Numerical simulations of a double-wall cooling with internal jet impingement and external hexagonal arrangement of film cooling holes

Ekkad, 1999, Impingement heat transfer on a target plate with film cooling holes, J. Thermophys. Heat Tran., 13, 522, 10.2514/2.6471

Gillespie, 1998, Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry, ASME J. Turbomach., 120, 92, 10.1115/1.2841394

A Dabagh, 1990, Impingement/effusion cooling: the influence of the number of impingement holes and pressure loss on the heat transfer coefficient, ASME J. Turbomach., 112, 467, 10.1115/1.2927682

Ren, 2018, Internal and external cooling of a full coverage effusion cooling plate: effects of double wall configuration and conditions, Int. J. Therm. Sci., 124, 36, 10.1016/j.ijthermalsci.2017.09.021

Jung, 2017, Conjugate heat transfer on full-coverage film cooling with array jet impingements with various Biot numbers, Exp. Therm. Fluid Sci., 83, 1, 10.1016/j.expthermflusci.2016.12.008

Tai, 2004, Numerical approach to film cooling effectiveness over a plate surface with coolant impingement, J. Therm. Sci., 13, 67, 10.1007/s11630-004-0011-x

Miao, 2006, Numerical approach to hole shape effect on film cooling effectiveness over flat plate including internal impingement cooling chamber, Int. J. Heat Mass Tran., 49, 919, 10.1016/j.ijheatmasstransfer.2005.09.015

Rao, 2018, Multiple-jet impingement heat transfer in double-wall cooling structures with pin fins and effusion holes, Int. J. Therm. Sci., 133, 106, 10.1016/j.ijthermalsci.2018.07.021

Cho, 2008, Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing, J. Turbomach., 130, 10.1115/1.2812325

Tan, 2015, Experimental investigation on impingement/effusion cooling with short normal injection holes, Int. Commun. Heat Mass Tran., 69, 1, 10.1016/j.icheatmasstransfer.2015.09.005

Launder, 1974, The numerical computation of turbulent flows, Comput. Methods Appl. Math., 3, 269

Roache, 1994, Perspective: a method for uniform reporting of grid refinement studies, J. Fluid Eng., 116, 405, 10.1115/1.2910291

Jak, 2008, Procedure of estimation and reporting of uncertainty due to discretization in CFD applications, J. Fluid Eng., 130, 1

Ekkad, 2000, A transient liquid crystal thermography technique for gas turbine heat transfer measurements, Meas. Sci. Technol., 11, 957, 10.1088/0957-0233/11/7/312

Ireland, 2000, Liquid crystal measurements of heat transfer and surface shear stress, Meas. Sci. Technol., 11, 969, 10.1088/0957-0233/11/7/313

Hale, 2000, Film cooling effectiveness for short film cooling holes fed by a narrow plenum, J. Turbomach., 122, 553, 10.1115/1.1303705

Kohli, 1997, Adiabatic effectiveness, thermal fields, and velocity fields for film cooling with large angle injection, ASME J. Turbomach., 119, 352, 10.1115/1.2841118