Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age

Richard, 1995, Composition of reactive powder concretes, Cem Concr Res, 25, 1501, 10.1016/0008-8846(95)00144-2 Kim SW, Park JJ, Kang ST, Ryo GS, Koh KT. Development of ultra high performance cementitious composites (UHPCC) in Korea. In: Proceedings of the fourth international IABMAS conference, Seoul, Korea; 2008. p. 110. Kobler M, Sobek W. The introduction of high forces into tine-walled UHPC elements by the use of implants. In: Proceedings of the second international symposium on ultra high performance concrete, Kassel, Germany; 2008. p. 683–90. di Prisco M, Lamperti M, Lapolla S, Khurana RS. HPFRCC thin plates for precast roofing. In: Proceedings of the second international symposium on ultra high performance concrete, Kassel, Germany; 2008. p. 675–82. Lee, 2011, Design of UHPC(ultra high performance concrete) girder cable stayed footbridge, Mag Korea Concr Inst, 23, 38 Saleem, 2011, Ultra-high-performance concrete bridge deck reinforced with high-strength steel, ACI Struct J, 108, 601 Koh, 2011, Shrinkage properties of ultra-high performance concrete (UHPC), Adv Sci Lett, 4, 948, 10.1166/asl.2011.1505 Yoo, 2014, Influence of reinforcing bar type on autogenous shrinkage stress and bond behavior of ultra high performance fiber reinforced concrete, Cem Concr Compos, 48, 150, 10.1016/j.cemconcomp.2013.11.014 Yoo, 2014, Influence of ring size on the restrained shrinkage behavior of ultra high performance fiber reinforced concrete, Mater Struct, 47, 1161, 10.1617/s11527-013-0119-0 Park, 2014, Benefits of using expansive and shrinkage reducing agents in ultra-high-performance concrete for volume stability, Mag Concr Res, 66, 745, 10.1680/macr.13.00317 Park, 2013, Drying shrinkage cracking characteristics of ultra-high-performance fibre reinforced concrete with expansive and shrinkage reducing agents, Mag Concr Res, 65, 248, 10.1680/macr.12.00069 Habel, 2006, Autogenous deformations and viscoelasticity of UHPFRC in structures. Part 1: Experimental results, Mag Concr Res, 58, 135, 10.1680/macr.2006.58.3.135 American Society for Testing and Materials (ASTM), 2009, ASTM C 1581 Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage Korea Standard Association (KSA), 2009, KS F 2595 Standard test method for dry shrinkage crack in concrete, Seoul Maltese, 2005, Combined effect of expansive and shrinkage reducing admixtures to obtain stable and durable mortars, Cem Concr Res, 35, 2244, 10.1016/j.cemconres.2004.11.021 Kim, 2013, State-of-the-art of UHPC applications in the World, Korean Soc Civil Eng, 61, 39 Park, 2008, Influence of the ingredients on the compressive strength of UHPC as a fundamental study to optimize the mixing proportion, 105 American Society for Testing and Materials (ASTM), 2012, ASTM C 39/C 39M Standard test method for compressive strength of cylindrical concrete specimens American Society for Testing and Materials (ASTM), 2006, ASTM C 1609/C 1609M Standard test method for flexural performance of fiber-reinforced concrete (using beam with third point loading) Yoo, 2013, Effect of shrinkage reducing admixture on tensile and flexural behaviors of UHPFRC considering fiber distribution characteristics, Cem Concr Res, 54, 180, 10.1016/j.cemconres.2013.09.006 Kanakubo, 2006, Tensile characteristics evaluation method for ductile fiber-reinforced cementitious composites, J Adv Concr Technol, 4, 3, 10.3151/jact.4.3 See, 2003, Shrinkage cracking characteristics of concrete using ring specimens, ACI Mater J, 100, 239 Yoo, 2014, Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers, Compos Part B Eng, 58, 122, 10.1016/j.compositesb.2013.10.081 Japan Concrete Institute. Committee report. Autogenous shrinkage of concrete. In: Tazawa E, editor, E&FN Spon; 1999. p. 3–62. Hammer, 1998, Suggestions on the terminology and the test methods proposed by JCI. Autogenous Shrinkage of concrete, 397 Holt, 2001, Early age autogenous shrinkage of concrete, Tech Res Centre Finland: VTT Publicat, 446, 1 Darquennes, 2011, Determination of time-zero and its effect on autogenous deformation evolution, Eur J Environ Civil Eng, 15, 1017, 10.1080/19648189.2011.9695290 American Society for Testing and Materials (ASTM), 2009, ASTM C 1698 Standard test method for autogenous strain of cement paste and mortar Kazemi-Kamyab H, Denarié E, Brühwiler E. Very early age stiffness development of UHPFRC matrices in low temperatures. In: Proceedings 8th fib PhD symposium in Kgs, yngby, Denmark; 2010. Aïtcin, 1999, Demystifying autogenous shrinkage, Conc Int, 21, 54 American Society for Testing and Materials (ASTM), 2008, ASTM C 157/C 157M Standard test method for length change of hardened hydraulic-cement mortar and concrete Ahn MY, Evaluating setting and early age strength of Ultra-High Performance Concrete(UHPC) by Ultrasonic Pulse Velocity (UPV) method, Mater’s Thesis, Korea University, Seoul, Korea. Yoo, 2013, Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete, Constr Build Mater, 41, 427, 10.1016/j.conbuildmat.2012.12.015 Bentz, 2006, Influence of shrinkage-reducing admixtures on early-age properties of cement pastes, J Adv Concr Tech, 4, 423, 10.3151/jact.4.423 Yang, 2007, Use of high volume of fly ash to improve ECC mechanical properties of material greenness, ACI Mater J, 104, 620 Sant, 2011, The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures, Cem Concr Res, 41, 218, 10.1016/j.cemconres.2010.12.004 Hossain, 2006, The role of specimen geometry and boundary conditions on stress development and cracking in the restrained ring test, Cem Concr Res, 36, 189, 10.1016/j.cemconres.2004.06.043