Effect of expanded graphite and modified graphite flakes on the physical and thermo-mechanical properties of styrene butadiene rubber/polybutadiene rubber (SBR/BR) blends

Mark, 1985 Huson, 1984, Use of dynamic mechanical analysis in comparing vulcanization of different phases in NR/BR and IR/BR blends, J Polym Sci B Polym Lett Ed, 22, 143, 10.1002/pol.1984.130220303 Wu, 2011, Silica-modified SBR/BR blends, J Appl Polym Sci, 120, 3695, 10.1002/app.33576 Rajasekar, 2012, Development of compatibilized SBR and EPR nanocomposites containing dual filler system, Mater Des, 35, 878, 10.1016/j.matdes.2011.10.018 Dal Pont, 2013, Microstructure and properties of styrene–butadiene rubber based nanocomposites prepared from an aminosilane modified synthetic lamellar nanofiller, J Polym Sci B Polym Phys, 51, 1051, 10.1002/polb.23307 Jineesh, 2011, SBR-clay-carbon black hybrid nanocomposites for tire tread application, J Polym Res, 18, 1625, 10.1007/s10965-011-9567-9 Kent, 2006 Salimi, 2009, Optimization of physico-mechanical properties of silica-filled NR/SBR compounds, Adv Polym Technol, 28, 224, 10.1002/adv.20169 López-Manchado, 2003, Preparation and characterization of organoclay nanocomposites based on natural rubber, Polym Int, 52, 1070, 10.1002/pi.1161 Hagel, 2008, Got milk? the secret life of laticifers, Trends Plant Sci, 13, 631, 10.1016/j.tplants.2008.09.005 Das, 2008, Modified and unmodified multiwalled carbon nanotubes in high performance solution-styrene–butadiene and butadiene rubber blends, Polymer, 49, 5276, 10.1016/j.polymer.2008.09.031 Amraee, 1996, Qualitative and quantitative analysis of SBR/BR blends by thermogravimetric analysis, Rubber Chem Technol, 69, 130, 10.5254/1.3538353 Vaia, 1997, Lattice model of polymer melt intercalation in organically modified layered silicates, Macromolecules, 30, 7990, 10.1021/ma9514333 Vaia, 1997, Polymer melt intercalation in organically-modified layered silicates: model predictions and experiment, Macromolecules, 30, 8000, 10.1021/ma9603488 Balazs, 1998, Modeling the interactions between polymers and clay surfaces through self-consistent field theory, Macromolecules, 31, 8370, 10.1021/ma980727w Wang, 2012, Mechanical and tribological properties of acrylonitrile–butadiene rubber filled with graphite and carbon black, Mater Des, 39, 450, 10.1016/j.matdes.2012.02.051 Yang, 2007, Improved mechanical and functional properties of elastomer/graphite nanocomposites prepared by latex compounding, Acta Mater, 55, 6372, 10.1016/j.actamat.2007.07.043 Wang, 2012, Effect of expanded graphite (EG) dispersion on the mechanical and tribological properties of nitrile rubber/EG composites, Wear, 276–277, 85, 10.1016/j.wear.2011.12.009 Zhan, 2011, Dispersion and exfoliation of graphene in rubber by an ultrasonically-assisted latex mixing and in situ reduction process, Macromol Mater Eng, 296, 590, 10.1002/mame.201000358 Gu, 2009, Graphene sheets from worm-like exfoliated graphite, J Mater Chem, 19, 3367, 10.1039/b904093p Hua, 2010, A new poly(l-lactide)-grafted graphite oxide composite: facile synthesis, electrical properties and crystallization behaviors, Polym Degrad Stabl, 95, 2619, 10.1016/j.polymdegradstab.2010.07.023 Zhao, 2009, Adsorption of methylene blue from aqueous solutions by modified expanded graphite powder, Desalination, 249, 331, 10.1016/j.desal.2009.01.037 Li, 2013, Solvent-exfoliated and functionalized graphene with assistance of supercritical carbon dioxide, ACS Sustain Chem Eng, 1, 144, 10.1021/sc3000724 Konwer, 2011, Preparation and optical/electrical/electrochemical properties of expanded graphite-filled polypyrrole nanocomposite, Mater Chem Phys, 128, 283, 10.1016/j.matchemphys.2011.03.013 Bian, 2013, Fabrication of microwave exfoliated graphite oxide reinforced thermoplastic polyurethane nanocomposites: effects of filler on morphology, mechanical, thermal and conductive properties, Compos Part A Appl Sci Manuf, 47, 72, 10.1016/j.compositesa.2012.12.009 Kaniyoor, 2010, Graphene synthesis via hydrogen induced low temperature exfoliation of graphite oxide, J Mater Chem, 20, 8467, 10.1039/c0jm01876g Zhang, 2012, Supercapacitors based on low temperature partially exfoliated and reduced graphite oxide, J Power Sources, 212, 105, 10.1016/j.jpowsour.2012.03.101 Stankovich, 2006, Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets, Carbon, 44, 3342, 10.1016/j.carbon.2006.06.004 Thomson, 2001, Real time monitoring of isocyanate chemistry using a fiber-optic FTIR probe, Polym Prepr, 42, 310 Zhang, 2010, Poly (N-Vinylcarbazole) chemically modified graphene oxide, J Polym Sci Part A Polym Chem, 48, 2642, 10.1002/pola.24047 Malesevic, 2008, Synthesis of few-layer graphene via microwave plasma-enhanced chemical vapour deposition, Nanotechnology, 19, 305604, 10.1088/0957-4484/19/30/305604 Han, 1998, Porous graphite matrix for chemical heat pumps, Carbon, 36, 1801, 10.1016/S0008-6223(98)00150-X Yasmin, 2004, Mechanical and thermal properties of graphite/epoxy composites, Polymer, 45, 8211, 10.1016/j.polymer.2004.09.054 Bortolotti, 1998, Dynamic properties of batch polymerized SSBR based compounds, Kautsch Gummi Kunstst, 151, 331 Zhao, 2004, Structural morphology and properties of star styrene–isoprene–butadiene rubber and natural rubber/star styrene–butadiene rubber blends, J Appl Polym Sci, 93, 336, 10.1002/app.20385 George, 2008, Ethylene vinyl acetate/expanded graphite nanocomposites by solution intercalation: preparation, characterization and properties, J Mater Sci, 43, 702, 10.1007/s10853-007-2193-6 Teh, 2004, Effect of Epoxidized Natural Rubber as a compatibilizers in melt compounded natural rubber-organoclay nanocomposites, Euro Polym J, 40, 2513, 10.1016/j.eurpolymj.2004.06.025 Ismail, 1998, The effects of multifunctional additive and vulcanization systems on silica filled Epoxidized Natural Rubber compounds, Euro Polym J, 34, 1857, 10.1016/S0014-3057(98)00029-9 Tabsan, 2010, Abrasion behavior of layered silicate reinforced natural rubber, Wear, 269, 394, 10.1016/j.wear.2010.04.018 Arayapranee, 2005, Application of rice husk ash as fillers in the natural rubber industry, J Appl Polym Sci, 98, 34, 10.1002/app.21004 Hong, 2007, Effect of particle size and structure of carbon blacks on the abrasion of filled elastomer compounds, J Mater Sci, 42, 8391, 10.1007/s10853-007-1795-3