720 Unalmis, 2004, Cavity oscillation mechanisms in high-speed flows, AIAA J., 42, 2035, 10.2514/1.1000 Alam, 2007, A new method of controlling cavity-induced pressure oscillations using sub-cavity, J. Mech. Sci. Technol., 21, 1398, 10.1007/BF03177426 Huang, 2011, Investigation on the flameholding mechanisms in supersonic flows: backward-facing step and cavity flameholder, J. Vis., 14, 63, 10.1007/s12650-010-0064-8 Huang, 2012, Effect of geometric parameters on the drag of the cavity flameholder based on the variance analysis method, Aerosp. Sci. Technol., 21, 24, 10.1016/j.ast.2011.04.009 Huang, 2013, Multiobjective design optimization of the performance for the cavity flameholder in supersonic flows, Aerosp. Sci. Technol., 30, 246, 10.1016/j.ast.2013.08.009 Handa, 2012, Generation and propagation of pressure waves in supersonic deep-cavity flows, Exp. Fluids, 53, 1855, 10.1007/s00348-012-1400-7 Das, 2013, Acoustic and velocity field over 3D cavities, Theor. Appl. Mech. Lett., 3, 10.1063/2.1301201 Vikramaditya, 2013, Amplitude and phase modulation of cavity modes in a supersonic flow, Eur. J. Mech. B, Fluids, 42, 159, 10.1016/j.euromechflu.2013.06.012 Vikramaditya, 2014, Experimental study of influence of trailing wall geometry on cavity oscillations in supersonic flow, Exp. Therm. Fluid Sci., 54, 102, 10.1016/j.expthermflusci.2014.01.013 Handa, 2014, Supersonic mixing enhanced by cavity-induced three-dimensional oscillatory flow, Exp. Fluids, 55, 1, 10.1007/s00348-014-1711-y Maurya, 2015, Effect of aft wall offset and ramp on pressure oscillation from confined supersonic flow over cavity, Exp. Therm. Fluid Sci., 68, 559, 10.1016/j.expthermflusci.2015.06.014 Malhotra, 2016, Aft wall offset effects on open cavities in confined supersonic flow, Exp. Therm. Fluid Sci., 74, 411, 10.1016/j.expthermflusci.2015.12.015 Alam, 2016, Passive enhancement of pressure oscillation in cavity-induced supersonic mixing Gautam, 2017, Experimental study of supersonic flow over cavity with aft wall offset and cavity floor injection, Aerosp. Sci. Technol., 70, 211, 10.1016/j.ast.2017.07.024 Kumar, 2018, Oscillatory mode transition for supersonic open cavity flows, Phys. Fluids, 30, 10.1063/1.5017269 Liu, 2018, Analysis of pressure fluctuation in transonic cavity flows using modal decomposition, Aerosp. Sci. Technol., 77, 819, 10.1016/j.ast.2018.03.033 Ren, 2018, Numerical analysis of supersonic flows over an aft-ramped open-mode cavity, Aerosp. Sci. Technol., 78, 427, 10.1016/j.ast.2018.05.003 Fallah, 2018, The influence of micro air jets on mixing augmentation of fuel in cavity flameholder at supersonic flow, Aerosp. Sci. Technol., 76, 187, 10.1016/j.ast.2018.01.021 Panigrahi, 2019, Effects of subcavity in supersonic cavity flow, Phys. Fluids, 31, 10.1063/1.5079707 Li, 2019, Distribution characteristics and mixing mechanism of a liquid jet injected into a cavity-based supersonic combustor, Aerosp. Sci. Technol., 94, 10.1016/j.ast.2019.105401 Oamjee, 2019, Fuel injection location studies on pylon-cavity aided jet in supersonic crossflow, Aerosp. Sci. Technol., 92, 869, 10.1016/j.ast.2019.07.021 Landsberg, 2019, Inclining and aerodynamically contouring a scramjet cavity's upstream wall, Aerosp. Sci. Technol., 95, 10.1016/j.ast.2019.105490 Trudgian, 2020, Experimental investigation of inclining the upstream wall of a scramjet cavity, Aerosp. Sci. Technol., 99, 10.1016/j.ast.2020.105767 Lakka, 2021, Implication of geometrical configuration of cavity on combustion performance in a strut-based scramjet combustor, Acta Astronaut., 178, 793, 10.1016/j.actaastro.2020.08.040 Guvernyuk, 2021, Experimental study of supersonic flow around an axisymmetric annular cavity at angles of attack, Acta Astronaut., 180, 693, 10.1016/j.actaastro.2021.01.013 Guo, 2019, Flowfield structure characteristics of the hypersonic flow over a cavity: from the continuum to the transition flow regimes, Acta Astronaut., 161, 87, 10.1016/j.actaastro.2019.05.023 Guo, 2022, Influence of flow control on aerodynamic properties of an open cavity in rarefied hypersonic flows, Acta Astronaut., 191, 404, 10.1016/j.actaastro.2021.11.036 Gerlinger, 2008, Numerical investigation of mixing and combustion enhancement in supersonic combustors by strut induced streamwise vorticity, Aerosp. Sci. Technol., 12, 159, 10.1016/j.ast.2007.04.003 Huang, 2015, Investigation on the effect of strut configurations and locations on the combustion performance of a typical scramjet combustor, J. Mech. Sci. Technol., 29, 5485, 10.1007/s12206-015-1150-6 Choubey, 2016, Investigation on the effects of operating variables on the performance of two-strut scramjet combustor, Int. J. Hydrog. Energy, 41, 20753, 10.1016/j.ijhydene.2016.09.157 Soni, 2017, Investigation of strut-ramp injector in a Scramjet combustor: effect of strut geometry, fuel and jet diameter on mixing characteristics, J. Mech. Sci. Technol., 31, 1169, 10.1007/s12206-017-0215-0 Soni, 2018, Role of jet spacing and strut geometry on the formation of large scale structures and mixing characteristics, Phys. Fluids, 30, 10.1063/1.5026375 Zhang, 2018, Combustion stabilizations in a liquid kerosene fueled supersonic combustor equipped with an integrated pilot strut, Aerosp. Sci. Technol., 77, 83, 10.1016/j.ast.2018.02.035 Liao, 2018, Mode transition process in a typical strut-based scramjet combustor based on a parametric study, J. Zhejiang Univ. Sci. A, 19, 431, 10.1631/jzus.A1700617 Aravind, 2019, Supersonic combustion of hydrogen using an improved strut injection scheme, Int. J. Hydrog. Energy, 44, 6257, 10.1016/j.ijhydene.2019.01.064 Qiu, 2020, Flowing residence characteristics in a dual-mode scramjet combustor equipped with strut flame holder, Aerosp. Sci. Technol., 99, 10.1016/j.ast.2020.105718 Jiang, 2021, Influence of trapezoidal lobe strut on fuel mixing and combustion in supersonic combustion chamber, Aerosp. Sci. Technol., 10.1016/j.ast.2021.106841 Huang, 2018, Flame propagation and stabilization in dual-mode scramjet combustors: a survey, Prog. Aerosp. Sci., 101, 13, 10.1016/j.paerosci.2018.06.003 Huang, 2019, Supersonic mixing in airbreathing propulsion systems for hypersonic flights, Prog. Aerosp. Sci., 109, 10.1016/j.paerosci.2019.05.005 Niioka, 1995, Flame stabilization characteristics of strut divided into two parts in supersonic airflow, J. Propuls. Power, 11, 112, 10.2514/3.23847 Minato, 2000, Numerical analysis of combustion around a strut in supersonic airflow, Trans. Jpn. Soc. Aeronaut. Space Sci., 43, 143, 10.2322/tjsass.43.143 Danish, 2013, Characterization of strut-mounted through cavity for scramjet applications Sathiyamoorthy, 2018, Experimental investigation of supersonic combustion in a strut-cavity based combustor, Acta Astronaut., 148, 285, 10.1016/j.actaastro.2018.05.014 Sathiyamoorthy, 2020, Flow visualization and supersonic combustion studies of an acoustically open strut cavity, Acta Astronaut., 175, 128, 10.1016/j.actaastro.2020.05.039 Dhankarghare, 2020, Study of pressure oscillations in open strut cavity, 1367 Zhang, 1988, Computational analysis of unsteady supersonic cavity flows driven by thick shear layers, Aeronaut. J., 92, 365, 10.1017/S0001924000016456 Zhang, 1990, An investigation of supersonic oscillatory cavity flows driven by thick shear layers, Aeronaut. J., 94, 355, 10.1017/S0001924000023319 Anyoji, 2021, Mechanism of supersonic mixing enhancement by a wall-mounted three-dimensional cavity, Acta Astronaut., 188, 491, 10.1016/j.actaastro.2021.08.019 Kitamura, 2010, Improvements of simple low-dissipation AUSM against shock instabilities in consideration of interfacial speed of sound, vol. 1283 Shima, 2011, Parameter-free simple low-dissipation AUSM-family scheme for all speeds, AIAA J., 49, 1693, 10.2514/1.J050905 Kitamura, 2013, Towards shock-stable and accurate hypersonic heating computations: a new pressure flux for AUSM-family schemes, J. Comput. Phys., 245, 62, 10.1016/j.jcp.2013.02.046 Venkatakrishnan, 1993, On the accuracy of limiters and convergence to steady state solutions, 880 Michalak, 2009, Accuracy preserving limiter for the high-order accurate solution of the Euler equations, J. Comput. Phys., 228, 8693, 10.1016/j.jcp.2009.08.021 Hirsch, 2007 Yakhot, 1992, Development of turbulence models for shear flows by a double expansion technique, Phys. Fluids A, Fluid Dyn., 4, 1510, 10.1063/1.858424 Thangam, 1992, Turbulent flow past a backward-facing step: a critical evaluation of two-equation models, AIAA J., 30, 1314, 10.2514/3.11066 Choi, 1994, Applications of an RNG k-epsilon model to compressible turbulent shear layers, 188 Luo, 2011, Investigation of turbulent models for the flow field from a typical strut-based scramjet combustor, vol. 54624, 25 Zingg, 2009, A perspective on turbulence models for aerodynamic flows, Int. J. Comput. Fluid Dyn., 23, 327, 10.1080/10618560902776802 Rizzetta, 1988, Numerical simulation of supersonic flow over a three-dimensional cavity, AIAA J., 26, 799, 10.2514/3.9972 Sun, 2011, Parametric study on self-sustained oscillation characteristics of cavity flameholders in supersonic flows, Proc. Inst. Mech. Eng., G J. Aerosp. Eng., 225, 597, 10.1177/0954410010396158 Mancini, 2021, Predicting high-speed feedback mechanisms in rectangular cavities using lattice-Boltzmann very-large eddy simulations, Aerosp. Sci. Technol., 117, 10.1016/j.ast.2021.106908 Chakraborty, 2005, On the relationships between local vortex identification schemes, J. Fluid Mech., 535, 189, 10.1017/S0022112005004726 Kolár, 2009, Compressibility effect in vortex identification, AIAA J., 47, 473, 10.2514/1.40131 Zhang, 1992, Experimental investigation of supersonic flow over two cavities in tandem, AIAA J., 30, 1182, 10.2514/3.11049