Influence of plasma pre-treatment of polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of Polyethersulfone (PESU)–PTFE composites

Duan, 2009, Comparative study of tribological properties of polyphenylene Sulfide (PPS), polyethersulfone (PES), and polysulfone (PSU), J. Macromol. Sci. Part B, 48, 269, 10.1080/00222340802679474 Künkel, 2005 Atkins, 1984, Wear of polymers, J. Mater. Sci. Lett., 3, 779, 10.1007/BF00727971 Duan, 2009, Comparative study of tribological properties of polyphenylene Sulfide (PPS), polyethersulfone (PES), and polysulfone (PSU), J. Macromol. Sci. Part B, 48, 269, 10.1080/00222340802679474 Duan, 2009, Friction and wear of polyphenylene sulfide (PPS), polyethersulfone (PES) and polysulfone (PSU) under different cooling conditions, J. Macromol. Sci. Part B, 48, 604, 10.1080/00222340902837899 Bijwe, 2000, Influence of solid lubricants and fibre reinforcement on wear behaviour of polyethersulphone, Tribol. Int., 33, 697, 10.1016/S0301-679X(00)00104-3 Aurilia, 2010, Nanofilled polyethersulfone as matrix for continuous glass fibers composites: mechanical properties and solvent resistance, Adv. Polym. Technol., 29, 146, 10.1002/adv.20187 Bijwe, 2004, Influence of concentration of aramid fabric on abrasive wear performance of polyethersulfone composites, Tribol. Lett., 17, 187, 10.1023/B:TRIL.0000032444.69873.dd Bijwe, 2013, Nano and micro PTFE for surface lubrication of carbon fabric reinforced polyethersulphone composites, 19-3 Basavaraj, 2012, Investigations Q6 on the influence of polytetrafluoroethylene powder as a filler on physico-mechanical and wear characteristics of nylon 66/graphite composites, High Perform. Polym., 24, 616, 10.1177/0954008312446765 S. Ebnesajjad, R.A. Morgan, Fluorinated Additives for Plastics, (2012) 107–48. Elsevier Oxford. Li, 2010, The Impact and tribological properties of PTFE composites filled with PA6, J. Thermoplast. Compos. Mater., 23, 807, 10.1177/0892705709356339 Friedrich, 2005, Effects of various fillers on the sliding wear of polymer composites, Compos. Sci. Technol., 65, 2329, 10.1016/j.compscitech.2005.05.028 Franke, 2007, Tribological behaviour of new chemically bonded PTFE polyamide compounds, Wear, 262, 242, 10.1016/j.wear.2006.05.001 Inagaki, 2002, Surface modification of poly (tetrafluoroethylene) with pulsed hydrogen plasma, Appl. Polym. Sci., 83, 340, 10.1002/app.2249 Shojaei, 2011, Effect of chemical treatment of Teflon powder on the properties of polyamide 66/Teflon composites prepared by melt mixing, Macromol. Res., 19, 613, 10.1007/s13233-011-0612-7 Aderikha, 2011, Mechanical and tribological behavior of PTFE–polyoxadiazole fiber composites effect of filler treatment, Wear, 271, 970, 10.1016/j.wear.2011.04.011 Khan, 2009, Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds, Wear, 266, 175, 10.1016/j.wear.2008.06.012 Klüpfel, 2006, Functionalization of irradiated PTFE micropowder with methacryl- or hydroxy groups for chemical coupling of PTFE with different matrix polymers, J. Appl. Polym. Sci., 101, 2819, 10.1002/app.22885 Diener electronic GmbH+Co. KG. Plasma technology. [May 25, 2013]; Available from: 〈http://www.plasmasurfacetechnology.eu/media/Plasmatechnik_en_web.pdf〉. Vandencasteele, 2004, Surface characterization of plasma-treated PTFE surfaces: an OES, XPS and contact angle study, Surf. Interface Anal., 36, 1027, 10.1002/sia.1829 Caro, 1999, Insertion of sulfur-containing functional groups into polytetrafluoroethylene (PTFE) by low pressure plasma treatment, Surf. Coat. Technol., 116-119, 792, 10.1016/S0257-8972(99)00140-1 Dufour, 2012, PTFE surface etching in the post-discharge of a scanning RF plasma torch: evidence of Ejected fluorinated species, Plasma Process. Polym., 9, 820, 10.1002/ppap.201100209 Jie-Rong, 1997, Studies on the surface free energy and surface structure of PTFE film treated with low temperature plasma, J. Appl. Polym. Sci., 63, 1733, 10.1002/(SICI)1097-4628(19970328)63:13<1733::AID-APP4>3.0.CO;2-H Liu, 2004, Comparative study on the effect of RF and DBD plasma treatment on PTFE surface modification, Mater. Chem. Phys., 85, 340, 10.1016/j.matchemphys.2004.01.026 Wilson, 2001, Plasma modification of PTFE surfaces. Part II: plasma-treated surfaces following storage in air or PBS, Surf. Interface Anal., 31, 397, 10.1002/sia.1066 Wilson, 2001, Plasma modification of PTFE surfaces. Part I: surfaces immediately following plasma treatment, Surf. Interface Anal., 31, 385, 10.1002/sia.1065 Soever, 2011, Effects of lubrication in high speed falling dart testing of elastomer materials, Polymer Testing, 30, 703, 10.1016/j.polymertesting.2011.06.003 Liu, 1991, Instrumented dart impact evaluation of linear low density polyethylene at controlled impact energy, Polym. Eng. Sci., 31, 753, 10.1002/pen.760311011 Beamson, 1992 Badey, 1996, A comparative study of the effects of ammonia and hydrogen plasma downstream treatment on the surface modification of polytetrafluoroethylene, Polymer, 37, 1377, 10.1016/0032-3861(96)81135-9 Badey, 1994, Surface modification of polytetrafluoroethylene by microwave plasma downstream treatment, Polymer, 35, 2472, 10.1016/0032-3861(94)90365-4 Pukanszky, 1999, Adhes. Surf. Modif., 139, 109 Kalacska, 2012, An engineering approach to dry friction behaviour of numerous engineering plastics with respect to the mechanical properties, Express Polym. Lett., 7, 199, 10.3144/expresspolymlett.2013.18 1986 Tanaka, 1992, Effect of temperature on the friction and wear of heat-resistant polymer-based composites, J. Synth. Lubr., 8, 281, 10.1002/jsl.3000080404 Sinha, 2009 Bahadur, 2000, The development of transfer layers and their role in polymer tribology, Wear, 245, 92, 10.1016/S0043-1648(00)00469-5 Hüttinger, 1994, Evidence for chemical bond formation between surface treated carbon fibres and high temperature thermoplastics, J. Appl. Polym. Sci., 51, 737, 10.1002/app.1994.070510420