Efficacy of internal curing combined with expansive agent in mitigating shrinkage deformation of concrete under variable temperature condition

Li, 2015, Deformation and cracking modeling for early-age sidewall concrete based on the multi-field coupling mechanism, Constr. Build. Mater., 88, 84, 10.1016/j.conbuildmat.2015.03.005 Baz ˇant, 1972, Nonlinear water diffusion in nonsaturated concrete, Mater. Struct., 5, 3 Ishida, 2007, Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history, Cem. Concr. Res., 4, 565, 10.1016/j.cemconres.2006.11.015 Carlson, 1940, Attempts to measure the cracking tendency of concrete, ACI J. Proc., 36, 533 Younis, 2016, Assessment of post-restrained shrinkage mechanical properties of concrete, ACI Mater. J., 113, 267 Bentz, 1999, Effect of cement particle size distribution on performance properties of Portland cement-based materials, Cem. Concr. Res., 29, 1663, 10.1016/S0008-8846(99)00163-5 Liu, 2012, Investigation on the plastic shrinkage of cementitious materials under drying conditions: mechanism and theoretical model, Mag. Concr. Res., 64, 1 Xu, 2014, Influences of Retarders on effectiveness of Calcium oxide expansion agent, J. Chin. Ceram. Soc., 42, 184 Li, 2014, Hydration kinetics and microscopic analysis of calcium oxide expansion clinker, Concrete, 3, 75 Liu, 2014, Hydration kinetics of CaO expansion Clinker, J. Build. Mater., 17, 15, 10.1016/j.conbuildmat.2014.09.016 Bentz, 1999, Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate, Cem. Concr. Res., 29, 1863, 10.1016/S0008-8846(99)00178-7 Henkensiefken, 2009, Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions, Cem. Concr. Compos., 31, 427, 10.1016/j.cemconcomp.2009.04.003 Henkensiefken, 2009, Water absorption in internally cured mortar made with water-filled lightweight aggregate, Cem. Concr. Res., 39, 883, 10.1016/j.cemconres.2009.06.009 Golias, 2012, The influence of the initial moisture content of lightweight aggregate on internal curing, Constr. Build. Mater., 35, 52, 10.1016/j.conbuildmat.2012.02.074 Bentz, 1999, Protected paste volume in concrete extension to internal curing using saturated lightweight fine aggregate, Cem. Concr. Res., 29, 1863, 10.1016/S0008-8846(99)00178-7 Jensen, 2001, Water-entrained cement-based materials: I. Principles and theoretical background, Cem. Concr. Res., 31, 647, 10.1016/S0008-8846(01)00463-X Jensen, 2002, Water-entrained cement-based materials: II. Experimental observations, Cem. Concr. Res., 32, 973, 10.1016/S0008-8846(02)00737-8 Justs, 2015, Internal curing by superabsorbent polymers in ultra-high performance concrete, Cem. Concr. Res., 76, 82, 10.1016/j.cemconres.2015.05.005 Wyrzykowski, 2013, Moisture dependence of thermal expansion in cement-based materials at early ages, Cem. Concr. Res., 53, 25, 10.1016/j.cemconres.2013.05.016 Wyrzykowski, 2013, Controlling the coefficient of thermal expansion of cementitious materials–a new application for superabsorbent polymers, Cem. Concr. Compos., 35, 49, 10.1016/j.cemconcomp.2012.08.010 Zhutovsky, 2002, Efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage, Mater. Struct., 35, 97, 10.1617/13801 Castro, 2012, Water absorption and electrical conductivity for internally cured mortars with a W/C between 0.30 and 0.45, ASCE. J. Mater. Civ. Eng., 24, 223, 10.1061/(ASCE)MT.1943-5533.0000377 Browning, 2011, Lightweight aggregate as internal curing agent to limit concrete shrinkage, ACI Mater. J., 108, 638 Qin, 2011, Research on performance improvement of expansive concrete with internal curing agent SAP and its action mechanism, J. Build. Mater., 14, 394 Zhu, 2015, Cracking resistance of internal curing shrinkage compensating concrete, J. Build. Mater., 18 Chen, 2016, Influence of internal curing and expansive agent on concrete complex crack resistance, J. Chin. Ceram. Soc., 44, 189 Chen, 2013, Effects of expansive agent and shale pottery on shrinkage reduction of lower water-cement ratio mortar, J. Chin. Ceram. Soc., 41, 505 Nie, 2016, Internal curing – a suitable method for improving the performance of heat-cured concrete, Constr. Build. Mater., 122, 294, 10.1016/j.conbuildmat.2016.05.159 Atiş, 2002, Heat evolution of high-volume fly ash concrete, Cem. Concr. Res., 32, 751, 10.1016/S0008-8846(01)00755-4 Lam, 2000, Degree of hydration and gel/space ratio of high-volume fly ash/cement systems, Cem. Concr. Res., 30, 747, 10.1016/S0008-8846(00)00213-1 Langan, 2002, Effect of silica fume and fly ash on heat of hydration of Portland cement, Cem. Concr. Res., 32, 1045, 10.1016/S0008-8846(02)00742-1 Lura, 2001, Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete, Cem. Concr. Res., 31, 1867, 10.1016/S0008-8846(01)00601-9 Lee, 2006, Autogenous shrinkage of concrete containing granulated blast-furnace slag, Cem. Concr. Res., 36, 1279, 10.1016/j.cemconres.2006.01.005 Ghafari, 2016, Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete, Constr. Build. Mater., 127, 43, 10.1016/j.conbuildmat.2016.09.123 Altoubat, 2016, Restrained shrinkage behavior of Self-Compacting Concrete containing ground-granulated blast-furnace slag, Constr. Build. Mater., 129, 98, 10.1016/j.conbuildmat.2016.10.115 Jiang, 2014, Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures, Constr. Build. Mater., 61, 260, 10.1016/j.conbuildmat.2014.03.023 Castro, 2011, Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures, Cem. Concr. Compos., 33, 1001, 10.1016/j.cemconcomp.2011.07.006 Bentz, 2005, Mixture proportioning for internal curing, Concr. Int., 27, 35 Tian, 2005, Study on the measurement of autogenous shrinkage of high performance concrete, J. Build. Mater., 8, 82 Q. Tian, Y.J. Wang, H. Zhang, et al., In-situ monitoring of setting of concrete based on pore water pressure measurement, in: Second International Conference on Microstructural-related Durability of Cementitious Composites, Amsterdam, the Netherlands, 2012. US Department of Commerce. NISTIR 6265, 1999 Lu, 1992, Nearest-surface distribution functions for polydispersed particle systems, Phys. Rev. A, 45, 5530, 10.1103/PhysRevA.45.5530 Lura, 2006, Measurement of water transport from saturated pumice aggregates to hardening cement paste, Mater. Struct., 39, 861, 10.1617/s11527-006-9137-5 Trtik, 2011, Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography, Nucl. Instrum. Methods Phys. Res., Sect. A, 651, 244, 10.1016/j.nima.2011.02.012 Lura, 2014, Internal curing with lightweight aggregate produced from biomass-derived waste, Cem. Concr. Res., 59, 24, 10.1016/j.cemconres.2014.01.025 Wyrzykowski, 2012, Modeling of water release from superabsorbent polymers during internal curing, ASCE J. Mater. Civ. Eng., 24, 1006, 10.1061/(ASCE)MT.1943-5533.0000448 Henkensiefken, 2011, Saturated lightweight aggregate for internal curing in low w/c mixtures: monitoring water movement using X-ray absorption, Strain, 47, 432, 10.1111/j.1475-1305.2009.00626.x De la Varga, 2012, Application of internal curing for mixtures containing high volumes of fly ash, Cem. Concr. Compos., 34, 1001, 10.1016/j.cemconcomp.2012.06.008 Golias, 2013, Influence of exposure conditions on the efficiency of internal curing in concrete, Adv. Civ. Eng. Mater., 2, 522 Moon, 2006