Early-age crack-free ultra-high-performance concrete under restrained ring test for large-scale production as an overlay

Construction and Building Materials - Tập 409 - Trang 133949 - 2023
Reid Holland1, Jiang Du2, Adi Obeidah1, Weina Meng2, Hani Nassif1
1Rutgers Infrastructure Monitoring and Evaluation (RIME) Group, Department of Civil and Environmental Engineering, Rutgers, the State University of New Jersey, Piscataway, NJ, 08854, United States
2Department of Civil and Environmental Engineering, Stevens Institute of Technology, Hoboken, NJ, 07030, United States

Tài liệu tham khảo

Bajaber, 2021, UHPC evolution, development, and utilization in construction: a Review, J. Mater. Res. Technol., 10, 1058, 10.1016/j.jmrt.2020.12.051

ASTM, 2017, C1856, standard practice for fabricating and testing specimens of ultra-high performance, Concrete

B. Graybeal, J. Hartman. Testing of Ultra-High-Performance Concrete Girders. PCI Journal, vol. 47, no. 1, 1 Jan. 2002, pp. 148–149.

K. Wille, C. Boisvert-Cotulio. Development of Non-Proprietary Ultra-High Performance Concrete for Use in the Highway Bridge Sector, Report No. FHWA-HRT-13-100, 2013, p. 59. https://rosap.ntl.bts.gov/view/dot/34789.

W. Meng et al. Development of Cost-Effective Ultra High-Performance Concrete (UHPC) for Field Implementation in New Jersey. 31 Dec. 2020.

Abokifa, 2021, Full-scale testing of non-proprietary ultra-high performance concrete for deck bulb tee longitudinal field joints, Eng. Struct., 243, 10.1016/j.engstruct.2021.112696

Liu, 2022, Restrained shrinkage behavior of internally-cured UHPC using calcined bauxite aggregate in the ring test and UHPC-concrete composite slab, Cem. Concr. Compos., 134, 10.1016/j.cemconcomp.2022.104805

M. Lukovic, G. Ye, K. Van Breugel . Reliable concrete repair: A critical review. 14th International Conference Structural Faults and Repair, Edinburgh, Scotland, UK, 3-5 July, 2012. http://resolver.tudelft.nl/uuid:0bb2bee0-027c-4384-a1fc-c995c9bba1c0.

Teng, 2021, Design and performance of low shrinkage UHPC for thin bonded bridge deck overlay, Cem. Concr. Compos., 118, 10.1016/j.cemconcomp.2021.103953

Meng, 2017, Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete, Cem. Concr. Res., 101, 46, 10.1016/j.cemconres.2017.08.018

Khayat, 2018, Design and performance of cost-effective ultra high performance concrete for bridge deck overlays (No. cmr 18–006). Missouri, Dept. of Transportation

Valipour, 2018, Coupled effect of shrinkage-mitigating admixtures and saturated lightweight sand on shrinkage of UHPC for overlay applications, Constr. Build. Mater., 184, 320, 10.1016/j.conbuildmat.2018.06.191

Huang, 2022, Use of saturated lightweight sand to improve the mechanical and microstructural properties of UHPC with fiber alignment, Cem. Concr. Compos., 129

Liu, 2021, Microstructural and micromechanical characteristics of ultra-high performance concrete with superabsorbent polymer (SAP), Cem. Concr. Res., 149, 10.1016/j.cemconres.2021.106560

Liu, 2022, Solving shrinkage problem of ultra-high-performance concrete by a combined use of expansive agent, super absorbent polymer, and shrinkage-reducing agent, Compos. B Eng., 230, 10.1016/j.compositesb.2021.109503

Shen, 2020, Investigation on expansion effect of the expansive agents in ultra-high performance concrete, Cem. Concr. Compos., 105, 10.1016/j.cemconcomp.2019.103425

Li, 2021, Mitigation on the autogenous shrinkage of ultra-high performance concrete via using MgO expansive agent, Constr. Build. Mater., 312, 10.1016/j.conbuildmat.2021.125422

Yoo, 2021, Effect of calcium sulfoaluminate-based expansive agent on rate dependent pullout behavior of straight steel fiber embedded in UHPC, Cem. Concr. Res., 122, 196, 10.1016/j.cemconres.2019.04.021

Li, 2020, Effects of steel slag powder and expansive agent on the properties of ultra-high performance concrete (UHPC): based on a case study, Materials (basel)., 13, 683, 10.3390/ma13030683

Anshuang, 2017, Effects of shrinkage reducing agent and expansive admixture on the volume deformation of ultrahigh performance concrete, Adv. Mater. Sci. Eng., 10.1155/2017/6384859

L. Teng, K. H. Khayat. Shrinkage-Reduction of UHPC for Bridge Deck Overlays,International Interactive Symposium on Ultra-High Performance Concrete2(1). https://doi.org/10.21838/uhpc.9738.

Weiss, 2008, Performance of shrinkage-reducing admixtures at different humidities and at early ages, ACI Mater. J., 105, 478

Wyrzykowski, 2015, Plastic shrinkage of mortars with shrinkage reducing admixture and lightweight aggregates studied by neutron tomography, Cem. Concr. Res., 73, 238, 10.1016/j.cemconres.2015.03.013

Soliman, 2014, Effects of shrinkage reducing admixture and wollastonite microfiber on early-age behavior of ultra-high performance concrete, Cem. Concr. Compos., 46, 81, 10.1016/j.cemconcomp.2013.11.008

Yang, 2019, Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete–a review, Compos. B Eng., 178, 10.1016/j.compositesb.2019.107456

Du, 2021, New development of ultra-high-performance concrete (UHPC), Compos. B Eng., 224, 10.1016/j.compositesb.2021.109220

H. G. Russel, B. A. Graybeal. Ultra-High Performance Concrete: A State-Of-The-Art Report for the Bridge Community. Report No. FHWA-HRT-13-060, 2013.https://rosap.ntl.bts.gov/view/dot/26387.

Han, 2015, The shrinkage of reactive powder concrete in early age and its control methods, China Railway Sci., 36, 40

Wyrzykowski, 2018, Expansive high-performance concrete for chemical-prestress applications, Cement Concr. Res., 107, 275, 10.1016/j.cemconres.2018.02.018

Park, 2013, Drying Shrinkage Cracking Characteristics of Ultra-High-Performance Fibre Reinforced Concrete with Expansive and Shrinkage Reducing Agents, Mag. Concr. Res., 65, 248, 10.1680/macr.12.00069

Li, 2017, Efficacy of internal curing combined with expansive agent in mitigating shrinkage deformation of concrete under variable temperature condition, Constr. Build. Mater., 145, 354, 10.1016/j.conbuildmat.2017.04.021

Yoo, 2015, Effectiveness of shrinkage reducing admixture in reducing autogenous shrinkage stress of ultrahigh-performance fiber-reinforced concrete, Cem. Concr. Compos., 64, 27, 10.1016/j.cemconcomp.2015.09.005

Wang, 2019, Restrained shrinkage mechanism of ultra high performance concrete, KSCE J. Civ. Eng., 23, 4481, 10.1007/s12205-019-0387-5

Yoo, 2013, Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age, Constr. Build. Mater., 73, 357, 10.1016/j.conbuildmat.2014.09.097

Meng, 2016, Optimization and performance of cost-effective ultra-high performance concrete, Mater. Struct., 50, 29, 10.1617/s11527-016-0896-3

Park, 2014, Benefits of using expansive and shrinkage-reducing agents in UHPC for volume stability, Mag. Concr. Res., 66, 745, 10.1680/macr.13.00317

El-Tawil, 2018, Commercial production of non-proprietary ultra high performance concrete (No RC-1670), Michigan. Dept. of Transportation. Research Administration

ASTM C1437-20, Standard Test Method for Flow of Hydraulic Cement Mortar. 2020.

ASTM C266, Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore. 2020.

ASTM C109, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). 2020.

Astm, 2020, C469, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in, Compression.

Astm, 2021, C496–96, Standard Test Method for Splitting Tensile Strength of, Cylindrical Concrete Specimens.

ASTM C1698-09, Standard Test Method for Autogenous Strain of Cement Paste and Mortar. 2014.

ASTM C157-75, Standard Test Method for Length Change Of Hardened Cement Mortar And Concrete. 2018.

AASHTO PP 34, Estimating the Cracking Tendency of Concrete. 2006.

ASTM C882, Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear. 2020.

ASTM C1761, Standard Specification for Lightweight Aggregate for Internal Curing of Concrete. 2017.

Li, 2017, Effect of PCE-type superplasticizer on early-age behavior of ultra-high performance concrete (UHPC), Constr. Build. Mater., 153, 740, 10.1016/j.conbuildmat.2017.07.145

Menu, 2020, Assessing the shrinkage cracking potential of concrete using ring specimens with different boundary conditions, Adv. Mater. Sci. Eng., 1, 10.1155/2020/4842369

H. T. See, E. K. Attiogbe, M.A. Miltenberger. Shrinkage Cracking Characteristics of Concrete Using Ring Specimens. ACI Materials Journal, Vol 100, No. 3, May–June 2003, pp. 239–245. https://doi.org/10.14359/12625.

E. K. Attiogbe, H. T. See, M. A. Miltenberger. Tensile Creep in Restrained Shrinkage. Creep, Shrinkage and Durability Mechanics of Concrete and other Quasi-Brittle Materials, Proceedings of the Sixth International Conference, F.J. Ulm, Z.P. Bazant and F.H. Wittmann (eds.), Aug. 2001, pp. 651–656.

H. T. See, E. K. Attiogbe. M. A. Miltenberger. Potential for Restrained Shrinkage Cracking of Concrete and Mortar. Cement Concrete and Aggregates. 26, 2004, pp: 1-8. https://doi.org/10.1520/CCA12305.

Hossain, 1834, Quantifying early-age stress development and cracking in low water-to-cement concrete: restrained-ring test with acoustic emission, Transp. Res. Rec., 2003, 24

M. Berry, R. Scherr, K. Matteson.Feasibility of Non-Proprietary Ultra-High Performance Concrete (UHPC) for use in Highway Bridges in Montana: Phase II Field Application. No. FHWA/MT-21-002/9578-606. Montana. Dept. of Transportation. Research Programs, 2021. https://doi.org/10.21949/1518311.

Graybeal, 2011, Ultra-high performance concrete. technote, FHWA-HRT-11-038, federal highway administration, McLean VA

Sbia, 2017, Study on field thermal curing of ultra-high-performance concrete employing heat of hydration, ACI Mater. J., 2017, 114

Thông tin
Thông tin xuất bản

Construction and Building Materials

Tập 409

133949

Thông tin tác giả