Studies for Wear Property Correlation for Carbon Fabric-Reinforced PES Composites
Tóm tắt
Polyethersulfone (PES) composites were developed with carbon fabric (CF). Cold remote nitrogen oxygen plasma (CRNOP) treatment was employed to the CF to incorporate functional groups and promote fiber–matrix adhesion. This study includes the effect of PES melt flow index (MFI) on the wettability of CF and its influence on fretting wear performance. Evaluations of fretting wear properties of composites led to the conclusion that the CRNOP treatment proved beneficial to enhance performance properties significantly. Polymer MFI and treatment to CF proved to be the decisive parameters for controlling performance of composites apart from operating parameters. Perforations on the treated carbon fiber, evidently observed by FESEM, improved the fiber–matrix adhesion, and hence the performance properties. Artificial neuron network (ANN) was used for prediction of the wear behavior of composites.
Tài liệu tham khảo
Bill, R.C.: Selected fretting wear resistant coatings for Ti-6%Al-4%V alloy. Wear 106, 283–301 (1985)
Jacobs, O., Friedrich, K., Schulte, K.: Fretting fatigue of continuous carbon fibre reinforced polymer composites. Wear 145, 167–188 (1991)
Yan, F.Y., Xue, Q.J.: Study of fretting wear behaviour of FEP. J. Appl. Polym. Sci. 67, 1119–1125 (1998)
Bijwe, J., Indumathi, J., Ghosh, A.K.: Role of fabric reinforcement on low amplitude oscillating wear of polyetherimide composites. Wear 256, 27–37 (2004)
Bijwe, J., Rattan, R., Fahim, M.: Influence of weave of carbon fabric on low amplitude oscillating wear performance of polyetherimide composites. Wear 262, 727–735 (2007)
Bijwe, J., Rattan, R.: Influence of content of carbon fabric on the low amplitude oscillating wear performance of polyetherimide composites. Tribol. Lett. 23, 223–229 (2006)
Zhang, G., Schlarb, A.K.: Correlation of the tribological behaviors with the mechanical properties of poly-ether-ether-ketones (PEEKs) with different molecular weights and their fiber filled composites. Wear 266, 337–344 (2009)
Lu, Z.P., Friedrich, K.: On sliding friction and wear of PEEK and its composites. Wear 624, 181–183 (1995)
Fornes, T.D., Yoon, P.J., Keskkula, H., Paul, D.R.: Nylon 6 nanocomposites-effect of matrix molecular weight. Polymer 42, 9929–9940 (2001)
Sharma, M., Bijwe, J., Mitschang, P.: Abrasive wear studies on composites of PEEK and PES with modified surface of carbon fabric. Tribol. Int. 44, 81–91 (2011)
Tiwari, S., Bijwe, J., Panier, S.: Adhesive wear performance of polyetherimide composites with plasma treated carbon fabric. Tribol. Int. 44, 782–788 (2011)
Tiwari, S., Sharma, M., Panier, S., Mutel, B., Mitschang, P., Bijwe, J.: Influence of cold remote nitrogen oxygen plasma treatment on carbon fabric and its composites with specialty polymers. J. Mater. Sci. 46, 964–974 (2011)
Tiwari, S., Bijwe, J., Panier, S.: Influence of plasma treatment on carbon fabric for enhancing abrasive wear properties of polyetherimide composites. Tribol. Lett. 41, 153–162 (2011)
Kolodziejczyk, T., Toscano, R., Fouvry, S., Morales-Espejel, G.: Artificial intelligence as efficient technique for ball bearing fretting wear damage prediction. Wear 268, 309–315 (2010)
Zhang, Z., Velten, K., Friedrich, K.: Prediction on tribological properties of short fibre composites using artificial neural networks. Wear 252, 668–675 (2002)
Vivien, C., Wartelle, C., Mutel, B., Grimblot, J.: Surface property modification of a polyethylene powder by coupling fluidized bed and far cold remote nitrogen plasma technologies. Surf. Interf. Anal. 34, 575–579 (2002)
Sharma, M., Tiwari, S., Bijwe, J.: Optimization of material parameters for development of polyetherimide composites. Mater. Sci. Eng. B 168, 55–59 (2010)
Bijwe, J., Rattan, R.: Influence of weave of carbon fabric in polyetherimide composites in various wear situations. Wear 263, 984–991 (2007)
Schulte, K., Friedrich, K., Jacobs, O.: Fretting and fretting-fatigue of advanced composite laminates. In: Friedrich, K. (ed.) Advances in Composite Tribology. Elsevier, The Netherlands (1993)
Zhang, Z., Friedrich, K.: Artificial neural networks applied to polymer composites: a review. Compos. Sci. Tech. 63, 2029–2044 (2003)
LiuJie, X., Davim, P.J., Cardoso, R.: Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks. J. Mater. Proc. Tech. 189, 374–378 (2007)
Lolas, S., Olatunbosun, O.A.: Prediction of vehicle reliability performance using artificial neural networks. Expert Syst. Appl. 34, 2360–2369 (2008)