Effect of calcium sulfoaluminate-based expansive agent on rate dependent pullout behavior of straight steel fiber embedded in UHPC

AFGC, 2013, Ultra high performance fibre-reinforced concretes

ACI Committee 239, 2012

JSCE, 2004

KCI-M-12-003, 2012

Richard, 1995, Composition of reactive powder concretes, Cem. Concr. Res., 25, 1501, 10.1016/0008-8846(95)00144-2

Yoo, 2016, A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete, Int. J. Concr. Struct. Mater., 10, 125, 10.1007/s40069-016-0143-x

Yoo, 2014, Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age, Constr. Build. Mater., 73, 357, 10.1016/j.conbuildmat.2014.09.097

Koh, 2011, Shrinkage properties of ultra-high performance concrete (UHPC), Adv. Sci. Lett., 4, 948, 10.1166/asl.2011.1505

Yoo, 2015, Effectiveness of shrinkage-reducing admixture in reducing autogenous shrinkage stress of ultra-high-performance fiber-reinforced concrete, Cem. Concr. Compos., 64, 27, 10.1016/j.cemconcomp.2015.09.005

Tazawa, 2000, Work of JCI committee on autogenous shrinkage, 21

Soliman, 2011, Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age, Mater. Struct., 44, 879, 10.1617/s11527-010-9670-0

Ma, 2004, Comparative investigations on ultra-high performance concrete with and without coarse aggregates, 205

Park, 2014, Benefits of using expansive and shrinkage-reducing agents in UHPC for volume stability, Mag. Concr. Res., 66, 745, 10.1680/macr.13.00317

Dudziak, 2008, Mitigation of volume changes of ultra-high performance concrete (UHPC) by using super absorbent polymers, 425

Orgass, 2004, Fibre reinforced ultra-high strength concretes, 637

Collepardi, 1997, Mechanical properties of modified reactive powder concrete, ACI Spec. Publ., 173, 1

Yoo, 2013, Effect of shrinkage reducing admixture on tensile and flexural behaviors of UHPFRC considering fiber distribution characteristics, Cem. Concr. Res., 54, 180, 10.1016/j.cemconres.2013.09.006

Corinaldesi, 2015, The influence of expansive agent on the performance of fibre reinforced cement-based composites, Constr. Build. Mater., 91, 171, 10.1016/j.conbuildmat.2015.05.002

ASTM C1437, 2013, 1

Nagataki, 1998, Expansive admixtures (mainly ettringite), Cem. Concr. Compos., 20, 163, 10.1016/S0958-9465(97)00064-4

Monosi, 2011, Effect of SRA on the expansive behaviour of mortars based on sulphoaluminate agent, Cem. Concr. Compos., 33, 485, 10.1016/j.cemconcomp.2011.01.001

ASTM C109/C109M-16a, 2016, 1

Aïtcin, 1999, Demystifying autogenous shrinkage, Concr. Int., 21, 54

Yoo, 2018, Effects of mix proportion and curing condition on shrinkage behavior of HPFRCCs with silica fume and blast furnace slag, Constr. Build. Mater., 166, 241, 10.1016/j.conbuildmat.2018.01.126

Lee, 2010, Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix, Constr. Build. Mater., 24, 2030, 10.1016/j.conbuildmat.2010.03.009

Yoo, 2014, Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC, Constr. Build. Mater., 64, 67, 10.1016/j.conbuildmat.2014.04.007

Hargis, 2014, Calcium sulfoaluminate (Ye'elimite) hydration in the presence of gypsum, calcite, and vaterite, Cem. Concr. Res., 65, 15, 10.1016/j.cemconres.2014.07.004

Glasser, 2001, High-performance cement matrices based on calcium sulfoaluminate–belite compositions, Cem. Concr. Res., 31, 1881, 10.1016/S0008-8846(01)00649-4

Lee, 2016, Characterizations of high early-strength type shrinkage reducing cement and calcium sulfo-aluminate by using industrial wastes, J. Korean Ceram. Soc., 53, 215, 10.4191/kcers.2016.53.2.215

Lee, 2018, Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete, Constr. Build. Mater., 185, 530, 10.1016/j.conbuildmat.2018.07.071

Song, 2004, Mechanical properties of high-strength steel fiber-reinforced concrete, Constr. Build. Mater., 18, 669, 10.1016/j.conbuildmat.2004.04.027

Japan Concrete Institute, 1999, 3

Darquennes, 2011, Determination of time-zero and its effect on autogenous deformation evolution, Eur. J. Environ. Civ. Eng., 15, 1017, 10.1080/19648189.2011.9695290

ASTM C1698-09, 2014, 1

Yoo, 2015, Enhancing cracking resistance of ultra-high-performance concrete slabs using steel fibres, Mag. Concr. Res., 67, 487, 10.1680/macr.14.00116

Hicks, 2015, Opportunities from alternative cementitious materials, Concr. Int., 37, 47

Fourmentin, 2018, 28

Zhang, 2018, Effect of addition rate of expansive additive on autogenous shrinkage and delayed expansion of ultra-high strength mortar, J. Adv. Concr. Technol., 16, 250, 10.3151/jact.16.250

Graybeal, 2006

Kim, 2010, Effect of matrix strength on pullout behavior of high-strength deformed steel fibers, ACI Spec. Publ., 272, 135

Naaman, 1991, Fiber pullout and bond slip. I: analytical study, J. Struct. Eng., 117, 2769, 10.1061/(ASCE)0733-9445(1991)117:9(2769)

Yoo, 2016, Size effect in ultra-high-performance concrete beams, Eng. Fract. Mech., 157, 86, 10.1016/j.engfracmech.2016.02.009

Wille, 2013, Effect of ultra-high-performance concrete on pullout behavior of high-strength brass-coated straight steel fibers, ACI Mater. J., 110, 451

Yoo, 2017, Fiber pullout behavior of HPFRCC: effects of matrix strength and fiber type, Compos. Struct., 174, 263, 10.1016/j.compstruct.2017.04.064

Yoo, 2019, Comparative pullout behavior of half-hooked and commercial steel fibers embedded in UHPC under static and impact loads, Cem. Concr. Compos., 97, 89, 10.1016/j.cemconcomp.2018.12.023

Ross, 1997, Review of strain-rate effects in materials, 255

Bindiganavile, 2005, Generating dynamic crack growth resistance curves for fiber-reinforced concrete, Exp. Mech., 45, 112, 10.1007/BF02428183

Mindess, 2003

Fujikake, 2006, Effects of strain rate on tensile behavior of reactive powder concrete, J. Adv. Concr. Technol., 4, 79, 10.3151/jact.4.79

JSCE, 1993, Impact behavior and design of structures, Structural Engineering Series, 6

Jewell, 2015, 1

Yoo, 2017, Nonlinear finite element analysis of ultra-high-performance fiber-reinforced concrete beams, Int. J. Damage Mech., 26, 735, 10.1177/1056789515612559

Yoo, 2019, Effect of fiber spacing on dynamic pullout behavior of multiple straight steel fibers in ultra-high-performance concrete, Constr. Build. Mater., 210, 461, 10.1016/j.conbuildmat.2019.03.171

Li, 1990, Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix, Compos, 21, 132, 10.1016/0010-4361(90)90005-H