Rehabilitation of the atrophic mandible with short implants in different positions: A finite elements study

DE Vico, 2011, Rationale for tilted implants: FEA considerations and clinical reports, Oral Implantol., 4, 23

Perdijk, 2011, Implants in the severely resorbed mandibles: whether or not to augment? What is the clinician's preference?, Oral Maxillofac. Surg., 15, 225, 10.1007/s10006-011-0285-6

Stellingsma, 2004, Implantology and the severely resorbed edentulous mandible, Crit. Rev. Oral Biol. Med., 15, 240, 10.1177/154411130401500406

Stellingsma, 2004, The extremely resorbed mandible: a comparative prospective study of 2-year results with 3 treatment strategies, Int. J. Oral Maxillofac. Implants, 19, 563

Blahout, 2007, Quantification of bone resorption in the interforaminal region of the atrophic mandible, Int. J. Oral Maxillofac. Implants, 22, 609

Cawood, 1988, A classification of the edentulous jaws, Int. J. Oral Maxillofac. Surg., 17, 232, 10.1016/S0901-5027(88)80047-X

Adell, 1981, A 15-year study of osseointegrated implants in the treatment of the edentulous jaw, Int. J. Oral Surg., 10, 387, 10.1016/S0300-9785(81)80077-4

Albrektsson, 1986, The long-term efficacy of currently used dental implants: a review and proposed criteria of success, Int. J. Oral Maxillofac. Implants, 1, 11

Esposito, 2015, Short implants versus bone augmentation for placing longer implants in atrophic maxillae: one-year post-loading results of a pilot randomised controlled trial, Eur. J. Oral Implantol., 8, 257

Fugazzotto, 2008, Shorter implants in clinical practice: rationale and treatment results, Int. J. Oral Maxillofac. Implants, 23, 487

Neldam, 2012, State of the art of short dental implants: a systematic review of the literature, Clin. Implant. Dent. Relat. Res., 14, 622, 10.1111/j.1708-8208.2010.00303.x

Srinivasan, 2014, Survival rates of short (6mm) micro-rough surface implants: a review of literature and meta-analysis, Clin. Oral Implants Res., 25, 539, 10.1111/clr.12125

Seker, 2014, Biomechanical effects of different fixed partial denture designs planned on bicortically anchored short, graft-supported long, or 45-degree-inclined long implants in the posterior maxilla: a three-dimensional finite element analysis, Int. J. Oral Maxillofac. Implants, 29, 1, 10.11607/jomi.3264

Renouard, 2005, Short implants in the severely resorbed maxilla: A 2-year retrospective clinical study, Clin. Implant. Dent. Relat. Res., 7, S104, 10.1111/j.1708-8208.2005.tb00082.x

Telleman, 2011, A systematic review of the prognosis of short (<10mm) dental implants placed in the partially edentulous patient, J. Clin. Periodontol., 38, 667, 10.1111/j.1600-051X.2011.01736.x

Friberg, 2000, Long-term follow-up of severely atrophic edentulous mandibles reconstructed with short Brånemark implants, Clin. Implant. Dent. Relat. Res., 2, 184, 10.1111/j.1708-8208.2000.tb00116.x

Tutak, 2013, Short dental implants in reduced alveolar bone height: a review of the literature, Med. Sci. Monit., 19, 1037, 10.12659/MSM.889665

Triplett, 1991, Endosseus cylinder implants in severely atrophic mandibles, Int. J. Oral Maxillofac. Implants, 6, 264

Keller, 1995, Reconstruction of the severely atrophic edentulous mandible with endosseous implants: a 10-year longitudinal study, J. Oral Maxillofac. Surg., 53, 305, 10.1016/0278-2391(95)90231-7

Chrcanovic, 2009, Mandibular fractures associated with endosteal implants, Oral Maxillofac. Surg., 13, 231, 10.1007/s10006-009-0171-7

Oh, 2010, 3rd.Mandibular fracture in conjunction with bicortical penetration, using wide-diameter endosseous dental implants, J. Prosthodont., 19, 625, 10.1111/j.1532-849X.2010.00646.x

Soehardi, 2011, An inventory of mandibular fractures associated with implants in atrophic edentulous mandibles: survey of Dutch oral and maxillofacial surgeons, Int. J. Oral Maxillofac. Implants, 26, 1087

Capelli, 2007, Immediate rehabilitation of the completely edentulous jaw with fixed prostheses supportes by either upright or tilted implants: a multicenter clinical study, Int. J. Oral Maxillofac. Implants, 22, 639

Bevilacqua, 2011, The influence of cantilever length and implant inclination on stress distribution in maxillary implant-supported fixed dentures, J. Prosthet. Dent., 105, 5, 10.1016/S0022-3913(10)60182-5

Bevilacqua, 2008, Three-dimensional finite element analysis of load transmission using different implant inclinations and cantileverlengths, Int. J. Prosthodont., 21, 539

Bellini, 2009, A finite element analysis of tilted versus non-tilted implant configurations in the edentulous maxilla, Int. J. Prosthodont., 22, 155

Cavalli, 2012, Tilted implants for full-arch rehabilitations in completely edentulous maxilla: a retrospective study, Int. J. Dent., 2012, 180379, 10.1155/2012/180379

Maló, 2003, “All-on-Four” immediate-function concept with Brånemark system implants for completely edentulous mandibles: a retrospective clinical study, Clin. Implant. Dent. Relat. Res., 5, 2, 10.1111/j.1708-8208.2003.tb00010.x

Maló, 2006, A pilot study of complete edentulous rehabilitation with immediate function using a new implant design: case series, Clin. Implant. Dent. Relat. Res., 8, 223, 10.1111/j.1708-8208.2006.00024.x

Baggi, 2013, Implant-bone load transfer mechanisms in complete arch prostheses supported by four implants: a three-dimensional finite element approach, J. Prosthet. Dent., 109, 9, 10.1016/S0022-3913(13)60004-9

Silva-Neto, 2014, Stress analysis of different configurations of 3 implants to support a fixed prosthesis in an edentulous jaw, Braz. Oral Res., 28, 67, 10.1590/S1806-83242013005000028

Takahashi, 2010, Influence of number and inclination angle of implants on stress distribution in mandibular cortical bone with all-on-4 concept, J. Prosthodont. Res., 54, 179, 10.1016/j.jpor.2010.04.004

Baggi, 2008, The influence of implant diameter and length on stress distribution of osseointegrated implants related to crestal bone geometry: a three-dimensional finite element analysis, J. Prosthet. Dent., 100, 422, 10.1016/S0022-3913(08)60259-0

DeTolla, 2000, The role of the finite element model in dental implants, J. Oral Implantol., 26, 77, 10.1563/1548-1336(2000)026<0077:TROTFE>2.3.CO;2

Geng, 2001, Application of finite element analysis in implant dentistry: a review of the literature, J. Prosthet. Dent., 85, 585, 10.1067/mpr.2001.115251

Ko, 1992, Effects of posts on dentin stress distribution in pupless teeth, J. Prosthet. Dent., 68, 421, 10.1016/0022-3913(92)90404-X

Eskitascioglu, 2004, The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone: a three-dimensional finite element study, J. Prosthet. Dent., 91, 144, 10.1016/j.prosdent.2003.10.018

Peixoto, 2016, The role of prosthetic abutment material on the stress distribution in a maxillary single implant-supported fixed prosthesis, Mater. Sci. Eng. C, 65, 90, 10.1016/j.msec.2016.04.004

Huang, 2010, Biomechanical simulation of various surface roughnesses and geometric designs on an immediately loaded dental implant, Comput. Biol. Med., 40, 525, 10.1016/j.compbiomed.2010.03.008

Duyck, 2000, Magnitude and distribution of occlusal forces on oral implants supporting fixed prostheses: an in vivo study, Clin. Oral Implants Res., 11, 465, 10.1034/j.1600-0501.2000.011005465.x

Kim, 2011, Biomechanical comparison of axial and tilted implants for mandibular full-arch fixed prostheses, Int. J. Oral Maxillofac. Implants, 26, 976

Gallucci, 2009, Five-year results of fixed implant-supported rehabilitations with distal cantilevers for the edentulous mandible, Clin. Oral Implants Res., 20, 601, 10.1111/j.1600-0501.2008.01699.x

Verri, 2014, Effect of crown-to-implant ratio on peri-implant stress: a finite element analysis, Mater. Sci. Eng. C, 45, 234, 10.1016/j.msec.2014.09.005

Pellizzer, 2015, Analysis of the biomechanical behavior of short implants: the photo-elasticity method, Mater. Sci. Eng. C, 55, 187, 10.1016/j.msec.2015.05.024

Zampelis, 2007, Tilting of splinted implants for improved prosthodontics support: a two-dimensional finite element analysis, J. Prosthet. Dent., 6, S35, 10.1016/S0022-3913(07)60006-7

Lofaj, 2015, Finite element analysis of stress distributions in mono- and bi-cortical dental implants, Mater. Sci. Eng. C, 50, 85, 10.1016/j.msec.2015.01.095

Ferreira, 2014, Non-linear 3D finite element analysis of full-arch implant-supported fixed dentures, Mater. Sci. Eng. C, 38, 306, 10.1016/j.msec.2014.02.021

Faverani, 2014, The influence of bone quality on the biomechanical behavior of full-arch implant-supported fixed prostheses, Mater. Sci. Eng. C, 37, 164, 10.1016/j.msec.2014.01.013

Ferreira, 2014, The role of superstructure material on the stress distribution in mandibular full-arch implant-supported fixed dentures. A CT-based 3D-FEA, Mater. Sci. Eng. C, 35, 92, 10.1016/j.msec.2013.10.022