Design and performance of low shrinkage UHPC for thin bonded bridge deck overlay

Wibowo, 2018

Krauss, 2009, Guidelines for selection of bridge deck overlays, sealers and treatments, NCHRP Proj, 7

Issa, 2007, Low-cycle fatigue testing of high-performance concrete bonded overlay–bridge deck slab systems, J. Bridge Eng., 12, 419, 10.1061/(ASCE)1084-0702(2007)12:4(419)

Meng, 2017, Optimization and performance of cost-effective ultra-high performance concrete, Mater. Struct. Constr., 50, 1, 10.1617/s11527-016-0896-3

Teng, 2020, Rheology control of ultra-high-performance concrete made with different fiber contents, Cement Concr. Res., 138, 106222, 10.1016/j.cemconres.2020.106222

Haber, 2018, Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing, Construct. Build. Mater., 190, 1056, 10.1016/j.conbuildmat.2018.09.167

Haber, 2017

De la Varga, 2015, Dimensional stability of grout-type materials used as connections between prefabricated concrete elements, J. Mater. Civ. Eng., 27, 10.1061/(ASCE)MT.1943-5533.0001212

Silfwerbrand, 2006, Bonded concrete overlays–bond strength issues, 19

Harris, 2011, Characterization of interface bond of ultra-high-performance concrete bridge deck overlays, Transp. Res. Rec. J. Transp. Res. Board., 2240, 40, 10.3141/2240-07

De la Varga, 2018, Enhancing shrinkage properties and bond performance of prefabricated bridge deck connection grouts: material and component testing, J. Mater. Civ. Eng., 30, 1, 10.1061/(ASCE)MT.1943-5533.0002235

Bao, 2017, Distributed fiber optic sensor-enhanced detection and prediction of shrinkage-induced delamination of ultra-high-performance concrete overlay, Smart Mater. Struct., 26, 10.1088/1361-665X/aa71f4

Lange, 2007, Early age stresses and debonding in bonded concrete overlays, Transp. Res. Rec. J. Transp. Res. Board., 1778, 174, 10.3141/1778-21

Zhu, 2020, Experimental study and theoretical prediction on shrinkage-induced restrained stresses in UHPC-RC composites under normal curing and steam curing, Cement Concr. Compos., 110, 103602, 10.1016/j.cemconcomp.2020.103602

Corinaldesi, 2015, The influence of expansive agent on the performance of fibre reinforced cement-based composites, Construct. Build. Mater., 91, 171, 10.1016/j.conbuildmat.2015.05.002

Chatterji, 1995, Mechanism of expansion of concrete due to the presence of dead-burnt CaO and MgO, Cement Concr. Res., 25, 51, 10.1016/0008-8846(94)00111-B

Shen, 2020, Investigation on expansion effect of the expansive agents in ultra-high performance concrete, Cement Concr. Compos., 105, 103425, 10.1016/j.cemconcomp.2019.103425

Liu, 2017, An overview on the effect of internal curing on shrinkage of high performance cement-based materials, Construct. Build. Mater., 146, 702, 10.1016/j.conbuildmat.2017.04.154

Jensen, 2002, Water-entrained cement-based materials, Cement Concr. Res., 31, 647, 10.1016/S0008-8846(01)00463-X

Meng, 2017, Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete, Cement Concr. Res., 101, 46, 10.1016/j.cemconres.2017.08.018

Valipour, 2018, Coupled effect of shrinkage-mitigating admixtures and saturated lightweight sand on shrinkage of UHPC for overlay applications, Construct. Build. Mater., 184, 320, 10.1016/j.conbuildmat.2018.06.191

Monosi, 2011, Effect of SRA on the expansive behaviour of mortars based on sulphoaluminate agent, Cement Concr. Compos., 33, 485, 10.1016/j.cemconcomp.2011.01.001

Collepardi, 2008, Crack-free concrete for outside industrial floors in the absence of wet curing and contraction joints, Cement Concr. Compos., 30, 887, 10.1016/j.cemconcomp.2008.07.002

Anshuang, 2017, Effects of shrinkage reducing agent and expansive admixture on the volume deformation of ultrahigh performance concrete, Ann. Mater. Sci. Eng., 6384859

Liu, 2019, Effects of pretreated fine lightweight aggregate on shrinkage and pore structure of ultra-high strength concrete, Construct. Build. Mater., 204, 276, 10.1016/j.conbuildmat.2019.01.205

Munoz, 2018

ICRI Committee 310, 2013, vol. 19

Meng, 2017, Improving flexural performance of ultra-high-performance concrete by Rheology control of suspending mortar, Compos. B Eng., 117, 26, 10.1016/j.compositesb.2017.02.019

Valipour, 2017

Valipour, 2020, Debonding test method to evaluate bond strength between UHPC and concrete substrate, Mater. Struct. Constr., 53, 1, 10.1617/s11527-020-1446-6

Graybeal, 2008, Cylinder or cube: strength testing of 80 to 200 MPa (11.6 to 29 ksi) ultra-high-performance fiber-reinforced concrete, ACI Mater. J., 105, 603

Graybeal, 2006

Meddah, 2011, Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete, Construct. Build. Mater., 25, 239, 10.1016/j.conbuildmat.2010.06.033

Wu, 2016, Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete, Construct. Build. Mater., 103, 8, 10.1016/j.conbuildmat.2015.11.028

Collepardi, 2005, Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions, Cement Concr. Compos., 27, 704, 10.1016/j.cemconcomp.2004.09.020

Mehdipour, 2018, Effect of shrinkage reducing admixture on early expansion and strength evolution of calcium sulfoaluminate blended cement, Cement Concr. Compos., 92, 82, 10.1016/j.cemconcomp.2018.06.002

Shin, 2004, Effects of shrinkage and temperature in bonded concrete overlays, ACI Mater. J., 101, 358

Wu, 2017, Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete, Cement Concr. Res., 95, 247, 10.1016/j.cemconres.2017.02.031

Wu, 2016, Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC), Cement Concr. Compos., 71, 97, 10.1016/j.cemconcomp.2016.05.005

Zhao, 2018, Pore structure characterization of early-age cement pastes blended with high-volume fly ash, Construct. Build. Mater., 189, 934, 10.1016/j.conbuildmat.2018.09.023

Shin, 2012, Effects of overlay thickness on surface cracking and debonding in bonded concrete overlays, Can. J. Civ. Eng., 39, 304, 10.1139/l2012-007

Bonaldo, 2005, Bond characterization between concrete substrate and repairing SFRC using pull-off testing, Int. J. Adhesion Adhes., 25, 463, 10.1016/j.ijadhadh.2005.01.002

Sritharan, 2018, First application of UHPC bridge deck overlay in North America, Transport. Res. Rec., 2672, 40, 10.1177/0361198118755665

Teng, 2020, Effect of welan gum and nanoclay on thixotropy of UHPC, Cement Concr. Res., 138, 106238, 10.1016/j.cemconres.2020.106238