Tribological property of 3-aminopropyltriethoxysilane-graphite oxide nanosheets reinforced polyethersulfone composite under drying sliding condition

Tribology International - Tập 103 - Trang 316-330 - 2016
Shicheng Yan1, Yulin Yang1,2, Laizhou Song2,3, Xiaowen Qi1,2, Zhen Zuo1, Yahong Xue1
1College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China
2Aviation Key Laboratory of Science and Technology on Generic Technology of Self-Lubricating Spherical Plain Bearing, Yanshan University, Qinhuangdao 066004, China
3College of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, 066004, China

Tài liệu tham khảo

Ye, 2013, Transfer film evolution and its role in promoting ultra-low wear of a PTFE nanocomposite, Wear, 297, 1095, 10.1016/j.wear.2012.12.002

Wang, 2014, A computed model for tribological properties of porous self-lubricating PPS composites: numerical analysis and experimental verification, Wear, 320, 94, 10.1016/j.wear.2014.08.015

Schlosser, 2015, Nanosheets of MoS2-Oleylamine as hybrid filler for self-lubricating polymer composites: thermal, tribological, and mechanical properties, Polym Compos, 36, 1124, 10.1002/pc.23444

Andrich, 2013, Characterisation of the friction and wear behaviour of textile reinforced polymer composites in contact with diamond-like carbon layers, Tribol Int, 62, 29, 10.1016/j.triboint.2013.01.023

Sharma, 2011, Influence of fiber–matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites, Wear, 271, 2919, 10.1016/j.wear.2011.06.012

Sharma, 2011, Influence of molecular weight on performance properties of polyethersulphone and its composites with carbon fabric, Wear, 274, 388

Sharma, 2011, Abrasive wear studies on composites of PEEK and PES with modified surface of carbon fabric, Tribol Int, 44, 81, 10.1016/j.triboint.2010.09.005

Friedrich, 1993, 8, 209

Bijwe, 2006, Influence of orientation and volume fraction of Aramid fabric on abrasive wear performance of polyethersulfone composites, Wear, 260, 401, 10.1016/j.wear.2005.02.087

Sharma, 2012, Surface designing of carbon fabric polymer composites with nano and micron sized PTFE particles, J Mater Sci, 47, 4928, 10.1007/s10853-012-6367-5

Hunke, 2015, Influence of plasma pre-treatment of polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of polyethersulfone (PESU)-PTFE composites, Wear, 328, 480, 10.1016/j.wear.2015.03.004

Bijwe, 2000, A study of the role of solid lubricant and fibrous reinforcement in modifying the wear performance of polyethersulphone, J Synth Lubr, 17, 99, 10.1002/jsl.3000170202

Roy, 2012, Modifications of carbon for polymer composites and nanocomposites, Prog Polym Sci, 37, 781, 10.1016/j.progpolymsci.2012.02.002

Bian, 2011, Preparation and characterization of modified graphite oxide/poly (propylene carbonate) composites by solution intercalation, Polym Degrad Stab, 96, 1833, 10.1016/j.polymdegradstab.2011.07.013

Bian, 2013, Processing and assessment of high-performance poly(butylene terephthalate) nanocomposites reinforced with microwave exfoliated graphite oxide nanosheets, Eur Polym J, 49, 1406, 10.1016/j.eurpolymj.2013.02.027

Wan, 2014, Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide, Compos Part A, 64, 79, 10.1016/j.compositesa.2014.04.023

Wan, 2014, Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties, Carbon, 69, 467, 10.1016/j.carbon.2013.12.050

Cano, 2013, Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains, Carbon, 52, 363, 10.1016/j.carbon.2012.09.046

Cao, 2015, Enhanced stress transfer and thermal properties of polyimide composites with covalent functionalized reduced graphene oxide, Compos Part A, 68, 140, 10.1016/j.compositesa.2014.10.007

Liu, 2016, Enhanced tribological properties of aligned reduced graphene oxide-Fe3O4@polyphosphazene/bismaleimides composites, Carbon, 102, 145, 10.1016/j.carbon.2016.02.021

Malas, 2014, Effect of expanded graphite and modified graphite flakes on the physical and thermo-mechanical properties of styrene butadiene rubber/polybutadiene rubber (SBR/BR) blends, Mater Des, 55, 664, 10.1016/j.matdes.2013.10.038

Xu, 2016, Preparation, tribological properties and biocompatibility of fluorinated graphene/ultrahigh molecular weight polyethylene composite materials, Appl Surf Sci, 370, 201, 10.1016/j.apsusc.2016.02.100

Li, 2016, A solvent-free graphene oxide nanoribbon colloid as filler phase for epoxy-matrix composites with enhanced mechanical, thermal and tribological performance, Carbon, 96, 40, 10.1016/j.carbon.2015.09.035

Pan, 2012, Tribological and mechanical investigation of MC nylon reinforced by modified graphene oxide, Wear, 294, 395, 10.1016/j.wear.2012.07.032

Agrawal, 2015, Efficient nanocomposite formation of acyrlo nitrile rubber by incorporation of graphite and graphene layers: reduction in friction and wear rate, Procedia Mater Sci, 10, 139, 10.1016/j.mspro.2015.06.035

ASTM G133. Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear; 27 August 2010.

Sharma, 2011, Studies for wear property correlation for carbon fabric-reinforced PES composites, Tribol Lett, 43, 267, 10.1007/s11249-011-9805-7

ASTM d-638. Standard Test Method for Tensile Properties of Plastics; 1 April 2008.

Zhao, 2007, Preparation and properties of electrically conductive PPS/expanded graphite nanocomposites, Compos Sci Technol, 67, 2528, 10.1016/j.compscitech.2006.12.009

Jin, 2013, The exploration of a new adsorbent as MnO2 modified expanded graphite, Mater Lett, 110, 69, 10.1016/j.matlet.2013.07.042

Ismail, 2008, Characterization of polyethersulfone/Matrimid ® 5218 miscible blend mixed matrix membranes for O2/N2 gas separation, Sep Purif Technol, 63, 200, 10.1016/j.seppur.2008.05.007

Peyravi, 2012, Tailoring the surface properties of PES ultrafiltration membranes to reduce the fouling resistance using synthesized hydrophilic copolymer, Microporous Mesoporous Mater, 160, 114, 10.1016/j.micromeso.2012.04.036

Fazaeli, 2014, In vivo SPECT imaging of tumors by 198,199Au-labeled grapheme oxide nanostructures, Mater Sci Eng C, 45, 196, 10.1016/j.msec.2014.09.019

Song, 2010, Preparation and characterization of exfoliated graphite and its styrene butadiene rubber nanocomposites, J Ind Eng Chem, 16, 1059, 10.1016/j.jiec.2010.07.004

Min, 2014, Study of tribological properties of polyimide/grapheme oxide nanocomposite films under seawater-lubricated condition, Tribol Int, 80, 131, 10.1016/j.triboint.2014.06.022

Song, 2012, Preparation and tribological properties of graphene/poly(ether ether ketone) nanocomposites, J Mater Sci, 47, 6436, 10.1007/s10853-012-6574-0

Stankovich, 2006, Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets, Carbon, 44, 3342, 10.1016/j.carbon.2006.06.004

Ismail, 2008, Enhanced gas permeation performance of polyethersulfone mixed matrix hollow fiber membranes using novel Dynasylan Ameo silane agent, J Membr Sci, 319, 306, 10.1016/j.memsci.2008.03.067

Song, 2016, Tribological properties of α-, and β-manganese dioxide/polytetrafluoroethylene composites under the dry sliding condition, Tribol Int, 94, 187, 10.1016/j.triboint.2015.08.038

Zuo, 2015, Tribological behavior of polyethersulfone-reinforced polytetrafluoroethylene composite under dry sliding condition, Tribol Int, 86, 17, 10.1016/j.triboint.2015.01.019

Min, 2015, Preparation and tribological properties of polyimide/carbon sphere microcomposite films under seawater condition, Tribol Int, 90, 175, 10.1016/j.triboint.2015.04.027

Ye, 2016, Tribological properties of fluorinated graphene reinforced polyimide composite coatings under different lubricated conditions, Compos Part A, 81, 282, 10.1016/j.compositesa.2015.11.029

Liang, 2016, In-situ exfoliated graphene for high-performance water-based lubricants, Carbon, 96, 1181, 10.1016/j.carbon.2015.10.077

Kadiyala, 2013, Surface lubrication of graphite fabric reinforced epoxy composites with nano- and micro-sized hexagonal boron nitride, Wear, 301, 802, 10.1016/j.wear.2012.11.069

Chen, 2016, Nanosheets of MoS2 and reduced graphene oxide as hybrid fillers improved the mechanical and tribological properties of bismaleimide composites, Compos Sci Technol, 125, 47, 10.1016/j.compscitech.2016.01.020

Lin, 2010, Preparation and characterization of BMI resin/graphite oxide nanocomposites, Polym Test, 29, 537, 10.1016/j.polymertesting.2010.01.007

Thông tin
Thông tin xuất bản

Tribology International

Tập 103

316-330

Thông tin tác giả