A mini-review on alkaline stability of imidazolium cations and imidazolium-based anion exchange membranes
Tài liệu tham khảo
Choi, 2010, Nanofiber composite membranes with low equivalent weight perfluorosulfonic acid polymers, J. Mater. Chem., 20, 6282, 10.1039/c0jm00441c
Di Noto, 2010, Structure-relaxation interplay of a new nanostructured membrane based on tetraethylammonium trifluoromethanesulfonate ionic liquid and neutralized nafion 117 for high-temperature fuel cells, J. Am. Chem. Soc., 132, 2183, 10.1021/ja906975z
Dutta, 2014, Utilization of conducting polymers in fabricating polymer electrolyte membranes for application in direct methanol fuel cells, Polym. Rev., 54, 1, 10.1080/15583724.2013.839566
Dutta, 2014, A review on aromatic conducting polymers-based catalyst supporting matrices for application in microbial fuel cells, Polym. Rev., 54, 401, 10.1080/15583724.2014.881372
Si, 2013, Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications, J. Polym. Sci. B Polym. Phys., 51, 1311, 10.1002/polb.23334
Ye, 2010, Preparation and characterization of high-durability zwitterionic crosslinked proton exchange membranes, J. Membr. Sci., 362, 29, 10.1016/j.memsci.2010.06.004
Gu, 2011, Self-crosslinking for dimensionally stable and solvent-resistant quaternary phosphonium based hydroxide exchange membranes, Chem. Commun., 47, 2856, 10.1039/c0cc04335d
Kim, 2015, Fuel cell membrane characterizations, Polym. Rev., 55, 330, 10.1080/15583724.2015.1011275
Marino, 2015, Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids, ChemSusChem, 8, 513, 10.1002/cssc.201403022
Maurya, 2015, A review on recent developments of anion exchange membranes for fuel cells and redox flow batteries, RSC Adv., 5, 37206, 10.1039/C5RA04741B
Meek, 2015, Polymerized ionic liquid block copolymers for electrochemical energy, J. Mater. Chem., 3, 24187, 10.1039/C5TA07170D
Omasta, 2018, Importance of balancing membrane and electrode water in anion exchange membrane fuel cells, J. Power Sources, 375, 205, 10.1016/j.jpowsour.2017.05.006
Sleightholme, 2008, Oxygen reduction at the silver/hydroxide-exchange membrane interface, Electrochem. Commun., 10, 151, 10.1016/j.elecom.2007.11.008
Wagner, 2004, Long term investigations of silver cathodes for alkaline fuel cells, J. Power Sources, 127, 264, 10.1016/j.jpowsour.2003.09.022
Zhang, 2015, Anion‐exchange membranes for fuel cells: synthesis strategies, properties and perspectives, Fuel Cell., 15, 761, 10.1002/fuce.201500039
Gottesfeld, 2018, Anion exchange membrane fuel cells: current status and remaining challenges, J. Power Sources, 375, 170, 10.1016/j.jpowsour.2017.08.010
Vijayakumar, 2019, Recent advancements in applications of alkaline anion exchange membranes for polymer electrolyte fuel cells, J. Ind. Eng. Chem., 70, 70, 10.1016/j.jiec.2018.10.026
An, 2012, Comparison of different types of membrane in alkaline direct ethanol fuel cells, Int. J. Hydrogen Energy, 37, 14536, 10.1016/j.ijhydene.2012.06.105
Pham, 2017, N-spirocyclic quaternary ammonium ionenes for anion-exchange membranes, J. Am. Chem. Soc., 139, 2888, 10.1021/jacs.6b12944
Zhu, 2017, Mechanically robust anion exchange membranes via long hydrophilic cross-linkers, Macromolecules, 50, 2329, 10.1021/acs.macromol.6b01381
Pan, 2012, Designing advanced alkaline polymer electrolytes for fuel cell applications, Acc. Chem. Res., 45, 473, 10.1021/ar200201x
Chen, 2012, Degradation of imidazolium-and quaternary ammonium-functionalized poly (fluorenyl ether ketone sulfone) anion exchange membranes, ACS Appl. Mater. Interfaces, 4, 5775, 10.1021/am301557w
Yang, 2017, Highly anion conductive, alkyl-chain-grafted copolymers as anion exchange membranes for operable alkaline H 2/O 2 fuel cells, J. Mater. Chem., 5, 10301, 10.1039/C7TA00481H
Mohanty, 2016, Systematic alkaline stability study of polymer backbones for anion exchange membrane applications, Macromolecules, 49, 3361, 10.1021/acs.macromol.5b02550
Pan, 2017, Cationic side-chain attachment to poly (phenylene oxide) backbones for chemically stable and conductive anion exchange membranes, Chem. Mater., 29, 5321, 10.1021/acs.chemmater.7b01494
Si, 2014, Alkaline stable imidazolium-based ionomers containing poly (arylene ether sulfone) side chains for alkaline anion exchange membranes, J. Mater. Chem., 2, 4413, 10.1039/c3ta15178f
Han, 2015, An effective approach for alleviating cation-induced backbone degradation in aromatic ether-based alkaline polymer electrolytes, ACS Appl. Mater. Interfaces, 7, 2809, 10.1021/am508009z
Dang, 2015, Poly (phenylene oxide) functionalized with quaternary ammonium groups via flexible alkyl spacers for high-performance anion exchange membranes, J. Mater. Chem., 3, 5280, 10.1039/C5TA00350D
Hibbs, 2009, Poly (phenylene)-based anion exchange membranes for alkaline fuel cells, ECS Trans., 19, 89, 10.1149/1.3253365
Lee, 2017, Highly conductive and durable poly(arylene ether sulfone) anion exchange membrane with end-group cross-linking, Energy Environ. Sci., 10, 275, 10.1039/C6EE03079C
Li, 2015, Polyethylene-based block copolymers for anion exchange membranes, Macromolecules, 48, 6523, 10.1021/acs.macromol.5b01457
Pan, 2015, Mechanically tough and chemically stable anion exchange membranes from rigid-flexible semi-interpenetrating networks, Chem. Mater., 27, 6689, 10.1021/acs.chemmater.5b02557
Vandiver, 2014, Mechanical characterization of anion exchange membranes by extensional rheology under controlled hydration, J. Electrochem. Soc., 161, H677, 10.1149/2.0971410jes
Wang, 2009, Preparation of alkaline anion exchange membranes based on functional poly (ether-imide) polymers for potential fuel cell applications, J. Membr. Sci., 326, 4, 10.1016/j.memsci.2008.09.037
Weiber, 2015, Polysulfones with highly localized imidazolium groups for anion exchange membranes, J. Membr. Sci., 481, 164, 10.1016/j.memsci.2015.02.002
Xue, 2017, UV-crosslinking of polystyrene anion exchange membranes by azidated macromolecular crosslinker for alkaline fuel cells, J. Membr. Sci., 535, 322, 10.1016/j.memsci.2017.04.049
Yan, 2017, Anion exchange membranes by bromination of tetramethylbiphenol-based poly(sulfone)s, Polym. Chem., 8, 2442, 10.1039/C7PY00026J
Yang, 2016, Highly stable poly(ethylene glycol)-grafted alkaline anion exchange membranes, J. Mater. Chem., 4, 3886, 10.1039/C6TA00200E
Yang, 2014, A stable anion exchange membrane based on imidazolium salt for alkaline fuel cell, J. Membr. Sci., 467, 48, 10.1016/j.memsci.2014.05.017
Yang, 2015, A strategy to construct alkali-stable anion exchange membranes bearing ammonium groups via flexible spacers, J. Mater. Chem., 3, 15015, 10.1039/C5TA02941D
Zhu, 2016, Functionalization of poly(2,6-dimethyl-1,4-phenylene oxide)s with hindered fluorene side chains for anion exchange membranes, Macromolecules, 49, 3300, 10.1021/acs.macromol.6b00578
Zhu, 2016, Multication side chain anion exchange membranes, Macromolecules, 49, 815, 10.1021/acs.macromol.5b02671
Deavin, 2012, Anion-exchange membranes for alkaline polymer electrolyte fuel cells: comparison of pendent benzyltrimethylammonium-and benzylmethylimidazolium-head-groups, Energy Environ. Sci., 5, 8584, 10.1039/c2ee22466f
Zhuo, 2015, Enhancement of hydroxide conductivity by grafting flexible pendant imidazolium groups into poly (arylene ether sulfone) as anion exchange membranes, J. Mater. Chem., 3, 18105, 10.1039/C5TA04257G
Hickner, 2013, Anion exchange membranes: current status and moving forward, J. Polym. Sci. B Polym. Phys., 51, 1727, 10.1002/polb.23395
Mahmoud, 2017, High hydroxide ion conductivity with enhanced alkaline stability of partially fluorinated and quaternized aromatic copolymers as anion exchange membranes, Macromolecules, 50, 4256, 10.1021/acs.macromol.7b00401
Strasser, 2017, Base stable poly(diallylpiperidinium hydroxide) multiblock copolymers for anion exchange membranes, J. Mater. Chem., 5, 9627, 10.1039/C7TA00905D
Meek, 2016, Alkaline chemical stability and ion transport in polymerized ionic liquids with various backbones and cations, Macromolecules, 49, 3382, 10.1021/acs.macromol.6b00434
Meek, 2015, Alkaline chemical stability of polymerized ionic liquids with various cations, Macromolecules, 48, 7071, 10.1021/acs.macromol.5b01223
Hugar, 2015, Imidazolium cations with exceptional alkaline stability: a systematic study of structure–stability relationships, J. Am. Chem. Soc., 137, 8730, 10.1021/jacs.5b02879
Dang, 2015, Exploring different cationic alkyl side chain designs for enhanced alkaline stability and hydroxide ion conductivity of anion-exchange membranes, Macromolecules, 48, 5742, 10.1021/acs.macromol.5b01302
Dekel, 2017, Effect of water on the stability of quaternary ammonium groups for anion exchange membrane fuel cell applications, Chem. Mater., 29, 4425, 10.1021/acs.chemmater.7b00958
Han, 2017, Elastic long-chain multication cross-linked anion exchange membranes, Macromolecules, 50, 3323, 10.1021/acs.macromol.6b01140
Kim, 2017, Synthesis and characterization of anion exchange multi-block copolymer membranes with a fluorine moiety as alkaline membrane fuel cells, J. Power Sources, 359, 568, 10.1016/j.jpowsour.2017.05.086
Li, 2012, Synthesis and properties of anion conductive ionomers containing tetraphenyl methane moieties, ACS Appl. Mater. Interfaces, 4, 3627, 10.1021/am3007005
Lin, 2016, Side-chain-type anion exchange membranes bearing pendant quaternary ammonium groups via flexible spacers for fuel cells, J. Mater. Chem., 4, 13938, 10.1039/C6TA05090E
Liu, 2017, Self-crosslinking of comb-shaped polystyrene anion exchange membranes for alkaline fuel cell application, J. Membr. Sci., 536, 133, 10.1016/j.memsci.2017.05.006
Liu, 2013, Naphthalene-based poly(arylene ether ketone) anion exchange membranes, J. Mater. Chem., 1, 6481, 10.1039/c3ta10355b
Miyanishi, 2015, Synthesis and property of semicrystalline anion exchange membrane with well-defined ion channel structure, Macromolecules, 48, 2576, 10.1021/ma502448g
Mohanty, 2015, Stable elastomeric anion exchange membranes based on quaternary ammonium-tethered polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene triblock copolymers, Macromolecules, 48, 7085, 10.1021/acs.macromol.5b01382
Nuñez, 2016, N-alkyl interstitial spacers and terminal pendants influence the alkaline stability of tetraalkylammonium cations for anion exchange membrane fuel cells, Chem. Mater., 28, 2589, 10.1021/acs.chemmater.5b04767
Tsai, 2015, Thermally cross-linked anion exchange membranes from solvent processable isoprene containing ionomers, Macromolecules, 48, 655, 10.1021/ma502362a
Yang, 2015, Poly(2,6-dimethyl-1,4-phenylene oxide)-b-poly(vinylbenzyltrimethylammonium) diblock copolymers for highly conductive anion exchange membranes, Macromolecules, 48, 4471, 10.1021/acs.macromol.5b00459
Zhang, 2013, Aromatic polyelectrolytes via polyacylation of pre-quaternized monomers for alkaline fuel cells, J. Mater. Chem., 1, 2595, 10.1039/c2ta01178f
Qiu, 2012, Alkaline imidazolium-and quaternary ammonium-functionalized anion exchange membranes for alkaline fuel cell applications, J. Mater. Chem., 22, 1040, 10.1039/C1JM14331J
Gao, 2016, Anion exchange membranes with well-defined ion transporting nanochannels via self-assembly of polymerizable ionic liquids, J. Mater. Chem., 4, 13316, 10.1039/C6TA05223A
Guo, 2017, Clustered multi-imidazolium side chains functionalized alkaline anion exchange membranes for fuel cells, J. Membr. Sci., 541, 214, 10.1016/j.memsci.2017.07.007
Guo, 2010, Synthesis and characterization of novel anion exchange membranes based on imidazolium-type ionic liquid for alkaline fuel cells, J. Membr. Sci., 362, 97, 10.1016/j.memsci.2010.06.026
Li, 2011, Novel anion exchange membranes based on polymerizable imidazolium salt for alkaline fuel cell applications, J. Mater. Chem., 21, 11340, 10.1039/c1jm11093d
Lin, 2017, Preparation and characterization of imidazolium-based membranes for anion exchange membrane fuel cell applications, Int. J. Hydrogen Energy, 42, 6988, 10.1016/j.ijhydene.2016.11.169
Salma, 2020, Imidazolium‐functionalized fluorene‐based anion exchange membrane (AEM) for fuel cell applications, ChemistrySelect, 5, 1255, 10.1002/slct.201903246
Zhang, 2011, Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application, J. Mater. Chem., 21, 12744, 10.1039/c1jm10656b
Liu, 2014, Anion transport in a chemically stable, sterically bulky α-C modified imidazolium functionalized anion exchange membrane, J. Phys. Chem. C, 118, 15136, 10.1021/jp5027674
Lin, 2010, Cross-linked alkaline ionic liquid-based polymer electrolytes for alkaline fuel cell applications, Chem. Mater., 22, 6718, 10.1021/cm102957g
Thomas, 2012, A stable hydroxide-conducting polymer, J. Am. Chem. Soc., 134, 10753, 10.1021/ja303067t
Arges, 2014, Simple and facile synthesis of water-soluble poly(phosphazenium) polymer electrolytes, RSC Adv., 4, 61869, 10.1039/C4RA13101K
Noonan, 2012, Phosphonium-functionalized polyethylene: a new class of base-stable alkaline anion exchange membranes, J. Am. Chem. Soc., 134, 18161, 10.1021/ja307466s
Döbbelin, 2012, Synthesis of pyrrolidinium-based poly(ionic liquid) electrolytes with poly(ethylene glycol) side chains, Chem. Mater., 24, 1583, 10.1021/cm203790z
Kong, 2009, Determination of the structure of a novel anion exchange fuel cell membrane by solid-state nuclear magnetic resonance spectroscopy, Macromolecules, 42, 1659, 10.1021/ma802613k
Gu, 2009, A soluble and highly conductive ionomer for high‐performance hydroxide exchange membrane fuel cells, Angew. Chem., 121, 6621, 10.1002/ange.200806299
Pham, 2015, Aromatic polymers incorporating bis-N-spirocyclic quaternary ammonium moieties for anion-exchange membranes, ACS Macro Lett., 4, 1370, 10.1021/acsmacrolett.5b00690
Zhang, 2012, Tertiary sulfonium as a cationic functional group for hydroxide exchange membranes, RSC Adv., 2, 12683, 10.1039/c2ra21402d
Kim, 2011, Guanidinium-functionalized anion exchange polymer electrolytes via activated fluorophenyl-amine reaction, Chem. Mater., 23, 3795, 10.1021/cm2016164
Mondal, 2017, Click mediated high-performance anion exchange membranes with improved water uptake, J. Mater. Chem., 5, 1022, 10.1039/C6TA09114H
Xue, 2017, Synthesis of novel guanidinium-based anion-exchange membranes with controlled microblock structures, J. Membr. Sci., 537, 151, 10.1016/j.memsci.2017.05.030
Zhang, 2010, A novel guanidinium grafted poly(aryl ether sulfone) for high-performance hydroxide exchange membranes, Chem. Commun., 46, 7495, 10.1039/c0cc01834a
Jiang, 2022, Imidazolium structural isomer pyrazolium: a better alkali-stable anion conductor for anion exchange membranes, J. Membr. Sci., 660, 10.1016/j.memsci.2022.120843
Chen, 2017, Cobaltocenium-containing polybenzimidazole polymers for alkaline anion exchange membrane applications, Polym. Chem., 8, 1381, 10.1039/C6PY01936F
Palaniselvam, 2016, Nanoporous graphene enriched with Fe/Co‐N active sites as a promising oxygen reduction electrocatalyst for anion exchange membrane fuel cells, Adv. Funct. Mater., 26, 2150, 10.1002/adfm.201504765
Zha, 2012, Metal-cation-based anion exchange membranes, J. Am. Chem. Soc., 134, 4493, 10.1021/ja211365r
Zhang, 2011, New polyethylene based anion exchange membranes (PE–AEMs) with high ionic conductivity, Macromolecules, 44, 5937, 10.1021/ma200836d
Varcoe, 2014, Anion-exchange membranes in electrochemical energy systems, Energy Environ. Sci., 7, 3135, 10.1039/C4EE01303D
Mohanty, 2014, Mechanistic analysis of ammonium cation stability for alkaline exchange membrane fuel cells, J. Mater. Chem., 2, 17314, 10.1039/C4TA03300K
Ye, 2012, 233
Lee, 2013, Synthesis and characterization of poly(benzimidazolium) membranes for anion exchange membrane fuel cells, Polym. Bull., 70, 2619, 10.1007/s00289-013-0978-0
Lin, 2011, A soluble and conductive polyfluorene ionomer with pendant imidazolium groups for alkaline fuel cell applications, Macromolecules, 44, 9642, 10.1021/ma202159d
Lin, 2013, Alkaline polymer electrolytes containing pendant dimethylimidazolium groups for alkaline membrane fuel cells, J. Mater. Chem., 1, 7262, 10.1039/c3ta10308k
Qiu, 2012, Bis-imidazolium-based anion-exchange membranes for alkaline fuel cells, J. Power Sources, 217, 329, 10.1016/j.jpowsour.2012.06.041
Rao, 2015, Comb-shaped alkyl imidazolium-functionalized poly(arylene ether sulfone)s as high performance anion-exchange membranes, J. Mater. Chem., 3, 8571, 10.1039/C5TA01123J
Thomas, 2011, Anion conducting poly(dialkyl benzimidazolium) salts, Polym. Chem., 2, 1641, 10.1039/c1py00142f
Ye, 2011, Relative chemical stability of imidazolium-based alkaline anion exchange polymerized ionic liquids, Macromolecules, 44, 8494, 10.1021/ma201864u
Gu, 2014, Highly stable N3-substituted imidazolium-based alkaline anion exchange membranes: experimental studies and theoretical calculations, Macromolecules, 47, 208, 10.1021/ma402334t
Hossain, 2014, Anion conductive aromatic membrane of poly (tetra phenyl ether sulfone) containing hexa-imidazolium hydroxides for alkaline fuel cell application, Solid State Ionics, 262, 754, 10.1016/j.ssi.2013.09.036
Weber, 2011, Effect of nanoscale morphology on the conductivity of polymerized ionic liquid block copolymers, Macromolecules, 44, 5727, 10.1021/ma201067h
Allen, 2013, Hydroxyalkyl-containing imidazolium homopolymers: correlation of structure with conductivity, Macromolecules, 46, 3037, 10.1021/ma302537f
Smith, 2013, Imidazole polymers derived from ionic liquid 4-vinylimidazolium monomers: their synthesis and thermal and dielectric properties, Macromolecules, 46, 1133, 10.1021/ma300862t
Rao, 2013, Imidazolium-functionalized poly (arylene ether sulfone) block copolymer as an anion exchange membrane for alkaline fuel cell, Polymer, 54, 111, 10.1016/j.polymer.2012.11.023
Wang, 2014, Hydroxide-ion induced degradation pathway for dimethylimidazolium groups in anion exchange membranes, J. Membr. Sci., 462, 112, 10.1016/j.memsci.2014.03.026
Pellerite, 2021, Characterizing cation chemistry for anion exchange membranes—para-alkyl-substituted benzyltetramethylimidazolium and benzyltrimethylammonium salts in base, J. Org. Chem., 86, 13481, 10.1021/acs.joc.1c01563
Long, 2014, Hydroxide degradation pathways for imidazolium cations: a DFT study, J. Phys. Chem. C, 118, 9880, 10.1021/jp501362y
Wang, 2014, Density functional theory study of hydroxide-ion induced degradation of imidazolium cations, Int. J. Hydrogen Energy, 39, 14355, 10.1016/j.ijhydene.2014.03.053
Kelemen, 2014, An abnormal N‐heterocyclic carbene–carbon dioxide adduct from imidazolium acetate ionic liquids: the importance of basicity, Chem.--Eur. J., 20, 13002, 10.1002/chem.201402912
Wang, 2013, Fast CO2 sequestration, activation, and catalytic transformation using N-heterocyclic olefins, J. Am. Chem. Soc., 135, 11996, 10.1021/ja405114e
Denk, 2001, Synthesis and reactivity of subvalent compounds: Part 11. Oxidation, hydrogenation and hydrolysis of stable diamino carbenes, J. Organomet. Chem., 617, 242, 10.1016/S0022-328X(00)00551-9
Aggarwal, 2002, Unexpected side reactions of imidazolium-based ionic liquids in the base-catalysed Baylis–Hillman reaction, Chem. Commun., 15, 1612, 10.1039/b203079a
Wang, 2013, Stabilizing the imidazolium cation in hydroxide‐exchange membranes for fuel cells, ChemSusChem, 6, 2079, 10.1002/cssc.201300285
Price, 2014, Relationships between structure and alkaline stability of imidazolium cations for fuel cell membrane applications, ACS Macro Lett., 3, 160, 10.1021/mz4005452
Tsuchitani, 2013, An initial degradation reaction before ring-opening in imidazolium-based anion exchange membranes: a DFT study, e-J. Surf. Sci. Nanotechnol., 11, 138, 10.1380/ejssnt.2013.138
Dong, 2014, Improving the alkaline stability of imidazolium cations by substitution, ChemPhysChem, 15, 3006, 10.1002/cphc.201402262
Wu, 2021, Tunable OH–transport and alkaline stability by imidazolium-based groups of poly (2, 6-dimethyl-1, 4-phenylene oxide) anion exchange membranes: a molecular dynamics simulation, Ind. Eng. Chem. Res., 60, 2481, 10.1021/acs.iecr.1c00230
Ren, 2019, Facile preparation of an ether-free anion exchange membrane with pendant cyclic quaternary ammonium groups, ACS Appl. Energy Mater., 2, 4576, 10.1021/acsaem.9b00674
Jannasch, 2016, Configuring anion‐exchange membranes for high conductivity and alkaline stability by using cationic polymers with tailored side chains, Macromol. Chem. Phys., 217, 1108, 10.1002/macp.201500481
Abdi, 2021, Synthesis of ionic polybenzimidazoles with broad ion exchange capacity range for anion exchange membrane fuel cell application, J. Polym. Sci., 59, 2069, 10.1002/pol.20210409
Das, 2022, Cross-Linked alkaline anion exchange membrane from N-spirocyclic quaternary ammonium and polybenzimidazole, ACS Applied Polymer Materials, 4, 1523, 10.1021/acsapm.1c01926
Zhang, 2022, The inhibiting water uptake mechanism of main-chain type N-spirocyclic quaternary ammonium ionene blended with polybenzimidazole as anion exchange membrane, Separ. Purif. Technol., 291, 10.1016/j.seppur.2022.120950
Jheng, 2021, Anion exchange membranes based on imidazoline quaternized polystyrene copolymers for fuel cell applications, Membranes, 11, 901, 10.3390/membranes11110901
Ahmed Mahmoud, 2022
Pan, 2021, Green preparation of quaternized vinylimidazole-based anion exchange membrane by photopolymerization, Separ. Purif. Technol., 276, 10.1016/j.seppur.2021.119220
Mahmoud, 2018, Optimization of the pendant chain length in partially fluorinated aromatic anion exchange membranes for alkaline fuel cells, J. Mater. Chem., 6, 14400, 10.1039/C8TA04310H
Arges, 2013, Two-dimensional NMR spectroscopy reveals cation-triggered backbone degradation in polysulfone-based anion exchange membranes, Proc. Natl. Acad. Sci. USA, 110, 2490, 10.1073/pnas.1217215110
Fan, 2019, Poly (bis-arylimidazoliums) possessing high hydroxide ion exchange capacity and high alkaline stability, Nat. Commun., 10, 1, 10.1038/s41467-019-10292-z
Fan, 2017, Cationic polyelectrolytes, stable in 10 M KOHaq at 100° C, ACS Macro Lett., 6, 1089, 10.1021/acsmacrolett.7b00679
You, 2018, Synthesis of alkaline anion exchange membranes with chemically stable imidazolium cations: unexpected cross-linked macrocycles from ring-fused ROMP monomers, Macromolecules, 51, 3212, 10.1021/acs.macromol.8b00209
You, 2019, Highly conductive and chemically stable alkaline anion exchange membranes via ROMP of trans-cyclooctene derivatives, Proc. Natl. Acad. Sci. USA, 116, 9729, 10.1073/pnas.1900988116
Wang, 2021, Synthesis and characterization of long-side-chain type quaternary ammonium-functionalized poly (ether ether ketone) anion exchange membranes, Int. J. Hydrogen Energy, 46, 8156, 10.1016/j.ijhydene.2020.11.281
Hu, 2020, Dual hydrophobic modifications toward anion exchange membranes with both high ion conductivity and excellent dimensional stability, J. Membr. Sci., 595, 10.1016/j.memsci.2019.117521
Sheng, 2020, Quaternized poly (2, 6-dimethyl-1, 4-phenylene oxide) anion exchange membranes with pendant sterically-protected imidazoliums for alkaline fuel cells, J. Membr. Sci., 601, 10.1016/j.memsci.2020.117881
Noh, 2019, Molecular engineering of hydroxide conducting polymers for anion exchange membranes in electrochemical energy conversion Technology, Accounts Chem. Res., 52, 2745, 10.1021/acs.accounts.9b00355
Lee, 2019, Development of highly alkaline stable OH–-Conductors based on imidazolium cations with various substituents for anion exchange membrane-based alkaline fuel cells, J. Phys. Chem. C, 123, 13508, 10.1021/acs.jpcc.9b02991
Xue, 2021, Facile preparation of highly alkaline stable poly (arylene–imidazolium) anion exchange membranes through an ionized monomer strategy, Macromolecules, 54, 2202, 10.1021/acs.macromol.0c02612
Yang, 2020, The effect of polymer backbones and cation functional groups on properties of anion exchange membranes for fuel cells, J. Membr. Sci., 603, 10.1016/j.memsci.2020.118025
Zhang, 2022, Mechanically flexible bulky imidazolium-based anion exchange membranes by grafting PEG pendants for alkaline fuel cells, J. Membr. Sci., 659, 10.1016/j.memsci.2022.120820
Li, 2022, Stable alkoxy chain enhanced anion exchange membrane and its fuel cell, J. Membr. Sci., 644, 10.1016/j.memsci.2021.120179
He, 2020, Alkaline anion exchange membranes with imidazolium-terminated flexible side-chain cross-linked topological structure based on ROMP-type norbornene copolymers, Polymer, 195, 10.1016/j.polymer.2020.122412
Chen, 2019, Highly conducting anion-exchange membranes based on cross-linked poly(norbornene): ring opening metathesis polymerization, ACS Appl. Energy Mater., 2, 2458, 10.1021/acsaem.8b02052
Yang, 2015, Highly alkaline stable N1-alkyl substituted 2-methylimidazolium functionalized alkaline anion exchange membranes, J. Mater. Chem., 3, 8559, 10.1039/C5TA00562K
Hao, 2017, Fabrication of N1-butyl substituted 4, 5-dimethyl-imidazole based crosslinked anion exchange membranes for fuel cells, RSC Adv., 7, 52812, 10.1039/C7RA08966J
Zhang, 2020, Enhancement of the mechanical properties of anion exchange membranes with bulky imidazolium by “thiol-ene” crosslinking, J. Membr. Sci., 596, 10.1016/j.memsci.2019.117700
He, 2022, Preparation and performance of bisimidazole cationic crosslinked addition-type polynorbornene-based anion exchange membrane, Int. J. Hydrogen Energy, 47, 69, 10.1016/j.ijhydene.2021.08.237
Xu, 2021, Cross-linked anion exchange membranes with flexible, long-chain, bis-imidazolium cation cross-linker, Int. J. Hydrogen Energy, 46, 37039, 10.1016/j.ijhydene.2021.08.181
Yang, 2021, Macromolecular crosslink of imidazole functionalized poly (vinyl alcohol) and brominated poly (phenylene oxide) for anion exchange membrane with enhanced alkaline stability and ionic conductivity, Int. J. Hydrogen Energy, 46, 37007, 10.1016/j.ijhydene.2021.08.184
Yang, 2021, Mechanically robust semi-interpenetrating polymer network via thiol-ene chemistry with enhanced conductivity for anion exchange membranes, Int. J. Hydrogen Energy, 46, 10377, 10.1016/j.ijhydene.2020.12.145
Guo, 2016, Imidazolium-functionalized poly(arylene ether sulfone) anion-exchange membranes densely grafted with flexible side chains for fuel cells, ACS Appl. Mater. Interfaces, 8, 25279, 10.1021/acsami.6b07711
Zhang, 2020, Bis-imidazolium functionalized self-crosslinking block polynorbornene anion exchange membrane, Int. J. Hydrogen Energy, 45, 13090, 10.1016/j.ijhydene.2020.03.046
Du, 2020, Constructing micro-phase separation structure by multi-arm side chains to improve the property of anion exchange membrane, Int. J. Hydrogen Energy, 45, 17916, 10.1016/j.ijhydene.2020.04.264
Yang, 2020, Cross-linked poly (aryl ether ketone) anion exchange membrane with high ion conductivity by two different functional imidazole side chain, React. Funct. Polym., 151, 10.1016/j.reactfunctpolym.2020.104551
Overton, 2020, Tuning ion exchange capacity in hydroxide-stable poly (arylimidazolium) ionenes: increasing the ionic content decreases the dependence of conductivity and hydration on temperature and humidity, Macromolecules, 53, 10548, 10.1021/acs.macromol.0c02014
Lai, 2020, Comb-shaped cardo poly (arylene ether nitrile sulfone) anion exchange membranes: significant impact of nitrile group content on morphology and properties, RSC Adv., 10, 15375, 10.1039/D0RA01798A
Abouzari-Lotf, 2021, Highly conductive anion exchange membranes based on polymer networks containing imidazolium functionalised side chains, Sci. Rep., 11, 1, 10.1038/s41598-021-83161-9
Tuan, 2020, Anion exchange membranes prepared from quaternized polyepichlorohydrin cross-linked with 1-(3-aminopropyl) imidazole grafted poly (arylene ether ketone) for enhancement of toughness and conductivity, Membranes, 10, 138, 10.3390/membranes10070138
Li, 2022, Imidazole-functionalized multiquaternary side-chain polyethersulfone anion-exchange membrane for fuel cell applications, ACS Appl. Energy Mater., 5, 10023, 10.1021/acsaem.2c01647
Feng, 2016, Imidazolium-based organic–inorganic hybrid anion exchange membranes for fuel cell applications, J. Membr. Sci., 508, 7, 10.1016/j.memsci.2016.02.019