Opto-Electronics Review

In the present paper, ZnO nanoparticles (NPs) with particle size of 20–50 nm have been synthesized by hydrothermal method. UV-visible absorption spectra of ZnO nanoparticles show absorption edge at 372 nm, which is blue-shifted as compared to bulk ZnO. Photoluminescence (PL) and photoconductive device characteristics, including field response, light intensity response, rise and decay time response, and spectral response have been studied systematically. The photoluminescence spectra of these ZnO nanoparticles exhibited different emission peaks at 396 nm, 416 nm, 445 nm, 481 nm, and 524 nm. The photoconductivity spectra of ZnO nanoparticles are studied in the UV-visible spectral region (366–691 nm). In spectral response curve of ZnO NPs, the wavelength dependence of the photocurrent is very close to the absorption and photoluminescence spectra. The photo generated current, Ipc = (Itotal - Idark) and dark current Idc varies according to the power law with the applied field IpcαVr and with the intensity of illumination IpcαIL r, due to the defect related mechanism including both recombination centers and traps. The ZnO NPs is found to have deep trap of 0.96 eV, very close to green band emission. The photo and dark conductivities of ZnO NPs have been measured using thick film of powder without any binder.

The great progress in high-peak-power laser technology has resulted recently in the production of ps and subps laser pulses of PW powers and relativistic intensities (up to 1021 W/cm2) and has laid the basis for the construction of multi-PW lasers generating ultrarelativistic laser intensities (above 1023 W/cm2). The laser pulses of such extreme parameters make it possible to produce highly collimated beams of electrons or ions of MeV to GeV energies, of short time durations (down to subps) and of enormous currents and current densities, unattainable with conventional accelerators. Such particle beams have a potential to be applied in numerous fields of scientific research as well as in medicine and technology development. This paper is focused on laser-driven generation of fast ion beams and reviews recent progress in this field. The basic concepts and achievements in the generation of intense beams of protons, light ions, and multiply charged heavy ions are presented. Prospects for applications of laser-driven ion beams are briefly discussed.

Uncooled infrared focal plane arrays are being developed for a wide range of thermal imaging applications. Fire-fighting, predictive maintenance, process control and thermography are a few of the industrial applications which could take benefit from uncooled infrared detector. Therefore, to answer these markets, a 35-μm pixel-pitch uncooled IR detector technology has been developed enabling high performance 160×120 and 384×288 arrays production. Besides a wide-band version from uncooled 320×240/45 μm array has been also developed in order to address process control and more precisely industrial furnaces control. The ULIS amorphous silicon technology is well adapted to manufacture low cost detector in mass production. After some brief microbolometer technological background, we present the characterization of 35 μm pixel-pitch detector as well as the wide-band 320×240 infrared focal plane arrays with a pixel pitch of 45 μm.

Hitherto, two families of multielement infrared (IR) detectors are used for principal military and civilian infrared applications; one is used for scanning systems (first generation) and the other is used for staring systems (second generation). Third generation systems are being developed nowadays. In the common understanding, third generation IR systems provide enhanced capabilities like larger number of pixels, higher frame rates, better thermal resolution as well as multicolour functionality and other on-chip functions.

In the paper, issues associated with the development and exploitation of materials used in fabrication of third generation infrared photon detectors are discussed. In this class of detectors two main competitors, HgCdTe photodiodes and quantum well IR photoconductors (QWIPs) are considered. The performance figures of merit of state-of-the-art HgCdTe and QWIP focal plane arrays (FPAs) are similar because the main limitations come from the readout circuits. However, the metallurgical issues of the epitaxial layers such as uniformity and number of defected elements are the serious problems in the case of long wavelength infrared (LWIR) and very LWIR (VLWIR) HgCdTe FPAs. It is predicted that superlattice based InAs/GaInSb system grown on GaSb substrate seems to be an attractive to HgCdTe with good spatial uniformity and an ability to span cutoff wavelength from 3 to 25 μm.

This study presents the electromagnetic wave propagation through the frequency-dispersive and lossy double-negative slab embedded between two different semi-infinite media. The double-negative slab is realized by using two models, the Lorentz and Drude medium models. The properties and the required equations for the frequency-dispersive and lossy double-negative slab, the Lorentz medium and Drude medium are given in detail. After the construction of the problem, the reflection and transmission coefficients are derived for both TE and TM waves. Then, the reflected, transmitted and loss powers are determined using these coefficients. Finally, in the numerical results, the mentioned powers for TE and TM waves are computed and illustrated as a function of the incidence angle, the frequency and the slab thickness when the damping frequency changes.

The paper reports on the first experimental results of the mid-wave infrared (MWIR) HgCdTe barrier detectors operated at near-room temperatures and fabricated using metal organic chemical vapor deposition (MOCVD). SIMS profiles let to compare projected and obtained structures and reveals interdiffusion processes between the layers. Undesirable iodine diffusion from cap to the barrier increase the valance band offset and is the key item in limiting the performance of HgCdTe nBn detector. However, MOCVD technology with a wide range of composition and donor/acceptor doping and without post grown annealing might be successfully adopted for barrier device architectures.

The paper presents the results of theoretical analysis as well as the results of experimental research involving planar sensor structures with input grating couplers of the period Λ = 800 nm. In the theoretical part of the paper we discussed the influence of the parameters of a sensor structure on it sensitivities. The experimental part of the work presents the results of experimental research involving the influence of refractive index of the cover on the coupling characteristics of sensor structures with grating couplers. The full widths at half maximum (FWHM) were from 0.023° to 0.029°. For the investigated structures we estimated detection thresholds for the changes of refractive index of the cover and the changes of sensitive film thickness. It has been demonstrated that by the application of the elaborated structures we can detect minimal changes of the refractive index (Δnc)min = 2.1×10−6 when the refractive index of the cover nc = 1.333 and (Δnc)min = 1.0×10−6 when nc = 1515. For sensitive films of the thickness w < 100 nm, by using the elaborated structures, we can detect mean changes of the thickness along the values lower than 10−3 nm.

The major objective in developing a robust digital watermarking algorithm is to obtain the highest possible robustness without losing the visual imperceptibility. To achieve this objective, we proposed in this paper an optimal image watermarking scheme using multi-objective particle swarm optimization (MOPSO) and singular value decomposition (SVD) in wavelet domain. Having decomposed the original image into ten sub-bands, singular value decomposition is applied to a chosen detail sub-band. Then, the singular values of the chosen sub-band are modified by multiple scaling factors (MSF) to embed the singular values of watermark image. Various combinations of multiple scaling factors are possible, and it is difficult to obtain optimal solutions. Thus, in order to achieve the highest possible robustness and imperceptibility, multi-objective optimization of the multiple scaling factors is necessary. This work employs particle swarm optimization to obtain optimum multiple scaling factors. Experimental results of the proposed approach show both the significant improvement in term of imperceptibility and robustness under various attacks.