Dimer fatty acid – A renewable building block for high-performance polymeric materials

Akindoyo, 2016, Polyurethane types, synthesis and applications – a review, RSC Adv., 6, 114453, 10.1039/C6RA14525F

Armylisas, 2019, Excellent properties of dimer fatty acid esters as biolubricant produced by catalyst- and solvent-free esterification, Eur. J. Lipid Sci. Technol., 121, 1, 10.1002/ejlt.201900228

Bajpai, 1999, Evaluation of kinetic parameters of dimer acid based metal-containing polyesters using thermogravimetric analysis, Thermochim. Acta, 334, 73, 10.1016/S0040-6031(99)00108-2

Bajpai, 1993, Synthesis of plasticizing polyesters of dimer acid and propane–diol, J. Appl. Polym. Sci., 50, 693, 10.1002/app.1993.070500415

Bajpai, 1988, Polyesters of dimer acid & ethylene glycol, Indian J. Chem., 27A, 635

Biermann, 2011, Oils and fats as renewable raw materials in chemistry, Angew. Chem. - Int. Ed., 50, 3854, 10.1002/anie.201002767

Biermann, 2021, Fatty acids and their derivatives as renewable platform molecules for the chemical industry, Angew. Chem. Int. Ed., 60, 2, 10.1002/anie.202100778

Blache, 2018, New bio-based thermoplastic polyurethane elastomers from isosorbide and rapeseed oil derivatives, Ind. Crops Prod., 121, 303, 10.1016/j.indcrop.2018.05.004

Błażek, 2020, Diamine derivatives of dimerized fatty acids and bio-based polyether polyol as sustainable platforms for the synthesis of non-isocyanate polyurethanes, Polymer, 205, 10.1016/j.polymer.2020.122768

Bueno-Ferrer, 2012, Relationship between morphology, properties and degradation parameters of novative biobased thermoplastic polyurethanes obtained from dimer fatty acids, Polym. Degrad. Stab., 97, 1964, 10.1016/j.polymdegradstab.2012.03.002

Bueno-Ferrer, 2012, Structure and morphology of new bio-based thermoplastic polyurethanes obtained from dimeric fatty acids, Macromol. Mater. Eng., 297, 777, 10.1002/mame.201100278

Burg, 1991, Preparation of meadowfoam dimer acids and dimer esters, and their use as lubricants, J. Am. Oil Chem. Soc., 68, 600, 10.1007/BF02660161

Carr, 2001, Application of dimer acid-based polyamide for xerographic toners for textiles printing, J. Appl. Polym. Sci., 81, 2399, 10.1002/app.1680

Çavuş, 2006, Influence of monofunctional reactants on the physical properties of dimer acid-based polyamides, Polym. Adv. Technol., 17, 30, 10.1002/pat.694

Chandra, 2018, Environmentally friendly polyurethane dispersion derived from dimer acid and citric acid, ACS Sustain Chem. Eng., 6, 16412, 10.1021/acssuschemeng.8b03474

Charlon, 2014, Synthesis, structure and properties of fully biobased thermoplastic polyurethanes, obtained from a diisocyanate based on modified dimer fatty acids, and different renewable diols, Eur. Polym. J., 61, 197, 10.1016/j.eurpolymj.2014.10.012

Chaudhari, 2015, Development of PU coatings from neem oil based alkyds prepared by the monoglyceride route, JAOCS, J. Am. Oil Chemists’ Soc., 92, 733, 10.1007/s11746-015-2642-3

von Czapiewski, 2018, Synthesis of dimer fatty acid methyl esters by catalytic oxidation and reductive amination: an efficient route to branched polyamides, Eur. J. Lipid Sci. Technol., 120, 1, 10.1002/ejlt.201700350

De Keersmaecker, 2015, Hydrogenated dimer acid as a corrosion inhibitor for lead metal substrates in acetic acid, J. Electrochem Soc., 162, C167, 10.1149/2.0461504jes

Domb, 1993, Absorbable biopolymers derived from dimer fatty acids, J. Polym. Sci. A Polym. Chem., 31, 1275, 10.1002/pola.1993.080310523

El Fray, 1999, Dimer fatty acid-modified poly[ester-b-ether]s: synthesis and properties, Polym. - Plast. Technol. Eng., 38, 51, 10.1080/03602559909351559

Etxaniz, 2019, Dispersion characteristics and curing behaviour of waterborne UV crosslinkable polyurethanes based on renewable dimer fatty acid polyesters, J. Polym. Environ., 27, 189, 10.1007/s10924-018-1334-0

Feng, 2007, Synthesis and kinetic studies on dimer fatty acid/polyethylene glycol polyester, J. Polym. Res., 14, 115, 10.1007/s10965-006-9090-6

Freitas, 2015, Lower purity dimer acid based polyamides used as hot melt adhesives: Synthesis and properties, J. Adhes. Sci. Technol., 29, 1860, 10.1080/01694243.2014.1001961

Gogoi, 2017, Waterborne hyperbranched poly(ester amide urethane) thermoset: mechanical, thermal and biodegradation behaviors, Polym. Degrad. Stab., 143, 155, 10.1016/j.polymdegradstab.2017.07.006

Guo, 2004, Preparation and properties of poly(dimer acid–dodecanedioic acid) copolymer and poly(dimer acid–tetradecanedioic acid) copolymer, Polym. Degrad. Stab., 84, 375, 10.1016/j.polymdegradstab.2003.10.012

Hablot, 2008, Polyurethanes based on castor oil: kinetics, chemical, mechanical and thermal properties, Macromol. Mater. Eng., 293, 922, 10.1002/mame.200800185

Hablot, 2010, Dimer acid-based thermoplastic bio-polyamides: reaction kinetics, properties and structure, Polymers, 51, 5895, 10.1016/j.polymer.2010.10.026

Hablot, 2010, Renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres: thermal, physical and mechanical properties, Compos Sci. Technol., 70, 504, 10.1016/j.compscitech.2009.12.001

Hablot, 2010, Yield behaviour of renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres, Compos Sci. Technol., 70, 525, 10.1016/j.compscitech.2009.12.009

Hablot, 2011, Accelerated artificial ageing of new dimer fatty acid-based polyamides, Polym. Degrad. Stab., 96, 1097, 10.1016/j.polymdegradstab.2011.03.006

He, 2017, Synthesis and characterization of dimmer-acid-based nonisocyanate polyurethane and epoxy resin composite, Polymers, 9, 649, 10.3390/polym9120649

He, 2018, Lipase-catalyzed synthesis, properties characterization, and application of bio-based dimer acid cyclocarbonate, Polymers, 10

Hojabri, 2009, Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization, Biomacromolecules, 10, 884, 10.1021/bm801411w

Hojabri, 2010, Novel long chain unsaturated diisocyanate from fatty acid: synthesis, characterization, and application in bio-based polyurethane, J. Polym. Sci. A Polym. Chem., 48, 3302, 10.1002/pola.24114

Huang, 2010, Properties and curing kinetics of C21-based reactive polyamides as epoxy-curing agents derived from tung oil, Polym. J., 42, 51, 10.1038/pj.2009.303

Huang, 2013, Exploration of the complementary properties of biobased epoxies derived from rosin diacid and dimer fatty acid for balanced performance, Ind. Crops Prod., 49, 497, 10.1016/j.indcrop.2013.05.024

Huang, 2018, Organic modification of montmorillonite and effect of catalytic selectivity on the dimerization of unsaturated fatty acid, Turk. J. Chem., 42, 50, 10.3906/kim-1704-61

Huang, 2018, Effects of the structure and composition of montmorillonite on the dimerization of unsaturated fatty acids, J. Braz. Chem. Soc., 29, 1516

Isah, 2021, Synthesis of Dimer Acid 2-Ethylhexyl Esters and their Physicochemical Properties as Biolubricant Base Stock and their Potential as Additive in Commercial Base Oils. JAOCS, J. Am. Oil Chemists’ Soc., 98, 683, 10.1002/aocs.12455

Jain, 2005, Role of polyanhydrides as localized drug carriers, J. Control. Release, 103, 541, 10.1016/j.jconrel.2004.12.021

Jain, 2008, Fatty acid based biodegradable polymer, Polym. Rev., 48, 156, 10.1080/15583720701834232

Jia, 2013, Thermal, physical and mechanical properties of hydrogenated dimer acid-based Nylon 636/Nylon 66 copolymers, Chin. Chem. Lett., 24, 654, 10.1016/j.cclet.2013.04.012

Khare, 2013, Study of Liquid-Crystalline Behaviour of Aliphatic-Aromatic Polyamides Derived from Castor Oil Based Dimer Acid by DSC, Indian J. Adv. Chem. Sci., 2, 238

Koh, 2017, Self-anticorrosion performance efficiency of renewable dimer-acid-based polyol microcapsules containing corrosion inhibitors with two triazole groups, Prog. Org. Coat., 109, 61, 10.1016/j.porgcoat.2017.04.021

Koster, 1998, Active sites in the clay catalysed dimerisation of oleic acid, J. Mol. Catal. A Chem., 134, 159, 10.1016/S1381-1169(98)00032-6

Kubek, 1998, Prolonged seizure suppression by a single implantable polymeric-TRH microdisk preparation, Brain Res, 809, 189, 10.1016/S0006-8993(98)00860-9

Lee, 2013, Synthesis and lubricating properties of dimer acid derivatives based on used vegetable oil, Appl. Chem. Eng., 24, 530

Leonard, 1979, Polymerization-dimer acids, J. Am. Oil Chem. Soc., 56

Li, 2021, Design and synthesis of dimer acid-based waterborne polyurethane as water- and oil-resistant coating for paper substrates, Mater. Des., 211, 10.3390/ma14010211

Li, 2013, New vinyl ester bio-copolymers derived from dimer fatty acids: Preparation, characterization and properties, JAOCS, J. Am. Oil Chemists’ Soc., 90, 695, 10.1007/s11746-013-2206-3

Li, 2014, Chain extension of dimer fatty acid- and sugar-based polyurethanes in aqueous dispersions, Eur. Polym. J., 52, 12, 10.1016/j.eurpolymj.2013.12.007

Li, 2014, Property profile of poly(urethane urea) dispersions containing dimer fatty acid-, sugar- and amino acid-based building blocks, Eur. Polym. J., 59, 8, 10.1016/j.eurpolymj.2014.06.016

Li, 2014, Reactivity and regio-selectivity of renewable building blocks for the synthesis of water-dispersible polyurethane prepolymers, ACS Sustain Chem. Eng., 2, 788, 10.1021/sc400459q

Liu, 2011, Preparation and properties of waterborne polyurethanes with natural dimer fatty acids based polyester polyol as soft segment, Prog. Org. Coat., 72, 612, 10.1016/j.porgcoat.2011.07.002

Liu, 2012, Natural dimer fatty acids based waterborne polyurethane: thermal, mechanical and antihydrolytic properties, J. Macromol. Sci., Part A: Pure Appl. Chem., 49, 1070, 10.1080/10601325.2012.728486

Liu, 2012, The antihydrolytic effect and properties of crosslinked polyurethane containing natural dimer fatty acids building blocks, Macromol. Res, 20, 642, 10.1007/s13233-012-0083-5

Llevot, 2015, Renewable (semi)aromatic polyesters from symmetrical vanillin-based dimers, Polym. Chem., 6, 6058, 10.1039/C5PY00824G

Maisonneuve, 2016, Vegetable oils: a source of polyols for polyurethane materials, OCL, 23, D508, 10.1051/ocl/2016031

Maniar, 1994, Controlled release of a local anesthetic from fatty acid dimer based polyanhydride, J. Control. Release, 30, 233, 10.1016/0168-3659(94)90029-9

Marini, 2014, Elaboration and properties of novel biobased nanocomposites with halloysite nanotubes and thermoplastic polyurethane from dimerized fatty acids, Polym. (Guildf. ), 55, 5226, 10.1016/j.polymer.2014.08.049

Meier, 2019, Plant-oil-based polyamides and polyurethanes: toward sustainable nitrogen-containing thermoplastic materials, Macromol. Rapid Commun., 40, 1, 10.1002/marc.201800524

Meier, 2007, Plant oil renewable resources as green alternatives in polymer science, Chem. Soc. Rev., 36, 1788, 10.1039/b703294c

Melchiors, 2000, Recent developments in aqueous two-component polyurethane (2K-PUR) coatings, Prog. Org. Coat., 40, 99, 10.1016/S0300-9440(00)00123-5

Meng, 2010, Synthesis and properties of hyperbranched polyurethane elastomers based on dimer fatty acid-ethylene glycol polyester diol, e-Polym., 10, 1

Mishra, 2017, High-performance waterborne UV-curable polyurethane dispersion based on thiol–acrylate/thiol–epoxy hybrid networks, J. Coat. Technol. Res, 14, 1069, 10.1007/s11998-016-9906-1

More, 2013, Novel fatty acid based di-isocyanates towards the synthesis of thermoplastic polyurethanes, Eur. Polym. J., 49, 823, 10.1016/j.eurpolymj.2012.12.013

Ngo, 2012, Improved synthesis and characterization of saturated branched-chain fatty acid isomers, Eur. J. Lipid Sci. Technol., 114, 213, 10.1002/ejlt.201000471

Noble, 1997, Waterborne polyurethanes, Prog. Org. Coat., 32, 131, 10.1016/S0300-9440(97)00071-4

Orloff, 1995, Prevention of venous thrombosis in microvascular surgery by transmural release of heparin from a polyanhydride polymer, Surgery, 117, 554, 10.1016/S0039-6060(05)80255-7

Ortiz, 2020, Fully Biobased Epoxy Resins from Fatty Acids and Lignin, Molecules, 25, 1158, 10.3390/molecules25051158

Paraskar, 2020, Influence of amine functionalized graphene oxide on mechanical and thermal properties of epoxy matrix composites, Iran. Polym. J. (Engl. Ed. ), 29, 47, 10.1007/s13726-019-00772-w

Paraskar, 2020, Synthesis of isostearic acid/dimer fatty acid-based polyesteramide polyol for the development of green polyurethane coatings, J. Polym. Environ., 29, 54, 10.1007/s10924-020-01849-x

Paraskar, 2020, Facile synthesis and characterization of renewable dimer acid-based urethane acrylate oligomer and its utilization in UV-curable coatings, Prog. Org. Coat., 149

Paraskar, 2020, Utilization of oleic acid in synthesis of epoxidized soybean oil based green polyurethane coating and its comparative study with petrochemical based polyurethane, J. Polym. Res., 27, 242, 10.1007/s10965-020-02170-w

Paraskar, 2020, Synthesis and characterizations of air-cured polyurethane coatings from vegetable oils and itaconic acid, React. Funct. Polym., 156, 10.1016/j.reactfunctpolym.2020.104734

Paraskar, 2021, Vegetable oil based polyurethane coatings – A sustainable approach: a review, Prog. Org. Coat., 156

Park, 2019, Toughened and hydrophobically modified polyamide 11 copolymers with dimer acids derived from waste vegetable oil, J. Appl. Polym. Sci., 136, 1, 10.1002/app.47174

Petrovic, 2008, Polyurethanes from vegetable oils, Polym. Rev., 48, 109, 10.1080/15583720701834224

Prabhudesai, 2020, Sea buckthorn oil tocopherol extraction’s by‐product utilization in green synthesis of polyurethane coating, Eur. J. Lipid Sci. Technol., 122, 1900387, 10.1002/ejlt.201900387

Radzik, 2020, Modern biopolyamide-based materials: synthesis and modification, Polym. Bull., 77, 501, 10.1007/s00289-019-02718-x

Rajput, 2014, Fatty acids based transparent polyurethane films and coatings, Prog. Org. Coat., 77, 1360, 10.1016/j.porgcoat.2014.04.030

Rajput, 2014, Biobased dimer fatty acid containing two pack polyurethane for wood finished coatings, Prog. Org. Coat., 77, 38, 10.1016/j.porgcoat.2013.07.020

Reaume, 2013, Use of isomerization and hydroisomerization reactions to improve the cold flow properties of vegetable oil based biodiesel, Energ. (Basel), 6, 619

Ren, 2005, Synthesis of polyurethane acrylates by hydrogenated castor oil and dimer-based polyester diol and study on pressure-sensitive adhesive, J. Appl. Polym. Sci., 98, 1814, 10.1002/app.22330

Reulier, 2015, Elaboration, morphology and properties of renewable thermoplastics blends, based on polyamide and polyurethane synthesized from dimer fatty acids, Eur. Polym. J., 67, 418, 10.1016/j.eurpolymj.2014.11.036

Reulier, 2017, Thermomechanical and cyclic behavior of biocomposites based on renewable thermoplastics from dimer fatty acids, J. Appl. Polym. Sci., 134, 1, 10.1002/app.44610

Rix, 2016, Synthesis of fatty acid-based non-isocyanate polyurethanes, NIPUs, in bulk and mini-emulsion, Eur. Polym. J., 84, 863, 10.1016/j.eurpolymj.2016.07.006

Robert, 2016, Itaconic acid-a versatile building block for renewable polyesters with enhanced functionality, Green. Chem., 18, 2922, 10.1039/C6GC00605A

Salimon, 2010, Biolubricants: raw materials, chemical modifications and environmental benefits, Eur. J. Lipid Sci. Technol., 112

Schmidt, 2017, Erythritol dicarbonate as intermediate for solvent- and isocyanate-free tailoring of bio-based polyhydroxyurethane thermoplastics and thermoplastic elastomers, Macromolecules, 50, 2296, 10.1021/acs.macromol.6b02787

Silva, 2021, The prospering of macromolecular materials based on plant oils within the blooming field of polymers from renewable resources, Polym. (Basel), 13

Stanford, 1989, Polyurethanes from renewable resources, Adv. Polym. Sci., 424

Susa, 2018, Understanding the effect of the dianhydride structure on the properties of semiaromatic polyimides containing a biobased fatty diamine, ACS Sustain Chem. Eng., 6, 668, 10.1021/acssuschemeng.7b03026

Tremblay-Parrado, 2020, Renewable responsive systems based on original click and polyurethane cross-linked architectures with advanced properties, ChemSusChem, 13, 238, 10.1002/cssc.201901991

Türünç, 2012, Fatty acid derived renewable polyamides via thiol-ene additions, Green. Chem., 14, 2577, 10.1039/c2gc35982k

Van Haveren, 2007, Resins and additives for powder coatings and alkyd paints, based on renewable resources, J. Coat. Technol. Res., 4, 177, 10.1007/s11998-007-9020-5

Włoch, 2018, The effect of high molecular weight bio-based diamine derivative of dimerized fatty acids obtained from vegetable oils on the structure, morphology and selected properties of poly(ether-urethane-urea)s, J. Polym. Environ., 26, 1592, 10.1007/s10924-017-1059-5

Xuebin, 2019, Studies on the preparation and properties of biodegradable polyester from soybean oil, Green. Process. Synth., 8, 1, 10.1515/gps-2017-0098

Yang, 2019, Synthesis and characterization of rigid polyurethane foam with dimer fatty acid-based polyols, Polym. Bull.

Yasa, 2017, Synthesis of 10-undecenoic acid based C 22 -dimer acid esters and their evaluation as potential lubricant basestocks, Ind. Crops Prod., 103, 141, 10.1016/j.indcrop.2017.04.005

Yu, 2015, Green polyurethane from dimer acid based polyether polyols: Synthesis and characterization, J. Appl. Polym. Sci., 132, 1, 10.1002/app.41410

Zhang, 2019, High biobased carbon content polyurethane dispersions synthesized from fatty acid-based isocyanate, Ind. Eng. Chem. Res, 58, 5195, 10.1021/acs.iecr.8b05936

Zhang, 2019, Development of magnesium oxide–zeolite catalysts for isomerization of fatty acids, Catal. Lett., 149, 303, 10.1007/s10562-018-2601-3

Zhang, 2020, An advanced process for producing structurally selective dimer acids to meet new industrial uses, Ind. Crops Prod., 146, 10.1016/j.indcrop.2020.112132

Zhang, 2019, Preparation and characterization of polyurethane based on dimer acid for environment-friendly controlled release fertilizers, Polym. -Plast. Technol. Mater., 58, 1571