Chemically modified poly(arylene ether ketone)s with pendant imidazolium groups: Anion exchange membranes for alkaline fuel cells

Luu, 2011, Strontium cross-linked sPEEK proton exchange membranes for fuel cell, Solid State Ionics, 192, 627, 10.1016/j.ssi.2010.05.007 Dang, 2012, Cross-linked poly(arylene ether ketone) electrolyte membranes with enhanced proton conduction for fuel cells, Int J Hydrogen Energy, 37, 19007, 10.1016/j.ijhydene.2012.09.152 Shabanikia, 2015, Polybenzimidazole/strontium cerate nanocomposites with enhanced proton conductivity for proton exchange membrane fuel cells operating at high temperature, Electrochim Acta, 154, 370, 10.1016/j.electacta.2014.12.025 Zhou, 2012, Cross-linked aryl-sulfonated poly(arylene ether ketone) proton exchange membranes for fuel cell, Electrochim Acta, 63, 238, 10.1016/j.electacta.2011.12.098 Wu, 2009, Novel silica/poly(2,6-dimethyl-1,4-phenylene oxide) hybrid anion-exchange membranes for alkaline fuel cells: effect of heat treatment, J Membr Sci, 338, 51, 10.1016/j.memsci.2009.04.012 Guo, 2010, Synthesis and characterization of novel anion exchange membranes based on imidazolium-type ionic liquid for alkaline fuel cells, J Membr Sci, 362, 97, 10.1016/j.memsci.2010.06.026 Singhal, 2000, Advances in solid oxide fuel cell technology, Solid State Ionics, 135, 305, 10.1016/S0167-2738(00)00452-5 Plomp, 1992, Improvement of molten-carbonate fuel cell (MCFC) lifetime, J Power Sources, 39, 369, 10.1016/0378-7753(92)80008-Y Sammes, 2004, Phosphoric acid fuel cells: fundamentals and applications, Curr Opin Solid State Mater, 8, 372, 10.1016/j.cossms.2005.01.001 Naughton, 2011, Carbonate resilience of flowing electrolyte-based alkaline fuel cells, J Power Sources, 196, 1762, 10.1016/j.jpowsour.2010.09.114 Zeng, 2010, Anion exchange membranes based on quaternized polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene for direct methanol alkaline fuel cells, J Membr Sci, 349, 237, 10.1016/j.memsci.2009.11.051 Matsumoto, 2011, Very high performance alkali anion-exchange membrane fuel cells, Adv Funct Mater, 21, 1089, 10.1002/adfm.201001806 Zarrin, 2012, High durable PEK-based anion exchange membrane for elevated temperature alkaline fuel cells, J Membr Sci, 394–395, 193, 10.1016/j.memsci.2011.12.041 Jung, 2011, Low fuel crossover anion exchange pore-filling membrane for solid-state alkaline fuel cells, J Membr Sci, 373, 107, 10.1016/j.memsci.2011.02.044 Wang, 2009, Developing a polysulfone-based alkaline anion exchange membrane for improved ionic conductivity, J Membr Sci, 332, 63, 10.1016/j.memsci.2009.01.038 Cao, 2012, The synthesis and characteristic of an anion conductive polymer membrane for alkaline anion exchange fuel cells, J Power Sources, 201, 226, 10.1016/j.jpowsour.2011.10.113 Xu, 2010, Novel anion exchange membrane based on copolymer of methyl methacrylate, vinylbenzyl chloride and ethyl acrylate for alkaline fuel cells, J Membr Sci, 354, 206, 10.1016/j.memsci.2010.02.028 Wu, 2012, A polymethacrylate-based quaternary ammonium OH− ionomer binder for non-precious metal alkaline anion exchange membrane water electrolysers, J Power Sources, 214, 124, 10.1016/j.jpowsour.2012.03.069 Tuan, 2016, Anion-exchange membranes based on poly(arylene ether ketone) with pendant quaternary ammonium groups for alkaline fuel cell application, J Membr Sci, 511, 143, 10.1016/j.memsci.2016.03.059 Proctor, 2004, 712 Chempath, 2008, Mechanism of tetraalkylammonium headgroup degradation in alkaline fuel cell membranes, J Phys Chem C, 112, 3179, 10.1021/jp7115577 Tomoi, 1997, Synthesis and thermal stability of novel anion exchange resins with spacer chains, J Appl Polym Sci, 64, 1161, 10.1002/(SICI)1097-4628(19970509)64:6<1161::AID-APP16>3.0.CO;2-Z Gu, 2011, Self-crosslinking for dimensionally stable and solvent-resistant quaternary phosphonium based hydroxide exchange membranes, Chem Commun, 47, 2856, 10.1039/c0cc04335d Gu, 2009, A soluble and highly conductive ionomer for high-performance hydroxide exchange membrane fuel cells, Angew Chem Int Ed, 48, 6499, 10.1002/anie.200806299 Kong, 2009, Determination of the structure of a novel anion exchange fuel cell membrane by solid-state nuclear magnetic resonance spectroscopy, Macromolecules, 42, 1659, 10.1021/ma802613k Bishop, 1972, The thermodynamics and kinetics of the polymerization of silicic acid in dilute aqueous solution, Thermochim Acta, 3, 399, 10.1016/0040-6031(72)87054-0 Rao, 2013, Imidazolium-functionalized poly(arylene ether sulfone) block copolymer as an anion exchange membrane for alkaline fuel cell, Polymer, 54, 111, 10.1016/j.polymer.2012.11.023 Deavin, 2012, Anion-exchange membranes for alkaline polymer electrolyte fuel cells: comparison of pendent benzyltrimethylammonium- and benzylmethylimidazolium-head-groups, Energy Environ Sci, 5, 8584, 10.1039/c2ee22466f Wang, 2014, Hydroxide-ion induced degradation pathway for dimethylimidazolium groups in anion exchange membranes, J Membr Sci, 462, 112, 10.1016/j.memsci.2014.03.026 Jheng, 2014, Quaternized polybenzimidazoles with imidazolium cation moieties for anion exchange membrane fuel cells, J Membr Sci, 460, 160, 10.1016/j.memsci.2014.02.043 Xiao, 2002, Synthesis and characterization of novel sulfonated poly(arylene ether ketone)s derived from 4,4′-sulfonyldiphenol, Polym Bull, 48, 309, 10.1007/s00289-002-0047-6 Zhong, 2007, Crosslinked sulfonated poly(ether ether ketone) proton exchange membranes for direct methanol fuel cell applications, J Power Sources, 164, 65, 10.1016/j.jpowsour.2006.10.077 Zhao, 2010, Novel cross-linked sulfonated poly (arylene ether ketone) membranes for direct methanol fuel cell, Int J Hydrogen Energy, 35, 2176, 10.1016/j.ijhydene.2009.12.149 Li, 2006, Novel sulfonated poly(arylene ether ketone) containing benzoxazole membranes for proton exchange membrane fuel cell, Macromol Res, 14, 438, 10.1007/BF03219107 Shang, 2007, Synthesis and characterization of poly(arylene ether ketone) with sulfonated fluorene pendants for proton exchange membrane, J Membr Sci, 297, 90, 10.1016/j.memsci.2007.03.014 Xing, 2005, Characterization of sulfonated poly(ether ether ketone)/polytetrafluoroethylene composite membranes for fuel cell applications, Fuel Cells, 5, 406, 10.1002/fuce.200500089 Li, 2010, Crosslinked sulfonated poly(arylene ether ketone) with pendant carboxylic acid group via poly(ethylene glycol) for proton exchange membrane, J Appl Polym Sci, 118, 3318, 10.1002/app.32439 Zhang, 2010, Synthesis and characterization of poly(arylene ether ketone)s bearing pendant sulfonic acid groups for proton exchange membrane materials, J Polym Sci Polym Chem, 48, 5824, 10.1002/pola.24390 Liu, 2013, Novel crosslinked alkaline exchange membranes based on poly(phthalazinone ether ketone) for anion exchange membrane fuel cell applications, J Polym Sci B Polym Phys, 51, 1632 Irfan, 2017, Preparation and performance evaluation of novel alkaline stable anion exchange membranes, J Power Sources, 355, 171, 10.1016/j.jpowsour.2017.03.146 Lan, 2015, Cross-linked anion exchange membranes with pendent quaternary pyrrolidinium salts for alkaline polymer electrolyte membrane fuel cells, J Power Sources, 295, 259, 10.1016/j.jpowsour.2015.07.015 Lu, 2015, Polybenzimidazole-crosslinked poly(vinylbenzyl chloride) with quaternary 1,4-diazabicyclo (2.2.2) octane groups as high performance anion exchange membrane for fuel cells, J Power Sources, 296, 204, 10.1016/j.jpowsour.2015.07.048 Kim, 2017, Poly(arylene ether ketone) with pendant pyridinium groups for alkaline fuel cell membranes, Int J Hydrogen Energy, 42, 12496, 10.1016/j.ijhydene.2017.03.187 Lu, 2013, Preparation and characterization of imidazolium functionalized poly (ether sulfone) as anion exchange membrane and ionomer for fuel cell application, Int J Hydrogen Energy, 38, 9285, 10.1016/j.ijhydene.2013.05.070 Yang, 2015, 1,2-Dimethylimidazolium-functionalized cross-linked alkaline anion exchange membranes for alkaline direct methanol fuel cells, Int J Hydrogen Energy, 40, 2363, 10.1016/j.ijhydene.2014.12.050