FBG force-testing ring for bridge cable force monitoring and temperature compensation
Tóm tắt
Từ khóa
Tài liệu tham khảo
Byeonc, 2007, Estimation of cable tension force using the frequency-based system identification method, J. Sound Vibrat., 304, 600
Ren, 2005, Empirical formulas to estimate cable tension by cable fundamental frequency, Struct. Eng. Mechan., 0, 363, 10.12989/sem.2005.20.3.363
Tadayuki, 1994, Estimating method of cable tension from natural frequency of high mode, Proc. Jpn. Soc. Civil Eng., 01, 163
Ceballos, 2008, Determination of the axial force on stay cables accounting for their bending stiffness and rotational end restrains by free vibration tests, J. Sound Vibrat., 317, 127, 10.1016/j.jsv.2008.02.048
M.L. Wang, Z.L. Chen, S.S. Koontz, et al., Magnetoelastic permeability measurement for stress monitoring in steel tendons and cables, Nondestructive Evaluation of Highways, Utilities, and Pipelines IV, Proceedings of SPIE 3995, 2000.
M.L. Wang, G. Lloyd, O. Hovorka, Development of a remote coil magneto-elastic stress sensor for steel cables, SPIE 8th Annual International Symposium on Smart Structures and Material, Health Monitoring and Management of Civil Infrastructure Systems Newport Beach CA, 2001.
Zhou, 2005, The application of fiber Bragg grating sensor to high precision strain measurement, Progr. Geophys., 9, 864
Todd, 2001, Deployment of a fiber Bragg grating-based measurement system in a structural health monitoring application, Smart Mater. Struct., 10, 534, 10.1088/0964-1726/10/3/316
Prohaska, 1993, Fiber optic Bragg grating strain sensor in large scale concrete structures, Proc. SPIE, 1798, 286, 10.1117/12.141330
Alavie, 1994, Application and characterization of intracore grating sensors in CFRP prestressed girder concrete, Proc. SPIE, 2191, 103, 10.1117/12.173937
Chan, 2006, Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge: backgroud and experimental observation, Eng. Struct., 28, 648, 10.1016/j.engstruct.2005.09.018
Nan, 2006, Study and application of FBG force-testing ring, J. Huazhong Univ. Sci. Tech. (Nature Science Edition), 9, 63
M.R. Mokhtar, T. Sun, K.T.V. Grattan, et al., Arch-bridge lift process monitoring by using packaged optical fibre strain sensors with temperature compensation, J. Phys.: Conf. Ser. 307 (1) (2011) 12029–12035(7).
Jung, 1999, Simultaneous measurement of strain and temperature by use of a single-fiber Bragg grating and an erbium-doped fiber amplifier, Appl. Opt., 38, 2749, 10.1364/AO.38.002749
Du, 1999, Fiber Bragg grating cavity sensor for simultaneous measurement of strain and temperature, IEEE Photon. Technol. Lett., 11, 105, 10.1109/68.736409
Bhatia, 1997, Simultaneous strain and temperature measurement with long-period gratings, Opt. Lett., 22, 648, 10.1364/OL.22.000648