Implant-bone load transfer mechanisms in complete-arch prostheses supported by four implants: A three-dimensional finite element approach

Ganeles, 2001, Immediate loading of implants with fixed restorations in the completely edentulous mandible: report of 27 patients from private practice, Int J Oral Max Impl, 16, 418

Bocklage, 2002, Rehabilitation of the edentulous maxilla and mandible with fixed implant-supported restorations applying immediate functional loading: A treatment concept, Implant Dent, 11, 154, 10.1097/00008505-200204000-00016

Drago, 1992, Rates of osseointegration of dental implants with regard to anatomical location, J Prosthodont, 1, 29, 10.1111/j.1532-849X.1992.tb00423.x

Shackleton, 1994, Survival of fixed implant-supported prostheses related to cantilever lengths, J Prosthet Dent, 71, 23, 10.1016/0022-3913(94)90250-X

White, 1994, Effect of cantilever length on stress transfer by implant-supported prostheses, J Prosthet Dent, 71, 493, 10.1016/0022-3913(94)90189-9

Sertgöz, 1996, Finite element analysis of the effect of cantilever and implant length on stress distribution in an implant-supported fixed prosthesis, J Prosthet Dent, 76, 165, 10.1016/S0022-3913(96)90301-7

Irving, 1970, Factors concerning bone loss associated with periodontal disease, J Dent Res, 49, 262, 10.1177/00220345700490021001

Carter, 1996, Mechanical factors in bone growth and development, Bone, 18, 5S, 10.1016/8756-3282(95)00373-8

Guo, 2001, Mechanical properties of cortical and cancellous bone tissue, 10.1

Baggi, 2008, The influence of implant diameter and length on stress distribution of osseointegrated implants related to crestal bone geometry: a three-dimensional finite element analysis, J Prosthet Dent, 100, 422, 10.1016/S0022-3913(08)60259-0

Roos-Jansåker, 2006, Nine- to fourteen-year follow-up of implant treatment. Part I: implant loss and associations to various factors, J Clin Periodontol, 33, 283, 10.1111/j.1600-051X.2006.00907.x

Romeo, 2002, Long-term clinical effectiveness of oral implants in the treatment of partial edentulism. Seven-year life table analysis of a prospective study with ITI dental implants system used for single-tooth restorations, Clin Oral Implants Res, 13, 133, 10.1034/j.1600-0501.2002.130203.x

Eckert, 1998, Retrospective review of 1170 endosseous implants placed in partially edentulous jaws, J Prosthet Dent, 79, 415, 10.1016/S0022-3913(98)70155-6

Lekholm, 1999, Survival of the Brånemark implant in partially edentulous jaws: a 10-year prospective multicenter study, Int J Oral Maxillofac Implants, 14, 639

López-Marí, 2009, Implant platform switching concept: An updated review, Med Oral Patol Oral Cir Bucal, 14, e450

Lazzara, 2006, Platform switching: A new concept in implant dentistry for controlling postrestorative crestal bone levels, Int J Periodontics Restorative Dent, 26, 9

Maeda, 2007, Biomechanical analysis on platform switching: is there any biomechanical rationale?, Clin Oral Implants Res, 18, 581, 10.1111/j.1600-0501.2007.01398.x

Krekmanov, 2000, Tilting of posterior mandibular and maxillary implants for improved prosthesis support, Int J Oral Maxillofac Implants, 15, 405

Aparicio, 2001, Tilted implants as an alternative to maxillary sinus grafting: a clinical, radiologic, and periotest study, Clin Implant Dent Relat Res, 3, 39, 10.1111/j.1708-8208.2001.tb00127.x

Calandriello, 2005, Simplified treatment of the atrophic posterior maxilla via immediate/early function and tilted implants: A prospective 1-year clinical study, Clin Implant Dent Relat Res, 7, S1, 10.1111/j.1708-8208.2005.tb00069.x

Capelli, 2007, Immediate rehabilitation of the completely edentulous jaw with fixed prostheses supported by either upright or tilted implants: a multicenter clinical study, Int J Oral Maxillofac Implants, 22, 639

Testori, 2008, Immediate occlusal loading and tilted implants for the rehabilitation of the atrophic edentulous maxilla: 1-year interim result of a multicenter prospective study, Clin Oral Implants Res, 19, 227, 10.1111/j.1600-0501.2007.01472.x

Del Fabbro, 2010, Tilted implants for the rehabilitation of edentulous jaws: A systematic review, Clin Implant Dent Relat Res

Ferreira, 2010, “All-on-four” concept and immediate loading for simultaneous rehabilitation of the atrophic maxilla and mandible with conventional and zygomatic implants, Br J Oral Maxillofac Surg, 48, 218, 10.1016/j.bjoms.2009.08.017

Romanos, 2004, Present status of immediate loading of oral implants, J Oral Implantol, 30, 189, 10.1563/1548-1336(2004)30<189:PSOILO>2.0.CO;2

Eccellente, 2010, A new treatment concept for immediate loading of implants inserted in the edentulous mandible, Quintessence Int, 41, 489

Khatami, 2008, “All-on-Four” immediate function concept and clinical report of treatment of an edentulous mandible with a fixed complete denture and milled titanium framework, J Prosthodont, 17, 47, 10.1111/j.1532-849X.2007.00246.x

Maló, 2005, All-on-4 immediate-function concept with Brånemark System implants for completely edentulous maxillae: a 1-year retrospective clinical study, Clin Oral Implants Res, 7, S88

Degidi, 2005, A 7-year follow-up of 93 immediately loaded titanium dental implants, J Oral Implantol, 31, 25, 10.1563/0-730.1

Portmann, 2006, Report of a case receiving full-arch rehabilitation in both jaws using immediate implant loading protocols: a 1-year resonance frequency analysis follow-up, Clin Implant Dent Relat Res, 8, 25, 10.2310/j.6480.2005.00027.x

Pomares, 2010, A retrospective study of edentulous patients rehabilitated according to the ‘all-on-four’ or the ‘all-on-six’ immediate function concept using flapless computer-guided implant surgery, Eur J Oral Implantol, 3, 155

Clelland, 1993, A photoelastic and strain gauge analysis of angled abutments for an implant system, Int J Oral Maxillofac Implants, 8, 541

Begg, 2009, Stress patterns around distal angled implants in the all-on-four concept configuration, Int J Oral Maxillofac Implants, 24, 663

Baggi, 2008, Stress-based performance evaluation of osseointegrated dental implants, Simul Model Pract Theory, 16, 971, 10.1016/j.simpat.2008.05.009

Van Staden, 2006, Application of the finite element method in dental implant research, Comput Methods Biomech Biomed Engin, 9, 257, 10.1080/10255840600837074

Petrie, 2005, Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis, Clin Oral Implants Res, 16, 486, 10.1111/j.1600-0501.2005.01132.x

Chun, 2006, Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis, Int J Oral Maxillofac Implants, 21, 195

Kitagawa, 2005, Influence of cortical bone quality on stress distribution in bone around dental implant, Dent Mater J, 24, 219, 10.4012/dmj.24.219

Bevilacqua, 2008, Three-dimensional finite element analysis of load transmission using different implant inclinations and cantilever lengths, Int J Prosthodont, 21, 539

Bevilacqua, 2011, The influence of cantilever length and implant inclination on stress distribution in maxillary implant-supported fixed dentures, J Prosthet Dent, 105, 5, 10.1016/S0022-3913(10)60182-5

Bellini, 2009, A finite element analysis of tilted versus non-tilted implant configurations in the edentulous maxilla, Int J Prosthodont, 22, 155

Zampelis, 2007, Tilting of splinted implants for improved prosthodontic support: a two-dimensional finite element analysis, J Prosthet Dent, 6, S35, 10.1016/S0022-3913(07)60006-7

Bonnet, 2009, Biomechanical study of mandible bone supporting a four-implant retained bridge: finite element analysis of the influence of bone anisotropy and foodstuff position, Med Eng Phys, 31, 806, 10.1016/j.medengphy.2009.03.004

Silva, 2010, Stress patterns on implants in prostheses supported by four or six implants: a three-dimensional finite element analysis, Int J Oral Maxillofac Implants, 25, 239

Degidi, 2009, Bone formation around a dental implant with a platform switching and another with a TissueCare Connection. A histologic and histomorphometric evaluation in man, Titanium, 1, 10

Abboud, 2005, Immediate loading of single tooth implants in the posterior region, Int J Oral Maxillofac Implants, 20, 61

Shin, 2006, Radiographic evaluation of marginal bone level around implants with different neck designs after 1 year, Int J Oral Maxillofac Implants, 21, 789

Lemon, 2007, Biomaterials for dental implants, 271

Natali, 2003, Mechanics of bone tissue, 1

Beek, 2000, Three-dimensional finite element analysis of the human temporomandibular joint disc, J Biomech, 33, 307, 10.1016/S0021-9290(99)00168-2

Lekholm, 1985, Patient selection and preparation, 199

Trainor, 1995, Modelling of forces in the human masticatory system with optimization of the angulations of the joint loads, J Biomech, 28, 829, 10.1016/0021-9290(94)00128-Q