Stress-based performance evaluation of osseointegrated dental implants by finite-element simulation

Arkça, 2002, Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in bone, J. Dent., 30, 40 Asmussen, 2005, Finite element analysis of stresses in endodontically treated, dowel-restored teeth, J. Prosthet. Dent., 94, 321, 10.1016/j.prosdent.2005.07.003 Ausiello, 2002, Effect of adhesive layer properties on stress distribution in composite restorations: a 3D finite element analysis, Dent. Mater., 18, 295, 10.1016/S0109-5641(01)00042-2 Becker, 2000, Implant-retained cantilever fixed prosthesis: where and when, J. Prosthet. Dent., 84, 432, 10.1067/mpr.2000.110259 Bozkaya, 2004, Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis, J. Prosthet. Dent., 92, 523, 10.1016/j.prosdent.2004.07.024 Brunski, 1997, Biomechanics of dental implants, 63 Callan, 1998, Loss of crestal bone around dental implants: a retrospective study, Implant Dent., 7, 258, 10.1097/00008505-199807040-00003 Carter, 1996, Mechanical factors in bone growth and development, Bone, 18, S5, 10.1016/8756-3282(95)00373-8 Chen, 2005, Anchorage effects of a palatal osseointegrated implant with different fixation: a finite element study, Angle Orthod., 75, 593 Chun, 2002, Evaluation of design parameters of osseointegrated dental implants using finite element analysis, J. Oral Rehabil., 29, 565, 10.1046/j.1365-2842.2002.00891.x Chun, 2005, Stress distributions in maxillary bone surrounding dental implants with different overdenture attachments, J. Oral Rehabil., 32, 193, 10.1111/j.1365-2842.2004.01407.x Chun, 2006, Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis, Int. J. Oral Maxillofac. Implants, 21, 195 Chun-Li, 2005, Effects of dental implant length and bone quality on biomechanical responses in bone around implants: a 3D non-linear finite element analysis, Biomed. Eng. Appl. Basis Comm., 17, 44, 10.4015/S1016237205000081 Cochran, 1999, A comparison of endosseous dental implant surfaces, J. Periodontol., 70, 1523, 10.1902/jop.1999.70.12.1523 Cowin, 2001 Dalstra, 2004, Load transfer of miniscrews for orthodontic anchorage, Orthodontics, 1, 53 Drago, 1992, Rates of osseointegration of dental implants with regard to anatomic locations, J. Prosthodont., 1, 29, 10.1111/j.1532-849X.1992.tb00423.x Eckert, 1998, Retrospective review of 1170 endosseous implants placed in partially edentulous jaws, J. Prosthet. Dent., 79, 415, 10.1016/S0022-3913(98)70155-6 Gardner, 2005, Platform switching as a means to achieving implant aesthetics, N.Y. State Dent. J., 71, 34 Geng, 2001, Application of finite element analysis in implant dentistry: a review of the literature, J. Prosthet. Dent., 85, 585, 10.1067/mpr.2001.115251 Hermann, 2007, Factors influencing the preservation of the periimplant marginal bone, Implant Dent., 16, 165, 10.1097/ID.0b013e318065aa81 Hermann, 2001, Influence of the size of the microgap on crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged implants in the canine mandible, J. Periodontol., 72, 1372, 10.1902/jop.2001.72.10.1372 Himmlová, 2004, Influence of implant length and diameter on stress distribution: a finite element analysis, J. Prosthet. Dent., 91, 20, 10.1016/j.prosdent.2003.08.008 Holmgren, 1998, Evaluating parameters of osseointegrated dental implants using finite element analysis – a two dimensional comparative study examining the effects of implant diameter, implant shape, and load direction, J. Oral. Implantol., 24, 80, 10.1563/1548-1336(1998)024<0080:EPOODI>2.3.CO;2 Huang, 2005, Effect of splinted prosthesis supported a wide implant or two implants: a three-dimensional finite element analysis, Clin. Oral Implants Res., 16, 466, 10.1111/j.1600-0501.2005.01124.x Ibrahim, 2004, Influence of occlusal forces on stress distribution in preloaded dental implant screws, J. Prosthet. Dent., 91, 319, 10.1016/j.prosdent.2004.01.016 Irving, 1970, Factors concerning bone loss associated with periodontal disease, J. Dent. Res., 49, 262, 10.1177/00220345700490021001 Jemt, 1996, A 5-year prospective multicenter follow-up report on overdentures supported by osseointegrated implants, Int. J. Oral Maxillofac. Implants, 11, 291 Joshi, 2001, Mechanical performance of endodontically treated teeth, Finite Elem. Anal. Des., 37, 587, 10.1016/S0168-874X(00)00059-7 Kitagawa, 2005, Influence of cortical bone quality on stress distribution in bone around dental implant, Dent. Mater. J., 24, 219, 10.4012/dmj.24.219 Kyung, 2003, Development of orthodontic micro-implants for intraoral anchorage, J. Clin. Orthod., 37, 321 Lazzara, 2006, Platform switching: a new concept in implant dentistry for controlling postrestorative crestal bone levels, Int. J. Periodontics Restorative Dent., 26, 9 Lekholm, 1999, Survival of the Branemark implant in partially edentulous jaws: a 10-year prospective multicenter study, Int. J. Oral Maxillofac. Implants, 14, 639 Lekholm, 1985, Patient selection and preparation, 199 Lemon, 1999, Biomaterials for dental implants, 271 Maceri, 2007, Mechanical behaviour of endodontic restorations with multiple prefabricated posts: a finite element approach, J. Biomech., 40, 2386, 10.1016/j.jbiomech.2006.11.018 Maeda, 2007, Biomechanical analysis on platform switching: is there any biomechanical rationale?, Clin. Oral Implants Res., 18, 581, 10.1111/j.1600-0501.2007.01398.x Mah, 2005, Temporary anchorage devices: a status report, J. Clin. Orthod., 39, 132 Martin, 1998 Misch, 1999, A scientific rationale for dental implant design, 329 Natali, 2003, Mechanics of bone tissue, 1 Natali, 2003, Numerical approach to dental biomechanics, 211 Natali, 2002, A comparative analysis based on different strength criteria for evaluation of risk factor for dental implants, Comput. Methods Biomech. Biomed. Eng., 5, 511, 10.1080/10255840290032144 Natali, 2006, Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis, Dent. Mater., 22, 388, 10.1016/j.dental.2005.08.001 Papadopoulos, 2007, The use of miniscrew implants for temporary skeletal anchorage in orthodontics: a comprehensive review, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod., 103, e6, 10.1016/j.tripleo.2006.11.022 Petrie, 2005, Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis, Clin. Oral Implants Res., 16, 486, 10.1111/j.1600-0501.2005.01132.x Piattelli, 1996, Microscopical aspects of failure in osseointegrated dental implants: a report of five cases, Biomaterials, 17, 1235, 10.1016/0142-9612(96)84944-1 Rho, 1993, Young’s modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements, J. Biomech., 26, 111, 10.1016/0021-9290(93)90042-D Roos-Jansåker, 2006, Nine- to fourteen-year follow-up of implant treatment. Part I: implant loss and associations to various factors, J. Clin. Periodontol., 33, 283, 10.1111/j.1600-051X.2006.00907.x Saab, 2007, Effect of abutment angulation on the strain on the bone around an implant in the anterior maxilla: a finite element study, J. Prosthet. Dent., 97, 85, 10.1016/j.prosdent.2006.12.002 Sawako, 2004, The influence of implant location and length on stress distribution for three-unit implant-supported posterior cantilever fixed partial dentures, J. Prosthet. Dent., 91, 234, 10.1016/j.prosdent.2003.12.017 Shin, 2006, Radiographic evaluation of marginal bone level around implants with different neck designs after 1 year, Int. J. Oral Maxillofac. Implants, 21, 789 Tonetti, 1999, Determination of the success and failure of root-form osseointegrated dental implants, Adv. Dent. Res., 13, 173, 10.1177/08959374990130010801 Truesdell, 1960, The classical field theories, vol. III/1 G. Vairo, Modellazione geometrica di interventi odontoiatrici per la simulazione del comportamento meccanico di denti curati (in Italian), in: Proc. ISCS National Meeting 2003, Cuen, Napoli, 2005, pp. 177–186. Van Staden, 2006, Application of the finite element method in dental implant research, Comput. Methods Biomech. Biomed. Eng., 9, 257, 10.1080/10255840600837074 Weyant, 2003, Short-term clinical success of root-form titanium implant systems, J. Evid. Based Dent. Pract., 3, 127, 10.1016/S1532-3382(03)00063-0 Zienkiewicz, 1998 Zienkiewicz, 1987, A simple error estimator and adaptive procedure for practical engineering analysis, Int. J. Numer. Method Eng., 24, 337, 10.1002/nme.1620240206