An Interlayer with Strong Pb-Cl Bond Delivers Ultraviolet-Filter-Free, Efficient, and Photostable Perovskite Solar Cells

Adinolfi, 2016, The in-gap electronic state spectrum of methylammonium lead iodide single-crystal perovskites, Adv. Mater., 28, 3406, 10.1002/adma.201505162

Aristidou, 2015, The role of oxygen in the degradation of methylammonium lead trihalide perovskite photoactive layers, Angew. Chem. Int. Ed., 54, 8208, 10.1002/anie.201503153

Baena, 2015, Highly efficient planar perovskite solar cells through band alignment engineering, Energy Environ. Sci., 8, 2928, 10.1039/C5EE02608C

Bai, 2019, Planar perovskite solar cells with long-term stability using ionic liquid additives, Nature, 571, 245, 10.1038/s41586-019-1357-2

Bella, 2016, Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers, Science, 354, 203, 10.1126/science.aah4046

Bi, 2016, Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%, Nat. Energy, 1, 16142, 10.1038/nenergy.2016.142

Hiratsuka, 1990, Formation of SnO2 gels from dispersed sols in aqueous colloidal solutions, J. Non-Cryst. Solids, 121, 76, 10.1016/0022-3093(90)90109-Y

Ito, 2014, Effects of surface blocking layer of Sb2S3 on nanocrystalline TiO2 for CH3NH3PbI3 perovskite solar cells, J. Phys. Chem. C, 118, 16995, 10.1021/jp500449z

Jacobsson, 2016, Unreacted PbI2 as a double-edged sword for enhancing the performance of perovskite solar cells, J. Am. Chem. Soc., 138, 10331, 10.1021/jacs.6b06320

Jeon, 2018, A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells, Nat. Energy, 3, 682, 10.1038/s41560-018-0200-6

Jiang, 2017, Planar-structure perovskite solar cells with efficiency beyond 21%, Adv. Mater., 29, 1703852, 10.1002/adma.201703852

Jiang, 2017, Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)(2)PbI3-based perovskite solar cells, Nat. Energy, 2, 1, 10.1038/nenergy.2016.177

Jiang, 2019, Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation, Nat. Energy, 1, 585, 10.1038/s41560-019-0406-2

Jin, 2015, Synthesis of hierarchical SnO2 nanoflowers and their high gas-sensing properties, Mater. Lett., 143, 283, 10.1016/j.matlet.2014.12.137

Jo, 2016, High performance of planar perovskite solar cells produced from PbI2 (DMSO) and PbI2 (NMP) complexes by intramolecular exchange, Adv. Mater. Interfaces, 3, 1500768, 10.1002/admi.201500768

Jung, 2019, Efficient, stable and scalable perovskite solar cells using poly (3-hexylthiophene), Nature, 567, 511, 10.1038/s41586-019-1036-3

Kim, 2012, Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%, Sci. Rep., 2, 591, 10.1038/srep00591

Kojima, 2009, Organometal Halide Perovskites as visible-light sensitizers for photovoltaic cells, J. Am. Chem. Soc., 131, 6050, 10.1021/ja809598r

Lee, 2012, Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites, Science, 338, 643, 10.1126/science.1228604

Leijtens, 2013, Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells, Nat. Commun., 4, 2885, 10.1038/ncomms3885

Li, 2016, Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification, Energy Environ. Sci., 9, 490, 10.1039/C5EE03522H

Li, 2018, In-situ cross-linking strategy for efficient and operationally stable methylammoniun lead iodide solar cells, Nat. Commun., 9, 3806, 10.1038/s41467-018-06204-2

Lira-Cantú, 2017, Perovskite solar cells: stability lies at interfaces, Nat. Energy, 2, 17115, 10.1038/nenergy.2017.115

Liu, 2019, Coagulated SnO2 colloids for high-performance planar perovskite solar cells with negligible hysteresis and improved stability, Angew. Chem., 131, 11621, 10.1002/ange.201904945

Luo, 2017, Discrete iron(III) oxide nanoislands for efficient and photostable perovskite solar cells, Adv. Funct. Mater., 27, 1702090, 10.1002/adfm.201702090

Lupan, 2009, A rapid hydrothermal synthesis of rutile SnO2 nanowires, Mater. Sci. Eng. B Adv., 157, 101, 10.1016/j.mseb.2008.12.035

Matsui, 2017, Room-temperature formation of highly crystalline multication perovskites for efficient, low-cost solar cells, Adv. Mater., 29, 1606258, 10.1002/adma.201606258

Misra, 2015, Temperature- and component-dependent degradation of perovskite photovoltaic materials under concentrated sunlight, J. Phys. Chem. Lett., 6, 326, 10.1021/jz502642b

Pearson, 2016, Oxygen degradation in mesoporous Al2O3/CH3NH3PbI3-xClx perovskite solar cells: kinetics and mechanisms, Adv. Energy Mater., 6, 1600014, 10.1002/aenm.201600014

Raga, 2015, Influence of air annealing on high efficiency planar structure perovskite solar cells, Chem. Mater., 27, 1597, 10.1021/cm5041997

Roose, 2016, Mesoporous SnO2 electron selective contact enables UV-stable perovskite solar cells, Nano Energy, 30, 517, 10.1016/j.nanoen.2016.10.055

Rubi, 2003, Mesoscopic nonequilibrium thermodynamics gives the same thermodynamic basis to Butler−Volmer and Nernst equations, J. Phys. Chem. B, 107, 13471, 10.1021/jp030572g

Shi, 2019, Regulation of interfacial charge transfer and recombination for efficient planar perovskite solar cells, Sol. RRL, 1900198, 10.1002/solr.201900198

Shin, 2017, Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells, Science, 356, 167, 10.1126/science.aam6620

Si, 2017, Deciphering the NH4PbI3 intermediate phase for simultaneous improvement on nucleation and crystal growth of perovskite, Adv. Funct. Mater., 27, 1701864, 10.1002/adfm.201701804

Tan, 2017, Efficient and stable solution-processed planar perovskite solar cells via contact passivation, Science, 355, 722, 10.1126/science.aai9081

Turren-Cruz, 2018, Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture, Science, 362, 449, 10.1126/science.aat3583

Wang, 2017, Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour, Nat. Energy, 2, 16195, 10.1038/nenergy.2016.195

Wang, 2017, Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites, Nat. Energy, 2, 17135, 10.1038/nenergy.2017.135

Wang, 2017, Efficient and air-stable mixed-cation lead mixed-halide perovskite solar cells with n-doped organic electron extraction layers, Adv. Mater., 29, 1604186, 10.1002/adma.201604186

Wang, 2017, Energy-down-shift CsPbCl3:Mn quantum dots for boosting the efficiency and stability of perovskite solar cells, ACS Energy Lett., 2, 1479, 10.1021/acsenergylett.7b00375

Wang, 2019, A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells, Science, 363, 265, 10.1126/science.aau5701

Xie, 2016, Improved performance and air stability of planar perovskite solar cells via interfacial engineering using a fullerene amine interlayer, Nano Energy, 28, 330, 10.1016/j.nanoen.2016.08.048

Xie, 2017, Enhanced electronic properties of SnO2 via electron transfer from graphene quantum dots for efficient perovskite solar cells, ACS Nano, 11, 9176, 10.1021/acsnano.7b04070

Yang, 2017, Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells, Science, 356, 1376, 10.1126/science.aan2301

Zhang, 2016, A controllable fabrication of grain boundary PbI2 nanoplates passivated lead halide perovskites for high performance solar cells, Nano Energy, 26, 50, 10.1016/j.nanoen.2016.05.003

Zhang, 2016, Enhanced performance and light soaking stability of planar perovskite solar cells using an amine-based fullerene interfacial modifier, J. Mater. Chem. A, 4, 18509, 10.1039/C6TA08992E

Zhang, 2018, Synergistic effect of anions and cations in additives for highly efficient and stable perovskite solar cells, J. Mater. Chem. A, 6, 9264, 10.1039/C8TA00308D

Zhao, 2016, A polymer scaffold for self-healing perovskite solar cells, Nat. Commun., 7, 10228, 10.1038/ncomms10228

Zhao, 2019, Double-side-passivated perovskite solar cells with ultra-low potential loss, Sol. RRL, 3, 1800296, 10.1002/solr.201800296

Zhou, 2014, Interface engineering of highly efficient perovskite solar cells, Science, 345, 542, 10.1126/science.1254050