Solving shrinkage problem of ultra-high-performance concrete by a combined use of expansive agent, super absorbent polymer, and shrinkage-reducing agent
Tóm tắt
Từ khóa
Tài liệu tham khảo
Richard, 1994, Reactive powder concretes with high ductility and 200−800 MPa compressive strength, ACI Mater J, 144, 507‒518
Ren, 2018, Design and behavior of super-long span cable-stayed bridge with CFRP cables and UHPC members, Compos B Eng, 164, 72, 10.1016/j.compositesb.2018.11.060
Graybeal, 2007, Compressive behavior of ultra-high-performance fiber-reinforced concrete, ACI Mater J, 104, 146
Cao, 2019, Enhancing flexural performance of ultra-high performance concrete by an optimized layered-structure concept, Compos B Eng, 171, 154, 10.1016/j.compositesb.2019.04.021
Roux, 1996, Experimental study of durability of reactive powder concretes, J Mater Civ Eng, 8, 1, 10.1061/(ASCE)0899-1561(1996)8:1(1)
Richard, 1995, Composition of reactive powder concrete, Cement Concr Res, 25, 1501, 10.1016/0008-8846(95)00144-2
Tazawa, 1995, Influence of cement and admixture on autogenous shrinkage of cement paste, Cement Concr Res, 25, 281, 10.1016/0008-8846(95)00010-0
Li, 2017, Early-age shrinkage development of ultra-high-performance concrete under heat curing treatment, Construct Build Mater, 131, 767, 10.1016/j.conbuildmat.2016.11.024
Tazawa, 1995, Experimental study on mechanism of autogenous shrinkage of concrete, Cement Concr Res, 25, 1633, 10.1016/0008-8846(95)00159-X
Graybeal, 2012
He, 2018, Experimental evaluation of shear connectors using reactive powder concrete under natural curing condition, Construct Build Mater, 191, 775, 10.1016/j.conbuildmat.2018.10.063
Yang, 2019, Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete - a review, Compos B Eng, 178, 107456, 10.1016/j.compositesb.2019.107456
Wu, 2019, Investigation of mechanical properties and shrinkage of ultra-high performance concrete_ Influence of steel fiber content and shape, Compos B Eng, 174, 107021, 10.1016/j.compositesb.2019.107021
Li, 2020, Functionally graded ultra-high performance cementitious composite with enhanced impact properties, Compos B Eng, 183, 107680, 10.1016/j.compositesb.2019.107680
Cao, 2020, Enhancing the low-velocity impact resistance of Ultra-High Performance Concrete by an optimized layered-structure concept, Compos B Eng, 200, 108221, 10.1016/j.compositesb.2020.108221
Guo, 2020, Design of pH-responsive SAP polymer for pore solution chemistry regulation and crack sealing in cementitious materials, Compos B Eng, 199, 108262, 10.1016/j.compositesb.2020.108262
Justs, 2015, Internal curing by superabsorbent polymers in ultra-high performance concrete, Cement Concr Res, 76, 82, 10.1016/j.cemconres.2015.05.005
Park, 2014, Benefits of using expansive and shrinkage-reducing agents in UHPC for volume stability, Mag Concr Res, 66, 745, 10.1680/macr.13.00317
Qin, 2020, Effect of shrinkage reducing admixture on new-to-old concrete interface, Compos B Eng, 167, 346, 10.1016/j.compositesb.2018.11.087
Collepardi, 2008, Crack-free concrete for outside industrial floors in the absence of wet curing and contraction joints, Cement Concr Compos, 30, 887, 10.1016/j.cemconcomp.2008.07.002
Meddah, 2011, Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete, Construct Build Mater, 25, 239, 10.1016/j.conbuildmat.2010.06.033
Nagataki, 1998, Expansive admixtures (mainly ettringite), Cement Concr Compos, 20, 163, 10.1016/S0958-9465(97)00064-4
ACI Committee 223, 2010, 16p
Metha, 1973, Mechanism of expansion associated with ettringite formation, Cement Concr Res, 3, 1, 10.1016/0008-8846(73)90056-2
Cohen, 1983, Theories of expansion in sulfoaluminate - type expansive cements: schools of thought, Cement Concr Res, 13, 809, 10.1016/0008-8846(83)90082-0
Shen, 2020, Investigation on expansion effect of the expansive agents in ultra-high performance concrete, Cement Concr Compos, 105, 103425, 10.1016/j.cemconcomp.2019.103425
Yoo, 2019, Dynamic pullout behavior of half-hooked and twisted steel fibers in ultra-high-performance concrete containing expansive agents, Compos B Eng, 167, 517, 10.1016/j.compositesb.2019.03.022
Yan, 2001, The effect of expansive agent and possibility of delayed ettringite formation in shrinkage-compensating massive concrete, Cement Concr Res, 31, 335, 10.1016/S0008-8846(00)00453-1
GB23439-2017, 2017
Bentz, 2004, Mitigation strategies for autogenous shrinkage cracking, Cem. Concr, Composer, 26, 677
Jensen, 2002, Water-entrained cement-based materials: II. Experimental observations, Cem, Concr. Res., 32, 973, 10.1016/S0008-8846(02)00737-8
GB/T50082-2009, 2009
Xie, 2018, Characterizations of autogenous and drying shrinkage of ultra-high performance concrete (UHPC): an experimental study, Cement Concr Compos, 91, 156, 10.1016/j.cemconcomp.2018.05.009
Liu, 2019, Effects of superabsorbent polymer on shrinkage properties of ultra-high strength concrete under drying condition, Construct Build Mater, 215, 799, 10.1016/j.conbuildmat.2019.04.237
GB/T50080-2016, 2016
Wang, 2011, Determination of the content of free calcium oxide in steel slag by the glycol-TG method, J Beijing Univ Chem Technol (Nat Sci Ed), 38, 17
GB/T176-2017, 2017
Javellana, 1982, Extraction of free lime in Portland cement and clinker by ethylene glycol, Cement Concr Res, 12, 399, 10.1016/0008-8846(82)90088-6
Su, 2017, Effects of shrinkage reducing agent and expansive admixture on the volume deformation of ultrahigh performance concrete, Ann Mater Sci Eng, 1
W Taylor, 2001, Delayed ettringite formation, Cement Concr Res, 31, 683, 10.1016/S0008-8846(01)00466-5
Brunetaud, 2008, Impact of unrestrained Delayed Ettringite Formation-induced expansion on concrete mechanical properties, Cem, Concr. Res., 38, 1343, 10.1016/j.cemconres.2008.05.005
Diamond, 1996, Delayed ettringite formation—processes and problems, Cement Concr Compos, 18, 205, 10.1016/0958-9465(96)00017-0
Soliman, 2014, Effects of shrinkage reducing admixture and wollastonite microfiber on early-age behavior of ultra-high performance concrete, Cement Concr Compos, 46, 81, 10.1016/j.cemconcomp.2013.11.008
Yoo, 2015, Effectiveness of shrinkage-reducing admixture in reducing autogenous shrinkage stress of ultra-high-performance fiber-reinforced concrete, Cement Concr Compos, 64, 27, 10.1016/j.cemconcomp.2015.09.005
Corinaldesi, 2012, Combined effect of expansive, shrinkage reducing and hydrophobic admixtures for durable self compacting concrete, Construct Build Mater, 36, 758, 10.1016/j.conbuildmat.2012.04.129
Corinaldesi, 2015, The influence of expansive agent on the performance of fibre reinforced cement-based composites, Construct Build Mater, 91, 171, 10.1016/j.conbuildmat.2015.05.002
Maltese, 2005, Combined effect of expansive and shrinkage reducing admixtures to obtain stable and durable mortars, Cement Concr Res, 35, 2244, 10.1016/j.cemconres.2004.11.021
Tazawa, 1999
Collepardi, 2005, Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions, Cement Concr Compos, 27, 704, 10.1016/j.cemconcomp.2004.09.020
Chatterji, 1995, Mechanism of expansion of concrete due to the presence of dead-burnt CaO and MgO, Cement Concr Res, 25, 51, 10.1016/0008-8846(94)00111-B
Tam, 2016, Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong, Construct Build Mater, 26, 79, 10.1016/j.conbuildmat.2011.05.006
Bella, 2017, Evaluation of the ultimate drying shrinkage of cement-based mortars with poroelastic models, Mater Struct, 50, 52, 10.1617/s11527-016-0870-0
Kang, 2018, The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete, Construct Build Mater, 172, 29, 10.1016/j.conbuildmat.2018.03.193
Bentz, 2001, Shrinkage-reducing admixtures and early-age desiccation in cement pastes and mortars, Cement Concr Res, 31, 1075, 10.1016/S0008-8846(01)00519-1
He, 2018, Experimental study on CFSC encased shear connectors in steel-concrete composite joints with UHPC grout, Construct Build Mater, 173, 638, 10.1016/j.conbuildmat.2018.04.086
GB/T31387-2015, 2015
