Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete

De la Varga, 2015, Dimensional stability of grout-type materials used as connections between prefabricated concrete elements, ASCE J. Mater. Civ. Eng., 27, 127, 10.1061/(ASCE)MT.1943-5533.0001212

Meng, 2017, Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers, Compos. Part B, 107, 113, 10.1016/j.compositesb.2016.09.069

Justs, 2014, Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio, J. Therm. Anal. Calorim., 115, 425, 10.1007/s10973-013-3359-x

Bao, 2015, Measuring mortar shrinkage and cracking by pulse pre-pump Brillouin optical time domain analysis with a single optical fiber, Mater. Lett., 145, 344, 10.1016/j.matlet.2015.01.140

Bao, 2017, Distributed fiber optic sensor-enhanced detection and prediction of shrinkage-induced delamination of ultra-high-performance concrete bonded over an existing concrete substrate, Smart Mater. Struct., 26, 10.1088/1361-665X/aa71f4

Justs, 2015, Internal curing by superabsorbent polymers in ultra-high performance concrete, Cem. Concr. Res., 76, 82, 10.1016/j.cemconres.2015.05.005

Aïtcin, 2011

Al-Khaiat, 1998, Effect of initial curing on early strength and physical properties of a lightweight concrete, Cem. Concr. Res., 28, 859, 10.1016/S0008-8846(98)00051-9

Lura, 2004, On the origin of eigenstresses in lightweight aggregate concrete, Cem. Concr. Compos., 26, 445, 10.1016/S0958-9465(03)00072-6

Jensen, 2001, Water-entrained cement-based materials: I. Principles and theoretical background, Cem. Concr. Res., 31, 647, 10.1016/S0008-8846(01)00463-X

Bentz, 2011

Hwang, 2012, Effect of moist curing and use of lightweight sand on characteristics of high-performance concrete, ACI J. Mater. Struc., 46, 35, 10.1617/s11527-012-9881-7

Bentur, 2001, Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates, Cem. Concr. Res., 31, 1587, 10.1016/S0008-8846(01)00608-1

Henkensiefken, 2008

Zhutovsky, 2012, Effect of internal curing on durability-related properties of high performance concrete, Cem. Concr. Res., 42, 20, 10.1016/j.cemconres.2011.07.012

Bentz, 2005, Mixture proportioning for internal curing, Concr. Int., 27, 35

Beushausen, 2014, The use of superabsorbent polymers to reduce cracking of bonded mortar overlays, Cem. Concr. Compos., 52, 1, 10.1016/j.cemconcomp.2014.03.009

Mechtcherine, 2009, 31

Van, 2014, Rice husk ash as both pozzolanic admixture and internal curing agent in ultra-high performance concrete, Cem. Concr. Compos., 53, 270, 10.1016/j.cemconcomp.2014.07.015

Nguyen, 2011

Habeeb, 2009, Rice husk ash concrete: the effect of RHA average particle size on mechanical properties and drying shrinkage, Aust. J. Basic Appl. Sci., 3, 1616

Lura, 2014, Internal curing with lightweight aggregate produced from biomass-derived waste, Cem. Concr. Res., 59, 24, 10.1016/j.cemconres.2014.01.025

2016

Meng, 2017, Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar, Compos. Part B, 117, 26, 10.1016/j.compositesb.2017.02.019

Meng, 2017, Optimization and performance of cost-effective ultra-high performance concrete, Mater. Struct., 50, 29, 10.1617/s11527-016-0896-3

Bentz, 1999, Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate, Cem. Concr. Res., 29, 1863, 10.1016/S0008-8846(99)00178-7

Khayat, 2017, Economical and crack-free high-performance concrete for pavement and transportation infrastructure construction

EFNARC, 2002, Specification and guidelines for self-compacting concrete

Zhang, 2012, Study on optimization of hydration process of blended cement, J. Therm. Anal. Calorim., 107, 489, 10.1007/s10973-011-1531-8

Yu, 2014, Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC), Cem. Concr. Res., 28, 29, 10.1016/j.cemconres.2013.11.002

Mehta, 1986