Biomechanical effect of implant design on four implants supporting mandibular full-arch fixed dentures: In vitro test and finite element analysis

Bergendal, 1998, Implant-supported overdentures: a longitudinal prospective study, Int J Oral Maxillofac Implants, 13, 253

Att, 2003, Implant therapy to improve quality of life, Quintessence Int, 34, 573

Adell, 1981, A 15-year study of osseointegrated implants in the treatment of the edentulous jaw, Int J Oral Surg, 10, 387, 10.1016/S0300-9785(81)80077-4

Del Fabbro, 2012, Tilted implants for the rehabilitation of edentulous jaws: a systematic review, Clin Implant Dent Relat Res, 14, 612, 10.1111/j.1708-8208.2010.00288.x

Maló, 2003, “All-on-Four” immediate-function concept with brånemark system® implants for completely edentulous mandibles: a retrospective clinical study, Clin Implant Dent Relat Res, 5, 2, 10.1111/j.1708-8208.2003.tb00010.x

Maló, 2012, “All-on-4” immediate-function concept for completely edentulous maxillae: a clinical report on the medium (3 years) and long-term (5 years) outcomes, Clin Implant Dent Relat Res, 14, 10.1111/j.1708-8208.2011.00395.x

Maló, 2015, All-on-4® Treatment Concept for the Rehabilitation of the Completely edentulous mandible: a 7-year clinical and 5-year radiographic retrospective case series with risk assessment for implant failure and marginal bone level, Clin Implant Dent Relat Res, 17, 10.1111/cid.12282

Baggi, 2013, Implant-bone load transfer mechanisms in complete-arch prostheses supported by four implants: a three-dimensional finite element approach, J Prosthet Dent, 109, 9, 10.1016/S0022-3913(13)60004-9

Balshi, 2014, A Retrospective analysis of 800 brånemark system implants following the all-on-four™ protocol, J Prosthodont, 23, 83, 10.1111/jopr.12089

Geng, 2001, Application of finite element analysis in implant dentistry: a review of the literature, J Prosthet Dent, 85, 585, 10.1067/mpr.2001.115251

Petrie, 2005, Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest: a three-dimensional finite-element analysis, Clin Oral Implants Res, 16, 486, 10.1111/j.1600-0501.2005.01132.x

Huang, 2007, Comparison of implant body designs and threaded designs of dental implants: a 3-dimensional finite element analysis, Int J Oral Maxillofac Implants, 22, 551

Baggi, 2008, Stress-based performance evaluation of osseointegrated dental implants by finite-element simulation, Simul Model Pract Theory, 16, 971, 10.1016/j.simpat.2008.05.009

Isidor, 2006, Influence of forces on peri-implant bone, Clin Oral Implants Res, 17, 8, 10.1111/j.1600-0501.2006.01360.x

Duyck, 2001, The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study, Clin Oral Implants Res, 12, 207, 10.1034/j.1600-0501.2001.012003207.x

Kan, 2014, In vitro bone strain analysis of implant following occlusal overload, Clin Oral Implants Res, 25, 10.1111/clr.12059

Wong, 2011, Review of biomechanical models used in studying the biomechanics of reconstructed mandibles, Int J Oral Maxillofac Implants, 40, 393, 10.1016/j.ijom.2010.11.023

Rangan, 2013, The influence of stress distribution in four different fixation systems used in treatment of mandibular angle fractures–a three-dimensional finite element analysis, Oral Surg, 6, 186

Bonnet, 2009, Biomechanical study of mandible bone supporting a four-implant retained bridge: finite element analysis of the influence of bone anisotropy and foodstuff position, Med Eng Phys, 31, 806, 10.1016/j.medengphy.2009.03.004

Takahashi, 2010, Influence of number and inclination angle of implants on stress distribution in mandibular cortical bone with All-on-4 concept, J Prosthodont Res, 54, 179, 10.1016/j.jpor.2010.04.004

Naini, 2011, Tilted or parallel implant placement in the completely edentulous mandible? A three-dimensional finite element analysis, Int J Oral Maxillofac Implants, 26, 776

Özdemir Doğan, 2014, Evaluation of “All-on-Four” concept and alternative designs with 3d finite element analysis method, Clin Implant Dent Relat Res, 16, 501, 10.1111/cid.12024

Li, 2015, Does matching relation exist between the length and the tilting angle of terminal implants in the all-on-four protocol? stress distributions by 3D finite element analysis, J Adv Prosthodont, 7, 240, 10.4047/jap.2015.7.3.240

Horita, 2017, Biomechanical analysis of immediately loaded implants according to the “All-on-Four” concept, J Prosthodont Res, 61, 123, 10.1016/j.jpor.2016.08.002

Peixoto, 2017, Rehabilitation of the atrophic mandible with short implants in different positions: a finite elements study, Mater Sci Eng C, 80, 122, 10.1016/j.msec.2017.03.310

Ozan, 2018, Biomechanical comparison of different implant inclinations and cantilever lengths in all-on-4 treatment concept by three-dimensional finite element analysis, Int J Oral Maxillofac Implants, 33, 64, 10.11607/jomi.6201

Gümrükçü, 2018, Influence of implant number, length, and tilting degree on stress distribution in atrophic maxilla: a finite element study, Med Biol Eng Comput, 56, 979, 10.1007/s11517-017-1737-4

Kim, 2011, Biomechanical comparison of axial and tilted implants for mandibular full-arch fixed prostheses, Int J Oral Maxillofac Implants, 26, 976

Tiossi, 2017, Biomechanical behavior of titanium and zirconia frameworks for implant-supported full-arch fixed dental prosthesis, Clin Implant Dent Relat Res, 19, 860, 10.1111/cid.12525

Oh, 2002, The causes of early implant bone loss: myth or science?, J Periodontol, 73, 322, 10.1902/jop.2002.73.3.322

Abuhussein, 2010, The effect of thread pattern upon implant osseointegration, Clin Oral Implants Res, 21, 129, 10.1111/j.1600-0501.2009.01800.x

Stoichkov, 2018, Analysis of the causes of dental implant fracture: a retrospective clinical study, Quintessence Int, 49, 279