Characterization of polyethersulfone/Matrimid® 5218 miscible blend mixed matrix membranes for O2/N2 gas separation

D.Q. Vu, Formation and characterization of asymmetric carbon molecular sieve and mixed matrix membrane for natural gas purification, Ph.D. Thesis, The University of Texas at Austin, 2001. Kusworo, 2008, Dependence of membrane morphology and performance on preparation conditions: The shear rate effect in membrane casting, Sep. Purif. Technol., 61, 249, 10.1016/j.seppur.2007.10.017 Saufi, 2002, Development and characterization of polyacrylonitrile (PAN) based carbon fiber membrane, Songk. J. Sci. Technol., 24, 843 Robeson, 1991, Correlation of separation factors versus permeability for polymeric membranes, J. Membr. Sci., 62, 165, 10.1016/0376-7388(91)80060-J Ismail, 2008, Enhanced gas permeation performance of polyethersulfone mixed matrix hollow fiber membranes using Dynasylan Ameo silant agent, J. Membr. Sci., 319, 306, 10.1016/j.memsci.2008.03.067 Mahajan, 2002, Mixed matrix membrane materials with glassy polymers: part 1, Polym. Eng. Sci., 42, 1420, 10.1002/pen.11041 Pechar, 2002, Preparation and chacaracterization of a glassy fluoronated polyimide zeolite-mixed matrix membrane, Desalination, 146, 3, 10.1016/S0011-9164(02)00462-9 Chung, 2003, Characterization of permeability and sorption in matrimid/C60 mixed matrix membranes, J. Membr. Sci., 211, 91, 10.1016/S0376-7388(02)00385-X Kapantaidakis, 2002, Preparation and characterization of gas separation hollow fiber membranes based on polyethersulfone–polyimide miscible blends, Desalination, 145, 353, 10.1016/S0011-9164(02)00435-6 Khulbe, 2003, Characterization of polyethersulfone–polyimide hollow fiber membranes by Atomic Force Microscopy and Contact Angle Goniometry, J. Membr. Sci., 226, 63, 10.1016/j.memsci.2003.08.011 Mahajan, 2002, Challenges in forming successful mixed matrix membranes with rigid polymeric materials, J. Appl. Polym. Sci., 86, 881, 10.1002/app.10998 Yong, 2001, Zeolite-filled polyimide membrane containing 2,4,6-triaminopyrimide, J. Membr. Sci., 188, 151, 10.1016/S0376-7388(00)00659-1 Li, 2005, The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)–zeolite mixed matrix membranes, J. Membr. Sci., 260, 45, 10.1016/j.memsci.2005.03.019 Jia, 1991, Molecular sieving effect of the zeolite-filled silicone rubber membranes in gas permeation, J. Membr. Sci., 57, 289, 10.1016/S0376-7388(00)80684-5 Kapantaidakis, 1996, Gas permeation through PSF–PI miscible blend membranes, J. Membr. Sci., 110, 239, 10.1016/0376-7388(95)00265-0 Vankelecom, 1995, Incorporation of zeolites in polyimide membranes, J. Phys. Chem., 99, 13187, 10.1021/j100035a023 Duval, 1994, Preparation of zeolite filled glassy membrane, J. Appl. Polym. Sci., 54, 409, 10.1002/app.1994.070540401 Jia, 1992, Preparation and characterization of thin-film zeolite–PDMS composite membranes, J. Membr. Sci., 73, 119, 10.1016/0376-7388(92)80122-Z Vu, 2003, Effect of condensable impurity in CO2/CH4 gas feeds on performance of mixed matrix membranes using carbon molecular sieves, J. Membr. Sci., 221, 233, 10.1016/S0376-7388(03)00245-X Duval, 1993, Adsorbent filled membranes for gas separation. Part 1. Improvement of the gas separation properties of polymeric membranes by incorporation of microporous adsorbents, J. Membr. Sci., 80, 189, 10.1016/0376-7388(93)85143-K Smaihi, 1999, Gas separation properties of hybrid imide-siloxane copolymers with various silica contents, J. Membr. Sci., 161, 157, 10.1016/S0376-7388(99)00103-9 Jaffe, 1994, High performance polymer blends, Adv. Poylm. Sci., 117, 297, 10.1007/BFb0021202 Menczel, 2003, Thermal measurements on poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole] fibers, J. Therm. Anal. Calorim., 59, 1023, 10.1023/A:1010155215759 Xu, 1990, Polymeric asymmetric membranes made from polyetherimide/poly-benzimidazole/poly(ethylene gylcol)(PEI/PBI/PEG) for oil–surfactant–water separation, J. Membr. Sci., 158, 41, 10.1016/S0376-7388(99)00030-7 Chung, 1990, Film and membrane properties of polybenzimidazole (PBI) and polyarylate blends, Polym. Eng. Sci., 30, 1, 10.1002/pen.760300102 R. Camargo, F. Mercer, T.C. Cheng, Composition of poly(imides) having phenylindane diamines and/or dianhydride moieties in the poly(imide) backbone, US Patent 5,047,487 (1991). Liang, 1992, Thermal and reological properties of miscible polyethersulphone/polyimide blends, J. Polym. Sci. B: Polym. Phys., 30, 465, 10.1002/polb.1992.090300506 Nunes, 1999, Membranes of poly(etherimide) and nanodispersed silica, J. Membr. Sci., 157, 219, 10.1016/S0376-7388(98)00379-2 Tantekin-Ersolmaz, 2000, Effect of zeolite particle size on the performance of polymer–zeolite mixed matrix membranes, J. Membr. Sci., 175, 285, 10.1016/S0376-7388(00)00423-3 Okumus, 1990, Development of a zeolite-polymer membrane for pervaporation S. Kulprathipanja, E.W. Funk, S.S. Kulkarni, Y.A. Chang, Separation of monosaccharides from polysaccharides with mixed matrix membranes, U.S. Patent 4,735,193 (1888). Clarizia, 2004, Filler–polymer combination: a route to modify gas transport properties of a polymer membrane, Polymer, 45, 5671, 10.1016/j.polymer.2004.06.001