Advances and challenges in alkaline anion exchange membrane fuel cells

An, 2011, A bi-functional cathode structure for alkaline-acid direct ethanol fuel cells, Int J Hydrogen Energy, 36, 13089, 10.1016/j.ijhydene.2011.07.025 An, 2011, An alkaline direct oxidation fuel cell with non-platinum catalysts capable of converting glucose to electricity at high power output, J Power Sources, 196, 186, 10.1016/j.jpowsour.2010.05.069 Mamlouk, 2012, Radiation grafted membranes for superior anion exchange polymer membrane fuel cells performance, Int J Hydrogen Energy, 37, 11912, 10.1016/j.ijhydene.2012.05.117 An, 2015, A low-cost, high-performance zinc-hydrogen peroxide fuel cell, J Power Sources, 275, 831, 10.1016/j.jpowsour.2014.11.076 An, 2014, A high-performance ethanol-hydrogen peroxide fuel cell, RSC Adv, 4, 65031, 10.1039/C4RA10196K Varcoe, 2014, Anion-exchange membranes in electrochemical energy systems, Energy Environ Sci, 7, 3135, 10.1039/C4EE01303D An, 2017, Mathematical modeling of direct formate fuel cells, Appl Therm Eng, 124, 232, 10.1016/j.applthermaleng.2017.06.020 Li, 2012, Ultra-low catalyst loading cathode electrode for anion exchange membrane fuel cells, Int J Hydrogen Energy, 37, 15334, 10.1016/j.ijhydene.2012.07.119 Varcoe, 2008, Membrane and electrode materials for alkaline membrane fuel cells, ECS Trans, 16, 1819, 10.1149/1.2982023 Yu, 2012, Direct oxidation alkaline fuel cells: from materials to systems, Energy Environ Sci, 5, 5668, 10.1039/C2EE02552C An, 2014, Modeling of the mixed potential in hydrogen peroxide-based fuel cells, Int J Hydrogen Energy, 39, 7407, 10.1016/j.ijhydene.2014.02.169 Li, 2014, Layer reduction method for fabricating Pd-coated Ni foams as high-performance ethanol electrode for anion-exchange membrane fuel cells, RSC Adv, 4, 16879, 10.1039/c4ra01399a Duan, 2017, Zr and Y co-doped perovskite as a stable, high performance cathode for solid oxide fuel cells operating below 500 °C, Energy Environ Sci, 10, 176, 10.1039/C6EE01915C An, 2014, Performance of an alkaline direct ethanol fuel cell with hydrogen peroxide as oxidant, Int. J. Hydrogen Energy, 39, 2320, 10.1016/j.ijhydene.2013.11.072 An, 2011, Performance of an alkaline-acid direct ethanol fuel cell, Int J Hydrogen Energy, 36, 9994, 10.1016/j.ijhydene.2011.04.150 Zhang, 2012, Direction and management of water movement in solid-state alkaline fuel cells, J Phys Chem C, 116, 7650, 10.1021/jp211084b An, 2013, Agar chemical hydrogel electrode binder for fuel-electrolyte-fed fuel cells, Appl Energy, 109, 67, 10.1016/j.apenergy.2013.03.077 An, 2017, Transport phenomena in direct borohydride fuel cells, Appl Energy, 205, 1270, 10.1016/j.apenergy.2017.08.116 Gunasekara, 2012, Mass transport and oxygen reduction kinetics at an anion exchange membrane interface: microelectrode studies on effect of carbonate exchange, ECS Electrochem Lett, 1, F16, 10.1149/2.007202eel An, 2016, Recent progress in alkaline direct ethylene glycol fuel cells for sustainable energy production, J. Power Sources, 329, 484, 10.1016/j.jpowsour.2016.08.105 An, 2015, The dual role of hydrogen peroxide in fuel cells, Sci Bull, 60, 55, 10.1007/s11434-014-0694-7 Li, 2016, A monolithic carbon foam-supported pd-based catalyst towards ethanol electro-oxidation in alkaline media, J Electrochem Soc, 163, F424, 10.1149/2.1161605jes Hou, 2014, Recent research progress in alkaline polymer electrolyte membranes for alkaline solid fuel cells, Acta Phys -Chim Sin, 30, 1393, 10.3866/PKU.WHXB201406171 An, 2013, An alkaline direct ethylene glycol fuel cell with an alkali-doped polybenzimidazole membrane, Int J Hydrogen Energy, 38, 10602, 10.1016/j.ijhydene.2013.06.042 An, 2011, An alkaline direct ethanol fuel cell with a cation exchange membrane, Energy Environ Sci, 4, 2213, 10.1039/c1ee00002k Merle, 2011, Anion exchange membranes for alkaline fuel cells: a review, J Membrane Sci, 377, 1, 10.1016/j.memsci.2011.04.043 Gülzow, 2004, Long-term operation of AFC electrodes with CO2 containing gases, J Power Sources, 127, 243, 10.1016/j.jpowsour.2003.09.020 McLean, 2002, An assessment of alkaline fuel cell technology, Int J Hydrogen Energy, 27, 507, 10.1016/S0360-3199(01)00181-1 Gouérec, 2004, The evolution of the performance of alkaline fuel cells with circulating electrolyte, J Power Sources, 129, 193, 10.1016/j.jpowsour.2003.11.032 Wang, 2013, Alkaline polymer electrolyte membranes for fuel cell applications, Chem Soc Rev, 42, 5768, 10.1039/c3cs60053j Li, 2011, Cathode flooding behaviour in alkaline direct ethanol fuel cells, J Power Sources, 196, 133, 10.1016/j.jpowsour.2010.06.111 An, 2015, Carbon-neutral sustainable energy technology: direct ethanol fuel cells, Renew Sustain Energy Rev, 50, 1462, 10.1016/j.rser.2015.05.074 An, 2012, Charge carriers in alkaline direct oxidation fuel cells, Energy Environ Sci, 5, 7536, 10.1039/c2ee21734a An, 2017, Transport phenomena in alkaline direct ethanol fuel cells for sustainable energy production, J Power Sources, 341, 199, 10.1016/j.jpowsour.2016.11.117 Yang, 2014, Effect of gas diffusion electrode parameters on anion exchange membrane fuel cell performance, Chin J Catal, 35, 1091, 10.1016/S1872-2067(14)60050-4 Li, 2013, Performance characteristics of air-breathing anion-exchange membrane direct ethanol fuel cells, Int J Hydrogen Energy, 38, 13427, 10.1016/j.ijhydene.2013.07.042 An, 2012, Comparison of different types of membrane in alkaline direct ethanol fuel cells, Int J Hydrogen Energy, 37, 14536, 10.1016/j.ijhydene.2012.06.105 An, 2016, Direct formate fuel cells: a review, J Power Sources, 320, 127, 10.1016/j.jpowsour.2016.04.082 Follain, 2012, Water transport properties of plasma-modified commercial anion-exchange membrane for solid alkaline fuel cells, J Phys Chem C, 116, 8510, 10.1021/jp2109835 Li, 2016, A liquid-electrolyte-free anion-exchange membrane direct formate-peroxide fuel cell, Int J Hydrogen Energy, 41, 3600, 10.1016/j.ijhydene.2015.12.178 Li, 2012, Understanding the performance degradation of anion-exchange membrane direct ethanol fuel cells, Int J Hydrogen Energy, 37, 4413, 10.1016/j.ijhydene.2011.11.086 Kabir, 2017, Platinum group metal-free NiMo hydrogen oxidation catalysts: high performance and durability in alkaline exchange membrane fuel cells, J Mater Chem A, 5, 24433, 10.1039/C7TA08718G Holby, 2016, Linking structure to function: the search for active sites in non-platinum group metal oxygen reduction reaction catalysts, Nano Energy, 29, 54, 10.1016/j.nanoen.2016.05.025 Li, 2015, Performance of direct formate-peroxide fuel cells, J Power Sources, 287, 75, 10.1016/j.jpowsour.2015.04.014 Li, 2009, Performance of alkaline electrolyte-membrane-based direct ethanol fuel cells, J Power Sources, 187, 387, 10.1016/j.jpowsour.2008.10.132 Pan, 2017, Alkaline anion exchange membrane fuel cells for cogeneration of electricity and valuable chemicals, J Power Sources, 365, 430, 10.1016/j.jpowsour.2017.09.013 Li, 2017, A sodium-ion-conducting direct formate fuel cell: generating electricity and producing base, Angew Chem, 129, 5828, 10.1002/ange.201701816 Li, 2017, Hydroxide self-feeding high-temperature alkaline direct formate fuel cells, ChemSusChem, 10, 2135, 10.1002/cssc.201700228 Chen, 2017, From structures, packaging to application: a system-level review for micro direct methanol fuel cell, Renew Sustain Energy Rev, 80, 669, 10.1016/j.rser.2017.05.272 Li, 2016, A passive anion-exchange membrane direct ethanol fuel cell stack and its applications, Int J Hydrogen Energy, 41, 20336, 10.1016/j.ijhydene.2016.08.180 Li, 2015, A high-performance direct formate-peroxide fuel cell with palladium-gold alloy coated foam electrodes, J Power Sources, 278, 569, 10.1016/j.jpowsour.2014.12.064 Zakaria, 2016, Membranes for direct ethanol fuel cells: an overview, Appl Energy, 163, 334, 10.1016/j.apenergy.2015.10.124 Bakosa, 2015, Pd/Ni synergestic activity for hydrogen oxidation reaction in alkaline conditions, Electrochim Acta, 176, 1074, 10.1016/j.electacta.2015.07.109 Lu, 2008, Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts, Proc Natl Acad Sci, 105, 20611, 10.1073/pnas.0810041106 Vinodh, 2012, Carbon supported silver (Ag/C) electrocatalysts for alkaline membrane fuel cells, J Mater Sci, 47, 852, 10.1007/s10853-011-5863-3 Mamlouk, 2011, Electrochemical and fuel cell evaluation of Co based catalyst for oxygen reduction in anion exchange polymer membrane fuel cells, J Power Sources, 196, 7594, 10.1016/j.jpowsour.2011.04.045 Ogihara, 2017, In situ FTIR analysis of co-tolerance of a Pt–Fe alloy with stabilized Pt skin layers as a hydrogen anode catalyst for polymer electrolyte fuel cells, Catalysts, 7, 8, 10.3390/catal7010008 Fu, 2010, Alkali doped poly(vinyl alcohol) for potential fuel cell applications, Synth Met, 160, 193, 10.1016/j.synthmet.2009.11.013 Tanaka, 2011, Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells, J Am Chem Soc, 133, 10646, 10.1021/ja204166e Yan, 2017, Anion exchange membranes by bromination of tetramethylbiphenol-based poly(sulfone)s, Polym Chem, 8, 2442, 10.1039/C7PY00026J Wang, 2011, A polytetrafluoroethylene-quaternary 1,4-diazabicyclo- [2.2.2]-octane polysulfone composite membrane for alkaline anion exchange membrane fuel cells, Int J Hydrogen Energy, 36, 10022, 10.1016/j.ijhydene.2011.05.054 Li, 2014, Cross-linked multiblock copoly(arylene ether sulfone) ionomer/nano-ZrO2 composite anion exchange membranes for alkaline fuel cells, RSC Adv, 4, 41398, 10.1039/C4RA06519K Cha, 2017, Preparation and characterization of crosslinked anion exchange membrane (AAEM) materials with poly(phenylene ether)-based short hydrophilic block for use in electrochemical applications, J Membrane Sci, 530, 10.1016/j.memsci.2017.02.015 Li, 2016, An all-in-one electrode for high-performance liquid-feed micro polymer electrolyte membrane fuel cells, J Electrochem Soc, 163, F663, 10.1149/2.0861607jes Sheng, 2010, Hydrogen oxidation and evolution reaction kinetics on platinum: acid vs alkaline electrolytes, J Electrochem Soc, 157, B1529, 10.1149/1.3483106 Durst, 2014, New insights into the electrochemical hydrogen oxidation and evolution reaction mechanism, Energy Environ Sci, 7, 2255, 10.1039/C4EE00440J Sheng, 2015, Correlating hydrogen oxidation and evolution activity on platinum at different pH with measured hydrogen binding energy, Nat Commun, 6, 5848, 10.1038/ncomms6848 Ledezma-Yanez, 2017, Interfacial water reorganization as a pH-dependent descriptor of the hydrogen evolution rate on platinum electrodes, Nat Energy, 2, 17031, 10.1038/nenergy.2017.31 Alesker, 2016, Palladium/nickel bifunctional electrocatalyst for hydrogen oxidation reaction in alkaline membrane fuel cell, J Power Sources, 304, 332, 10.1016/j.jpowsour.2015.11.026 Ohyama, 2013, High performance of Ru nanoparticles supported on carbon for anode electrocatalyst of alkaline anion exchange membrane fuel cell, J Power Sources, 225, 311, 10.1016/j.jpowsour.2012.10.051 Lu, 2008, Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts, Proc Natl Acad Sci, 105, 20611, 10.1073/pnas.0810041106 Lu, 2016, Electrocatalysts for hydrogen oxidation and evolution reactions, Sci China Mater, 59, 217, 10.1007/s40843-016-0127-9 Miller, 2016, A Pd/C-CeO2 anode catalyst for high-performance platinum-free anion exchange membrane fuel cells, Angew Chem Int Ed, 55, 6004, 10.1002/anie.201600647 Hu, 2013, Alkaline polymer electrolyte fuel cell with Ni-based anode and Co-based cathode, Int J Hydrogen Energy, 38, 16264, 10.1016/j.ijhydene.2013.09.125 Sheng, 2014, Non-precious metal electrocatalysts with high activity for hydrogen oxidation reaction in alkaline electrolytes, Energy Environ Sci, 7, 1719, 10.1039/C3EE43899F Zhuang, 2016, Nickel supported on nitrogen-doped carbon nanotubes as hydrogen oxidation reaction catalyst in alkaline electrolyte, Nat Commun, 7, 10141, 10.1038/ncomms10141 Alia, 2013, Platinum-coated copper nanowires with high activity for hydrogen oxidation reaction in base, J Am Chem Soc, 135, 13473, 10.1021/ja405598a Maiorova, 2006, Thin-film rotating disk electrode as a tool for comparing the activity of catalysts in the hydrogen oxidation reaction, Russ J Electrochem, 42, 331, 10.1134/S1023193506040082 Gabrielli, 2004, Investigation of hydrogen adsorption and absorption in palladium thin films II. Cyclic voltammetry, J Electrochem Soc, 151, A1937, 10.1149/1.1797035 Bartlett, 2002, The preparation and characterisation of H1-e palladium films with a regular hexagonal nanostructure formed by electrochemical deposition from lyotropic liquid crystalline phases, Phys Chem Chem Phys, 4, 3835, 10.1039/b201845d Rau, 2008, Hydrogen oxidation reaction: evidences of different electrocatalytic activity between α and β Pd-H, Electrochem Commun, 10, 208, 10.1016/j.elecom.2007.11.031 Feng, 2014, Fast vacancy-mediated oxygen ion incorporation across the ceria-gas electrochemical interface, Nat Commun, 5, 4374, 10.1038/ncomms5374 Skála, 2009, Palladium interaction with CeO2, Sn-Ce-O and Ga-Ce-O layers, J Phys Condens Matter, 21, 10.1088/0953-8984/21/5/055005 Miller, 2017, Highly active nanostructured palladium-ceria electrocatalysts for the hydrogen oxidation reaction in alkaline medium, Nano Energy, 33, 293, 10.1016/j.nanoen.2017.01.051 Anastasijevic, 1987, Determination of the kinetic parameters of the oxygen reduction reaction using the rotating ring-disk electrode, J Electroanal Chem, 229, 305, 10.1016/0022-0728(87)85148-3 He, 2015, Review-recent progress in electrocatalysts for oxygen reduction suitable for alkaline anion exchange membrane fuel cells, J Electrochem Soc, 162, F1504, 10.1149/2.0551514jes Varcoe, 2006, Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes, J Phys Chem B, 110, 21041, 10.1021/jp064898b Dai, 2015, Metal-free catalysts for oxygen reduction reaction, Chem Rev, 115, 4823, 10.1021/cr5003563 Poynton, 2010, Novel electrolyte membranes and non-Pt catalysts for low temperature fuel cells, Solid State Ion, 181, 219, 10.1016/j.ssi.2009.01.019 Maheswari, 2010, Oxygen reduction catalysts for alkaline polymer electrolyte fuel cells, ECS Trans, 33, 1795, 10.1149/1.3484669 Maheswari, 2012, Carbon-supported Pd–Co as cathode catalyst for APEMFCs and validation by DFT, Phys Chem Chem Phys, 14, 9683, 10.1039/c2cp40655a Zhang, 2014, Simple synthesis of bimetallic alloyed Pd–Au nanochain networks supported on reduced graphene oxide for enhanced oxygen reduction reaction, Rsc Adv, 4, 52640, 10.1039/C4RA10746B Fu, 2014, Synthesis and electrocatalytic activity of Au@Pd core-shell nanothorns for the oxygen reduction reaction, Nano Res, 7, 1205, 10.1007/s12274-014-0483-2 Kruusenberg, 2012, Non-platinum cathode catalysts for alkaline membrane fuel cells, Int J Hydrogen Energy, 37, 4406, 10.1016/j.ijhydene.2011.11.143 Li, 2011, Non-precious metal catalysts synthesized from precursors of carbon, nitrogen, and transition metal for oxygen reduction in alkaline fuel cells, J Power Sources, 196, 1717, 10.1016/j.jpowsour.2010.10.018 Song, 2015, Cheap carbon black-based high-performance electrocatalysts for oxygen reduction reaction, Chem Commun, 51, 1972, 10.1039/C4CC07677J He, 2013, High-loading cobalt oxide coupled with nitrogen-doped graphene for oxygen reduction in anion-exchange-membrane alkaline fuel cells, J Phys Chem C, 117, 8697, 10.1021/jp401814f Suntivich, 2011, Design principles for oxygen-reduction activity on perovskite oxide catalysts for fuel cells and metal–air batteries, Nat Chem, 3, 546, 10.1038/nchem.1069 Sunarso, 2012, Oxygen reduction reaction activity of la-based perovskite oxides in alkaline medium: a thin-film rotating ring-disk electrode study, J Phys Chem C, 116, 5827, 10.1021/jp211946n Jin, 2013, Preparation and electrochemical properties of urchin-like La0.8Sr0.2MnO3 perovskite oxide as a bifunctional catalyst for oxygen reduction and oxygen evolution reaction, J Power Sources, 241, 225, 10.1016/j.jpowsour.2013.04.116 Stoerzinger, 2013, Oxygen electrocatalysis on (001)-oriented manganese perovskite films: Mn valency and charge transfer at the nanoscale, Energy Environ Sci, 6, 1582, 10.1039/c3ee40321a Risch, 2014, La0.8Sr0.2MnO3-δ decorated with Ba0.5Sr0.5Co0.8Fe0.2O3-δ: a bifunctional surface for oxygen electrocatalysis with enhanced stability and activity, J Am Chem Soc, 136, 5229, 10.1021/ja5009954 Pendashteh, 2017, NiCoMnO4 nanoparticles on N-doped graphene: highly efficient bifunctional electrocatalyst for oxygen reduction/evolution reactions, Appl Catal B, 201, 241, 10.1016/j.apcatb.2016.08.044 Gupta, 2016, Bifunctional perovskite oxide catalysts for oxygen reduction and evolution in alkaline media, Chem Asian J, 11, 10, 10.1002/asia.201500640 Nie, 2015, Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction, Chem Soc Rev, 44, 2168, 10.1039/C4CS00484A Zhang, 2017, A rational design for enhanced oxygen reduction: strongly coupled silver nanoparticles and engineered perovskite nanofibers, Nano Energy, 38, 392, 10.1016/j.nanoen.2017.06.006 Higgins, 2010, Nitrogen doped carbon nanotube thin films as efficient oxygen reduction catalyst for alkaline anion exchange membrane fuel cell, ECS Trans, 28, 63, 10.1149/1.3502338 Rao, 2012, Activity, selectivity, and anion-exchange membrane fuel cell performance of virtually metal-free nitrogen-doped carbon nanotube electrodes for oxygen reduction reaction, J Phys Chem C, 116, 4340, 10.1021/jp210840a Ding, 2013, Space-confinement-induced synthesis of pyridinic- and pyrrolic-nitrogen-doped graphene for the catalysis of oxygen reduction, Angew Chem Int Ed, 52, 11755, 10.1002/anie.201303924 Shui, 2015, N-doped carbon nanomaterials are durable catalysts for oxygen reduction reaction in acidic fuel cells, Sci Adv, 1, 10.1126/sciadv.1400129 Xu, 2012, Sustainable nitrogen-doped porous carbon with high surface areas prepared from gelatin for supercapacitors, J Mater Chem, 22, 19088, 10.1039/c2jm32759g Liang, 2015, Bacterial cellulose derived nitrogen-doped carbon nanofiber aerogel: an efficient metal-free oxygen reduction electrocatalyst for zinc-air battery, Nano Energy, 11, 366, 10.1016/j.nanoen.2014.11.008 Lu, 2013, Facile preparation of nitrogen-doped reduced graphene oxide as a metal-free catalyst for oxygen reduction reaction, J Mater Sci, 48, 8101, 10.1007/s10853-013-7622-0 Merle, 2012, New cross-linked PVA based polymer electrolyte membranes for alkaline fuel cells, J Membrane Sci, 409-410, 191, 10.1016/j.memsci.2012.03.056 Zhang, 2013, Hydroxyl anion conducting membranes poly(vinyl alcohol)/poly(diallyldimethylammonium chloride) for alkaline fuel cellapplications: effect of molecular weight, Electrochim Acta, 111, 351, 10.1016/j.electacta.2013.07.182 Jasti, 2014, A facile synthesis of highly stable multiblock poly(arylene ether)s based alkaline membranes for fuel cells, J Power Sources, 267, 714, 10.1016/j.jpowsour.2014.05.129 Li, 2014, Anion exchange membranes by bromination of benzylmethyl-containing poly(arylene ether)s for alkaline membrane fuel cells, RSC Adv, 4, 29682, 10.1039/C4RA00833B Li, 2010, Measurements of water uptake and transport properties in anion-exchange membranes, Int J Hydrogen Energy, 35, 5656, 10.1016/j.ijhydene.2010.03.026 Qiao, 2012, Synthesis and properties of chemically cross-linked poly(vinyl alcohol)–poly(acrylamide-co-diallyldimethylammonium chloride) (PVA–PAADDA) for anion-exchange membranes, Solid State Ion, 214, 6, 10.1016/j.ssi.2012.02.059 Qiao, 2013, Anion conducting poly(vinyl alcohol)/poly(diallyldimethylammonium chloride) membranes with high durable alkaline stability for polymer electrolyte membrane fuel cells, J Power Sources, 237, 1, 10.1016/j.jpowsour.2013.02.059 Zhang, 2013, Cross-linked poly(vinyl alcohol)/poly (diallyldimethylammonium chloride) as anion-exchange membrane for fuel cell applications, J Power Sources, 240, 359, 10.1016/j.jpowsour.2013.03.162 Lu, 2014, Crosslinked poly(vinylbenzyl chloride) with a macromolecular crosslinker for anion exchange membrane fuel cells, J Power Sources, 248, 905, 10.1016/j.jpowsour.2013.08.141 Tanaka, 2011, Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells, J Am Chem Soc, 133, 10646, 10.1021/ja204166e Ong, 2011, Anionic membrane and ionomer based on poly(2,6-dimethyl-1,4-phenylene oxide) for alkaline membrane fuel cells, J Power Sources, 196, 8272, 10.1016/j.jpowsour.2011.06.015 Lin, 2012, Alkali resistant and conductive guanidinium-based anion-exchange membranes for alkaline polymer electrolyte fuel cells, J Power Sources, 217, 373, 10.1016/j.jpowsour.2012.05.062 Lin, 2013, Novel alkaline anion exchange membranes containing pendant benzimidazolium groups for alkaline fuel cells, J Membrane Sci, 443, 193, 10.1016/j.memsci.2013.04.059 Lin, 2013, Alkaline polymer electrolytes containing pendant dimethylimidazolium groups for alkaline membrane fuel cells, J Mater Chem A, 1, 7262, 10.1039/c3ta10308k Li, 2013, Towards high conductivity in anion-exchange membranes for alkaline fuel cells, ChemSusChem, 6, 1376, 10.1002/cssc.201300320 Dang, 2017, A comparative study of anion-exchange membranes tethered with different hetero-cycloaliphatic quaternary ammonium hydroxides, J Mater Chem A, 5, 21965, 10.1039/C7TA06029G Wang, 2017, A mechanically strong and tough anion exchange membrane engineered with non-covalent modalities, Chem Commun, 53, 12369, 10.1039/C7CC07284H Benipal, 2017, Direct glycerol fuel cell with polytetrafluoroethylene (PTFE) thin film separator, Renew Energy, 105, 647, 10.1016/j.renene.2016.12.028 Zhao, 2013, High-performance alkaline fuel cells using crosslinked composite anion exchange membrane, J Power Sources, 221, 247, 10.1016/j.jpowsour.2012.08.053 Zhao, 2013, Quaternary ammonia polysulfone-PTFE composite alkaline anion exchange membrane for fuel cells application, Int J Hydrogen Energy, 38, 1983, 10.1016/j.ijhydene.2012.11.055 Li, 2013, Ultrathin composite membrane of alkaline polymer electrolyte for fuel cell applications, J Mater Chem A, 1, 12497, 10.1039/c3ta12626a Zhou, 2009, Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cells, J Power Sources, 190, 285, 10.1016/j.jpowsour.2008.12.127 Yang, 2014, A stable anion exchange membrane based on imidazolium salt for alkaline fuel cell, J Membrane Sci, 467, 48, 10.1016/j.memsci.2014.05.017 Li, 2014, Cross-linked multiblock copoly(arylene ether sulfone) ionomer/nano-ZrO2 composite anion exchange membranes for alkaline fuel cells, RSC Adv, 4, 41398, 10.1039/C4RA06519K Zhang, 2011, Alkaline anion-exchange polymer membrane with grid-plug microstructure for hydrogen fuel cell application, J Power Sources, 196, 5494, 10.1016/j.jpowsour.2010.12.110 He, 2014, Facilitating hydroxide transport in anion exchange membranes via hydrophilic grafts, J Mater Chem A, 2, 16489, 10.1039/C4TA02942A Vinodh, 2011, Novel quaternized polysulfone/ZrO2 composite membranes for solid alkaline fuel cell applications, Int J Hydrogen Energy, 36, 7291, 10.1016/j.ijhydene.2011.03.056 Varcoe, 2006, An alkaline polymer electrochemical interface: a breakthrough in application of alkaline anion-exchange membranes in fuel cells, Chem Commun, 13, 1428, 10.1039/b600838k Pan, 2010, Self-crosslinked alkaline polymer electrolyte exceptionally stable at 90 °C, Chem Commun, 46, 8597, 10.1039/c0cc03618h Zhou, 2012, Impacts of anion-exchange-membranes with various ionic exchange capacities on the performance of H2/O2 fuel cells, J Power Sources, 219, 272, 10.1016/j.jpowsour.2012.07.051 Li, 2013, Highly stable, anion conductive, comb-shaped copolymers for alkaline fuel cells, J Am Chem Soc, 135, 10124, 10.1021/ja403671u Ren, 2014, Highly conductive anion exchange membrane for high power density fuel-cell performance, ACS Appl Mater Interfaces, 6, 13330, 10.1021/am503870g Lu, 2013, Preparation and characterization of imidazoliumfunctionalized poly (ether sulfone) as anion exchange membrane and ionomer for fuel cell application, Int J Hydrogen Energy, 38, 9285, 10.1016/j.ijhydene.2013.05.070 Zhang, 2011, Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application, J Mater Chem, 21, 12744, 10.1039/c1jm10656b Ran, 2012, Development of imidazolium-type alkaline anion exchange membranes for fuel cell application, J Membrane Sci, 415-416, 242, 10.1016/j.memsci.2012.05.006 Xing, 2000, Hydrogenroxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI), Electrochem Commun, 2, 697, 10.1016/S1388-2481(00)00107-7 Li, 2018, A highly durable long side-chain polybenzimidazole anion exchange membrane for AEMFC, J Membrane Sci, 546, 15, 10.1016/j.memsci.2017.09.064 Wan, 2005, New solid polymer electrolyte membranes for alkaline fuel cells, Polym. Int, 54, 5, 10.1002/pi.1717 Wan, 2006, Preliminary evaluation of an alkaline chitosan-based membrane fuel cell, J Power Sources, 162, 105, 10.1016/j.jpowsour.2006.07.027 Luo, 2010, Quaternized poly(methyl methacrylate-co-butyl acrylate-co-vinylbenzyl chloride) membrane for alkaline fuel cells, J Power Sources, 195, 3765, 10.1016/j.jpowsour.2009.12.106 Luo, 2011, An acrylate-polymer-based electrolyte membrane for alkaline fuel cell applications, ChemSusChem, 4, 1557, 10.1002/cssc.201100287 Luo, 2010, High molecular weight copolymer alkaline fuel cell membrane via miniemulsion polymerization, ECS Trans, 33, 1893, 10.1149/1.3484681 Luo YT, Guo JC, Wang CS, Chu D. Tunable high-molecular-weight anion-exchange membranes for alkaline fuel cells, Macromol Chem Phys 212 (20110) 2094–2102. Wu, 2006, Preparation and characterization of high ionic conducting alkaline non-woven membranes by sulfonation, J Membrane Sci, 284, 120, 10.1016/j.memsci.2006.07.025 Sollogouba, 2009, Formation and characterization of crosslinked membranes for alkaline fuel cells, J Membrane Sci, 335, 37, 10.1016/j.memsci.2009.02.027 Hibino, 2012, Hydroxide ion conducting antimony(v)-doped tin pyrophosphate electrolyte for intermediate-temperature alkaline fuel cells, Angew Chem Int Ed, 51, 10786, 10.1002/anie.201205022 Hibino, 2013, An intermediate-temperature alkaline fuel cell using an Sn0.92Sb0.08P2O7-based hydroxide-ion-conducting electrolyte and electrodes, J Mater Chem A, 1, 1134, 10.1039/C2TA00368F Zhao, 2014, High durability and hydroxide ion conducting pore-filled anion exchange membranes for alkaline fuel cell applications, J Power Sources, 269, 1, 10.1016/j.jpowsour.2014.06.026 Kim, 2013, Resonance stabilized perfluorinated ionomers for alkaline membrane fuel cells, Macromolecules, 46, 7826, 10.1021/ma401568f Chen, 2017, A new method for improving the conductivity of alkaline membrane by incorporating TiO2- ionic liquid composite particles, Electrochim Acta, 255, 335, 10.1016/j.electacta.2017.07.176 Einsla, 2007, Stability of cations for anion exchange membrane fuel cells, ECS Trans, 11, 1173, 10.1149/1.2781031 Arges, 2012, Assessing the influence of different cation chemistries on ionic conductivity and alkaline stability of anion exchange membranes, J Mater Chem, 22, 3733, 10.1039/c2jm14898f Park, 2008, Performance of solid alkaline fuel cells employing anion-exchange membranes, J Power Sources, 178, 620, 10.1016/j.jpowsour.2007.08.043 Wang, 2010, Developing a novel alkaline anion exchange membrane derived from poly(ether-imide) for improved ionic conductivity, Polym Adv Technol, 21, 554, 10.1002/pat.1463 Luo, 2012, Copolymerization of methyl methacrylate and vinylbenzyl chloride towards alkaline anion exchange membrane for fuel cell applications, J Membrane Sci, 423-424, 209, 10.1016/j.memsci.2012.08.016 Pan, 2012, Designing advanced alkaline polymer electrolytes for fuel cell applications, Acc Chem Res, 45, 473, 10.1021/ar200201x Li, 2011, Novel anion exchange membranes based on polymerizable imidazolium salt for alkaline fuel cell applications, J Mater Chem, 21, 11340, 10.1039/c1jm11093d Mamlouk, 2012, Effect of anion functional groups on the conductivity and performance of anion exchange polymer membrane fuel cells, J Power Sources, 211, 140, 10.1016/j.jpowsour.2012.03.100 Jiang, 2011, An air-breathing H2/air cell design suitable for fast screening of electrolytes, Electrochim Acta, 56, 8365, 10.1016/j.electacta.2011.07.025 Yan, 2010, Anion exchange membranes by bromination of benzylmethyl-containing poly(sulfone)s, Macromolecules, 43, 2349, 10.1021/ma902430y Zhou, 2009, Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cells, J Power Sources, 190, 285, 10.1016/j.jpowsour.2008.12.127 Fukuta, 2009, In-situ observation of CO2 through the self-purging in alkaline membrane fuel cell (AMFC), ECS Trans, 19, 23, 10.1149/1.3271358 Vega, 2010, Effect of carbonate on anion exchange membrane conductivity and hydrogen oxidation for AAEMFCs, ECS Trans, 28, 103, 10.1149/1.3496025 Vega, 2010, Effect of carbonate on oxygen reduction, hydrogen oxidation and anion exchange membrane chemical stability, ECS Trans, 33, 1735, 10.1149/1.3484663 Vega, 2010, Effect of CO2, HCO3- and CO3-2 on oxygen reduction in anion exchange membrane fuel cells, Electrochim Acta, 55, 1638, 10.1016/j.electacta.2009.10.041 Vega, 2010, Effect of hydroxide and carbonate alkaline media on anion exchange membranes, J. Power Sources, 195, 7176, 10.1016/j.jpowsour.2010.05.030 Inaba, 2011, Effects of carbon dioxide on the performance of anion-exchange membrane fuel cells, Electrochemistry, 79, 322, 10.5796/electrochemistry.79.322 Matsui, 2010, Influence of carbon dioxide on the performance of anion-exchange membrane fuel cells, ECS Trans, 25, 105, 10.1149/1.3315177 Suzuki, 2013, Influence of CO2 dissolution into anion exchange membrane on fuel cell performance, Electrochim Acta, 88, 552, 10.1016/j.electacta.2012.10.105 Gubler, 2014, Polymer design strategies for radiation-grafted fuel cell membranes, Adv Energy Mater, 4, 10.1002/aenm.201300827 Nasef, 2014, Radiation-grafted membranes for polymer electrolyte fuel cells: current trends and future directions, Chem Rev, 114, 12278, 10.1021/cr4005499 Varcoe, 2006, An electron-beam-grafted ETFE alkaline anion-exchange membrane in metal-cation-free solid-state alkaline fuel cells, Electrochem Commun, 8, 839, 10.1016/j.elecom.2006.03.027 Poynton, 2010, Novel electrolyte membranes and non-Pt catalysts for low temperature fuel cells, Solid State Ion, 181, 219, 10.1016/j.ssi.2009.01.019 Nikolic, 2011, Performance comparison of modified poly(vinyl alcohol) based membranes in alkaline fuel cells, Int J Hydrogen Energy, 36, 11004, 10.1016/j.ijhydene.2011.05.164 Deavin, 2012, Anion-exchange membranes for alkaline polymer electrolyte fuel cells: comparison of pendent benzyltrimethylammonium- and benzylmethylimidazolium-head-groups, Energy Environ Sci, 5, 8584, 10.1039/c2ee22466f Fang, 2012, Cross-linked, ETFE-derived and radiation grafted membranes for anion exchange membrane fuel cell applications, Int J Hydrogen Energy, 37, 594, 10.1016/j.ijhydene.2011.09.112 Wang, 2017, An optimised synthesis of high performance radiation-grafted anion-exchange membranes, Green Chem, 19, 831, 10.1039/C6GC02526A Wang, 2017, Non-fluorinated pre-irradiation-grafted (peroxidated) LDPE-based anion-exchange membranes with high performance and stability, Energy Environ Sci, 10, 2154, 10.1039/C7EE02053H Sun, 2012, Novel nanostructured high-performance anion exchange ionomers for anion exchange membrane fuel cells, J Power Sources, 202, 70, 10.1016/j.jpowsour.2011.11.023 Matsumoto, 2011, Very high performance alkali anion-exchange membrane fuel cells, Adv Funct Mater, 21, 1089, 10.1002/adfm.201001806 Yang, 2014, Fine microstructure of high performance electrode in alkaline anion exchange membrane fuel cells, J Power Sources, 267, 39, 10.1016/j.jpowsour.2014.04.053 Ewing, 2010, Synthesis of dendritic nano-sized nickel for use as anodematerial in an alkaline membrane fuel cell, Fuel Cells, 10, 72 Kucernak, 2012, Membrane electrode assemblies based on porous silver electrodes for alkaline anion exchange membrane fuel cells, Electrochim Acta, 82, 284, 10.1016/j.electacta.2012.03.027 Ünlü, 2010, Characterization of anion exchange ionomers in hybrid polymer electrolyte fuel cells, ChemSusChem, 3, 1398, 10.1002/cssc.201000239 Gu, 2013, An efficient Ag-ionomer interface for hydroxide exchange membrane fuel cells, Chem Commun, 49, 131, 10.1039/C2CC34862D Ünlü, 2011, Improved gas diffusion electrodes for hybrid polymer electrolyte fuel cells, Electrochim Acta, 56, 4439, 10.1016/j.electacta.2011.02.017 Zhou, 2011, Solvent processible, high-performance partially fluorinated copoly(arylene ether) alkaline ionomers for alkaline electrodes, J Power Sources, 196, 7924, 10.1016/j.jpowsour.2011.05.024 Kubo, 2013, Improvement of electrochemical performance in alkaline fuel cell by hydroxide ion conducting Ni–Al layered double hydroxide, J Power Sources, 222, 493, 10.1016/j.jpowsour.2012.08.093 Tamain, 2007, Development of cathode architectures customized for H2/O2 metal-cation-free alkaline membrane fuel cells, J Phys Chem C, 111, 18423, 10.1021/jp076740c Mamlouk, 2011, The effect of electrode parameters on the performance of anion exchange polymer membrane fuel cells, Int J Hydrogen Energy, 36, 7191, 10.1016/j.ijhydene.2011.03.074 Oshiba, 2017, Improvement in the solid-state alkaline fuel cell performance through efficient water management strategies, J Power Sources, 345, 221, 10.1016/j.jpowsour.2017.01.111 Omasta, 2018, Importance of balancing membrane and electrode water in anion exchange membrane fuel cells, J Power Sources, 375, 205, 10.1016/j.jpowsour.2017.05.006 Slade, 2012 Luo, 2012, Fuel cell durability enhancement by crosslinking alkaline anion exchange membrane electrolyte, Electrochem Commun, 16, 65, 10.1016/j.elecom.2012.01.005 Fujimoto, 2012, Backbone stability of quaternized polyaromatics for alkaline membrane fuel cells, J Membrane Sci, 423-424, 438, 10.1016/j.memsci.2012.08.045 Carmo, 2013, Development and electrochemical studies of membrane electrode assemblies for polymer electrolyte alkaline fuel cells using FAA membrane and ionomer, J Power Sources, 230, 169, 10.1016/j.jpowsour.2012.12.015 Wang, 2014, Pt–Ru catalyzed hydrogen oxidation in alkaline media: oxophilic effect or electronic effect?, Energy Environ Sci, 8, 177, 10.1039/C4EE02564D Ünlü, 2010, Hybrid polymer electrolyte fuel cells: alkaline electrodes with proton conducting membrane, Angew Chem Int Ed, 49, 1299, 10.1002/anie.200906021 Shen, 2010, Non-flooding hybrid polymer fuel cell, ECS Trans, 33, 2011, 10.1149/1.3484692 Zhang, 2011, Maximum equivalent power output and performance optimization analysis of an alkaline fuel cell/heat-driven cycle hybrid system, J Power Sources, 196, 10088, 10.1016/j.jpowsour.2011.08.001 Ünlü, 2009, Hybrid anion and proton exchange membrane fuel cells, J Phys Chem C, 113, 11416, 10.1021/jp903252u Ünlü, 2010, Self-humidifying hybrid anion-cation membrane fuel cell operated under dry conditions, Fuel Cells, 10, 54 Fukuta, 2010, Improved maximum power density of alkaline membrane fuel cells (AMFCs) by the optimization of mea construction, ECS Trans, 28, 221, 10.1149/1.3505474 Ng, 2013, A precious-metal-free regenerative fuel cell for storing renewable electricity, Adv Energy Mater, 3, 1545, 10.1002/aenm.201300492 Ng, 2014, A carbon-free, precious-metal-free, high performance O2 electrode for regenerative fuel cells and metal-air batteries, Energy Environ Sci, 7, 2017, 10.1039/c3ee44059a Wu, 2012, A non-precious metal bifunctional oxygen electrode for alkaline anion exchange membrane cells, J Power Sources, 206, 14, 10.1016/j.jpowsour.2011.12.052 Matsushima, 2013, Three-phase interfacial phenomena in alkaline unitized regenerative fuel cell, Electrochim Acta, 114, 509, 10.1016/j.electacta.2013.10.121 Grew, 2010, A dusty fluid model for predicting hydroxyl anion conductivity in alkaline anion exchange membranes, J Electrochem Soc, 157, B327, 10.1149/1.3273200 Siroma, 2011, Mathematical modeling of the concentration profile of carbonate ions in an anion exchange membrane fuel cell, J Electrochem Soc, 158, B682, 10.1149/1.3576120 Jiao, 2014, Three-dimensional multiphase modeling of alkaline anion exchange membrane fuel cell, Int J Hydrogen Energy, 39, 5981, 10.1016/j.ijhydene.2014.01.180 Deng, 2014, An analytical model for alkaline membrane direct methanol fuel cell, Int J Heat Mass Transf, 74, 376, 10.1016/j.ijheatmasstransfer.2014.03.035 Feng, 2014, Fast vacancy-mediated oxygen ion incorporation across the ceria-gas electrochemical interface, Nat Commun, 5, 4374, 10.1038/ncomms5374 Deng, 2016, Modeling of hydrogen alkaline membrane fuel cell with interfacial effect and water management optimization, Renew Energy, 91, 166, 10.1016/j.renene.2016.01.054 Huo, 2012, Water management in alkaline anion exchange membrane fuel cell anode, Int J Hydrogen Energy, 37, 18389, 10.1016/j.ijhydene.2012.09.074 Shiau, 2015, Water management in an alkaline-exchange-membrane fuel cell, ECS Trans, 69, 985, 10.1149/06917.0985ecst Deng, 2016, Effect of electrode design and operating condition on performance of hydrogen alkaline membrane fuel cell, Appl Energy, 183, 1272, 10.1016/j.apenergy.2016.09.091 Huo, 2017, Analytical modeling of liquid saturation jump effect for hydrogen alkaline anion exchange membrane fuel cell, Int J Heat Mass Transf, 112, 891, 10.1016/j.ijheatmasstransfer.2017.04.137 Niu, 2016, Direct numerical simulation of two-phase turbulent flow in fuel cell flow channel, Int J Hydrogen Energy, 41, 3147, 10.1016/j.ijhydene.2015.11.026 Niu, 2017, Direct numerical simulation of low Reynolds number turbulent air–water transport in fuel cell flow channel, Sci Bull, 62, 31, 10.1016/j.scib.2016.11.010 Tang, 2010, Alkaline polymer electrolyte fuel cells: principle, challenges, and recent progress, Sci China Chem, 53, 357, 10.1007/s11426-010-0080-5 Zeng, 2011, Alkaline ionomer with tuneable water uptakes for electrochemical energy technologies, Energy Environ Sci, 4, 4925, 10.1039/c1ee02349g