Structural health monitoring methods of cables in cable-stayed bridge: A review

Measurement - Tập 168 - Trang 108343 - 2021
Lixiao Zhang1,2, Guoyang Qiu3, Zhishou Chen4
1School of Civil Engineering, Dalian University of Technology, Dalian, 116024, China
2State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China
3Zhejiang Provincial Institute of Communications Planning, Design & Research, Hangzhou 310000, China
4Zhejiang Wenzhou Shenhai Highway Limited, Wenzhou 325000, China

Tài liệu tham khảo

Svensson, 2013

Mei, 2015, Application study on the first cable-stayed bridge with CFRP cables in China, J. Traffic Transp. Eng. (English Edition), 2, 242, 10.1016/j.jtte.2015.05.004

Podolny, 1972, Historical development of cable-stayed bridges, J. Struct. Div., 98

Qin, 2017, Developments and prospects of long-span high-speed railway bridge technologies in China, Engineering, 3, 787, 10.1016/j.eng.2017.11.001

JT/T 775-2016. Cable of parallel steel wires for large-span cable-stayed bridge. Beijing: China Communications Press, 2016 (in Chinese).

Casciati, 2003, An overview of structural health monitoring expertise within the European Union, Struct. Health Monit. Intell. Infrastruct., 31

Pines, 2002, Status of structural health monitoring of long-span bridges in the United States, Prog. Struct. Mat. Eng., 4, 372, 10.1002/pse.129

Yun, 2003, Recent R&D activities on structural health monitoring for civil infra-structures in Korea, KSCE J. Civ. Eng., 7, 637, 10.1007/BF02829136

J. Ou, The state-of-the-art and application of intelligent health monitoring systems for civil infrastructures in mainland of China, Prog. Struct. Eng. Mech. Comput. (2004) 599–608.

Ou, 2010, Structural health monitoring in mainland China: review and future trends, Struct. Health Monit., 9, 219, 10.1177/1475921710365269

Fujino, 2011, Bridge monitoring in Japan: the needs and strategies, Struct. Infrastruct. Eng., 7, 597, 10.1080/15732479.2010.498282

Li, 2016, The state of the art in structural health monitoring of cable-stayed bridges, J. Civ. Struct. Health Monit., 6, 43, 10.1007/s13349-015-0115-x

Yang, 2018, State-of-the-art review on modal identification and damage detection of bridges by moving test vehicles, Int. J. Struct. Stab. Dyn., 18, 1850025, 10.1142/S0219455418500256

Alamdari, 2019, Damage diagnosis in bridge structures using rotation influence line: Validation on a cable-stayed bridge, Eng. Struct., 185, 1, 10.1016/j.engstruct.2019.01.124

Zarbaf, 2018

Mehrabi, 2006, In-service evaluation of cable-stayed bridges, overview of available methods and findings, J. Bridge Eng., 11, 716, 10.1061/(ASCE)1084-0702(2006)11:6(716)

Armin B. Mehrabi et al., Health monitoring of cable-stayed bridges-A case study, Structures 2004: Building on the Past, Securing the Future, 2004, pp. 1-–8.

Liu, 2018, A review of cable force testing, Henan Build. Mater., 02, 241

Zhang, 2013, An efficient algorithm for mechanical analysis of bimodular truss and tensegrity structures, Int. J. Mech. Sci., 70, 57, 10.1016/j.ijmecsci.2013.02.002

Fallis, 1997, Hanging shapes of nonuniform cables, Am. J. Phys., 65, 117, 10.1119/1.18505

Levien, 2008

Pevrot, 1979, Analysis of cable structures, Comput. Struct., 10, 805, 10.1016/0045-7949(79)90044-0

Fleming, 1979, Nonlinear static analysis of cable-stayed bridge structures, Comput. Struct., 10, 621, 10.1016/0045-7949(79)90006-3

D.U. Guohua et al., Structural Analysis in the Bridge, Tongji University Press, Shanghai, 1994, pp. 222–224 (in Chinese).

H.M. Irvine, T.K. Caughey, The linear theory of free vibrations of a suspended cable, Proc. Roy. Soc. Lond. Math. Phys. Sci. 341(1626) (1974) 299–315.

Gentile, 2010, Deflection measurement on vibrating stay cables by non-contact microwave interferometer, NDT E Int., 43, 231, 10.1016/j.ndteint.2009.11.007

Chen, 2005, Nondestructive bridge cable tension assessment using laser vibrometry, Exp. Tech., 29, 29, 10.1111/j.1747-1567.2005.tb00210.x

Benedettini, 2011, Operational modal testing and FE model tuning of a cable-stayed bridge, Eng. Struct., 33, 2063, 10.1016/j.engstruct.2011.02.046

Li, 2010, A numerical and experimental hybrid approach for the investigation of aerodynamic forces on stay cables suffering from rain-wind induced vibration, J. Fluids Struct., 26, 1195, 10.1016/j.jfluidstructs.2010.06.006

Ren, 2005, Experimental and analytical studies on dynamic characteristics of a large span cable-stayed bridge, Eng. Struct., 27, 535, 10.1016/j.engstruct.2004.11.013

Huynh, 2016, Structural identification of cable-stayed bridge under back-to-back typhoons by wireless vibration monitoring, Measurement, 88, 385, 10.1016/j.measurement.2016.03.032

Zui, 1996, Practical formulas for estimation of cable tension by vibration method, J. Struct. Eng., 122, 651, 10.1061/(ASCE)0733-9445(1996)122:6(651)

Jiangbo Sun, Frequency Vibration Based Cable Tension Force Measurement for Cable-Stayed Bridges, Beijing Forestry University, 2012 (in Chinese).

Sun, 2011, Measuring methods of cable tension in cable-stayed bridges, vol. 295, 1230

Brice, 2008, Development and validation of a method to directly measure the cable force during the hammer throw, Sports Biomech., 7, 274, 10.1080/14763140701841902

Zalt, 2007, Evaluating sensors for bridge health monitoring, 368

Förster, 1986, New findings in the field of non-destructive magnetic leakage field inspection, NDT Int., 19, 3, 10.1016/0308-9126(86)90134-3

Bergamini, 2001, Nondestructive testing of stay cables, vol. 84, no. 2, 16

McGogney, 1995, Magnetic flux leakage for bridge inspection, Nondestruct. Testing Methods Civ. Infrastruct., 31, 10.1061/9780784401316.003

Christen, 2003, Three-dimensional localization of defects in stay cables using magnetic flux leakage methods, J. Nondestr. Eval., 22, 93, 10.1023/B:JONE.0000010736.74285.b6

Park, 2014, Magnetic flux leakage sensing-based steel cable NDE technique, Shock Vib., 2014

Zuoying, 2006, 3D FEM analysis in magnetic flux leakage method, NDT E Int., 39, 61, 10.1016/j.ndteint.2005.06.006

Xu, 2012, Inspection method of cable-stayed bridge using magnetic flux leakage detection: Principle, sensor design, and signal processing, J. Mech. Sci. Technol., 26, 661, 10.1007/s12206-011-1234-x

Duan, 2016, Development of elasto-magneto-electric (EME) sensor for in-service cable force monitoring, Int. J. Struct. Stab. Dyn., 16, 1640016, 10.1142/S0219455416400162

Cho, 2013, Comparative field study of cable tension measurement for a cable-stayed bridge, J. Bridge Eng., 18, 748, 10.1061/(ASCE)BE.1943-5592.0000421

Kim, 2018, Magnetic flux leakage sensing and artificial neural network pattern recognition-based automated damage detection and quantification for wire rope non-destructive evaluation, Sensors, 18, 109, 10.3390/s18010109

Qu, 2019, Research on the method of predicting corrosion width of cables based on the spontaneous magnetic flux leakage, Materials, 12, 2154, 10.3390/ma12132154

Sumitro, 2002, Elasto-magnetic sensor utilization on steel cable stress measurement, 13

Yishu, 2019, Design of by-pass excitation cable force sensor, J. Phys. Conf. Ser., 1267, 10.1088/1742-6596/1267/1/012068

Kim, 2019, Cross-sectional loss quantification for main cable NDE based on the BH loop measurement using a total flux sensor, J. Sensors, 2019, 10.1155/2019/8014102

Kim, 2019, MFL-based local damage diagnosis and SVM-based damage type classification for wire rope, NDE Mater, 12, 2894, 10.3390/ma12182894

Mehrabi, 2010, Evaluation, rehabilitation planning, and stay-cable replacement design for the hale boggs bridge in Luling, Louisiana, J. Bridge Eng., 15, 364, 10.1061/(ASCE)BE.1943-5592.0000061

Zhou, 2014, A summary review of correlations between temperatures and vibration properties of long-span bridges, Math. Problems Eng., 2014

Bao, 2017, Identification of time-varying cable tension forces based on adaptive sparse time-frequency analysis of cable vibrations, Struct. Control Health Monit., 24, 10.1002/stc.1889

Fang, 2012, Practical formula for cable tension estimation by vibration method, J. Bridge Eng., 17, 161, 10.1061/(ASCE)BE.1943-5592.0000200

Øiseth, 2015, Monitoring wind velocities and dynamic response of the Hardanger Bridge, 117

Zuo, 2010, Interpretation of field observations of wind-and rain-wind-induced stay cable vibrations, J. Wind Eng. Ind. Aerodyn., 98, 73, 10.1016/j.jweia.2009.09.004

Kim, 2007, Estimation of cable tension force using the frequency-based system identification method, J. Sound Vib., 304, 660, 10.1016/j.jsv.2007.03.012

Grosse, 2008

Zejli, 2012, Detection of the presence of broken wires in cables by acoustic emission inspection, J. Bridge Eng., 17, 921, 10.1061/(ASCE)BE.1943-5592.0000404

Rizzo, 2001, Acoustic emission monitoring of carbon-fiber-reinforced-polymer bridge stay cables in large-scale testing, Exp. Mech., 41, 282, 10.1007/BF02323146

Li, 2011, Estimation and warning of fatigue damage of FRP stay cables based on acoustic emission techniques and fractal theory, Comput.-Aided Civ. Infrastruct. Eng., 26, 500, 10.1111/j.1467-8667.2010.00713.x

Li, 2012, Acoustic emission technique for monitoring stay cable fatigue damage evolution of multi-aged bridge, J. Vib. Shock, 31, 67

Grosse, 2010, Acoustic emission (AE) evaluation of reinforced concrete structures, 185

Sabri, 2015, Fiber optic sensors: short review and applications, 299

He, 2013, Optic fiber sensor-based smart bridge cable with functionality of self-sensing, Mech. Syst. Sig. Process., 35, 84, 10.1016/j.ymssp.2012.08.022

Scarella, 2017, Dynamic brillouin scattering–based condition assessment of cables in cable-stayed bridges, J. Bridge Eng., 22, 04016130, 10.1061/(ASCE)BE.1943-5592.0001010

Ghoshal, 2015, Experimental investigations in embedded sensing of composite components in aerospace vehicles, Compos. B Eng., 71, 52, 10.1016/j.compositesb.2014.10.050

Hu, 2017, Cable force health monitoring of Tongwamen bridge based on fiber Bragg grating, Appl. Sci., 7, 384, 10.3390/app7040384

Zheng, 2018, Investigation of measurability and reliability of adhesive-bonded built-in fiber Bragg grating sensors on steel wire for bridge cable force monitoring, Measurement, 129, 349, 10.1016/j.measurement.2018.07.053

Li, 2011, Development and sensing properties study of FRP–FBG smart stay cable for bridge health monitoring applications, Measurement, 44, 722, 10.1016/j.measurement.2011.01.005

Sun, 2015, Application of optical fiber Bragg grating strain gauge to cable force monitoring of FAST, Opt. Precision Eng., 23, 919, 10.3788/OPE.20152304.0919

Zhang, 2006, Long-term monitoring FBG-based cable load sensor, vol. 6167, 61671I

Fiber Bragg grating sensors: recent advancements, industrial applications and market exploitation, Bentham Science Publishers, 2011.

Li, 2015, FBG force-testing ring for bridge cable force monitoring and temperature compensation, Sens. Actuators, A, 223, 105, 10.1016/j.sna.2015.01.003

Zhao, 2017, Experimental verification for cable force estimation using handheld shooting of smartphones, J. Sensors, 2017, 10.1155/2017/5625396

Wang, 2019, Automatic damage detection of historic masonry buildings based on mobile deep learning, Autom. Constr., 103, 53, 10.1016/j.autcon.2019.03.003

Y. Yu, X. Zhao, J. Ou, A new idea: Mobile structural health monitoring using Smart phones, in: 2012 Third International Conference on Intelligent Control and Information Processing, IEEE, 2012, pp. 714–716.

Zhao, 2015, Cable force monitoring system of cable stayed bridges using accelerometers inside mobile smart phone, vol. 9435, 94351H

Zhao, 2017, Smartphone-based mobile testing technique for quick bridge cable–force measurement, J. Bridge Eng., 22, 06016012, 10.1061/(ASCE)BE.1943-5592.0001011

Morgenthal, 2018, Determination of stay-cable forces using highly mobile vibration measurement devices, J. Bridge Eng., 23, 04017136, 10.1061/(ASCE)BE.1943-5592.0001166

Gehle, 1998, Tracking the multi-component motion of a cable using a television camera, Smart Mater. Struct., 7, 43, 10.1088/0964-1726/7/1/006

Ye, 2016, Force monitoring of steel cables using vision-based sensing technology: methodology and experimental verification, Smart Struct. Syst., 18, 585, 10.12989/sss.2016.18.3.585

Feng, 2017, Cable tension force estimate using novel noncontact vision-based sensor, Measurement, 99, 44, 10.1016/j.measurement.2016.12.020

Kim, 2013, Vision-based monitoring system for evaluating cable tensile forces on a cable-stayed bridge, Struct. Health Monit., 12, 440, 10.1177/1475921713500513

Du, 2020, Dynamic measurement of stay-cable force using digital image techniques, Measurement, 151, 10.1016/j.measurement.2019.107211

Feltrin, 2010, Long-term monitoring of cable stays with a wireless sensor network, Struct. Infrastruct. Eng., 6, 535, 10.1080/15732470903068573

Michie, 1994, Machine learning, Neural Statist. Classif., 1994, 1

Feng, 2018, Computer vision for SHM of civil infrastructure: From dynamic response measurement to damage detection–A review, Eng. Struct., 156, 105, 10.1016/j.engstruct.2017.11.018

Sun, 2020, Review of bridge structural health monitoring aided by big data and artificial intelligence: from condition assessment to damage detection, J. Struct. Eng., 146, 04020073, 10.1061/(ASCE)ST.1943-541X.0002535

Pan, 2018, Time-frequency-based data-driven structural diagnosis and damage detection for cable-stayed bridges, J. Bridge Eng., 23, 04018033, 10.1061/(ASCE)BE.1943-5592.0001199

Santos, 2015, Static-based early-damage detection using symbolic data analysis and unsupervised learning methods, Front. Struct. Civ. Eng., 9, 1, 10.1007/s11709-014-0277-3

Cunha, 1999, Dynamic measurements on stay cables of cable-stayed bridges using an interferometry laser system, Exp. Tech., 23, 38, 10.1111/j.1747-1567.1999.tb01570.x

Thông tin
Thông tin xuất bản

Measurement

Tập 168

108343

Thông tin tác giả