Springer Science and Business Media LLC

Công bố khoa học tiêu biểu

* Dữ liệu chỉ mang tính chất tham khảo

Sắp xếp:  
Treatment of dorsally dislocated distal radius fractures with individualized 3D printed bracing: an exploratory study
Springer Science and Business Media LLC - Tập 6 - Trang 1-7 - 2020
H. M. J. Janzing, S. A. M. Bessems, M. A. P. Ligthart, E. M. M. Van Lieshout, H. P. Theeuwes, D. G. Barten, M. H. J. Verhofstad
The aim of this work was to develop a three-dimensionally (3D) printed brace for the acute treatment of dorsally dislocated and correctly reduced distal radius fractures (DRF). The hypothesis was that a brace shaped to the mirror image of the contralateral (non-fractured) wrist will have an optimal anatomical fit, resulting in improved comfort and lower rates of secondary fracture displacement. Va...... hiện toàn bộ
Utilizing 3D printing to assist pre-procedure planning of transjugular intrahepatic portosystemic shunt (TIPS) procedures: a pilot study
Springer Science and Business Media LLC - Tập 9 - Trang 1-9 - 2023
Lucas Richards, Shiv Dalla, Sharon Fitzgerald, Carissa Walter, Ryan Ash, Kirk Miller, Adam Alli, Aaron Rohr
3D (three-dimensional) printing has been adopted by the medical community in several ways, procedure planning being one example. This application of technology has been adopted by several subspecialties including interventional radiology, however the planning of transjugular intrahepatic portosystemic shunt (TIPS) placement has not yet been described. The impact of a 3D printed model on procedural...... hiện toàn bộ
Efficacy of using a 3D printed lumbosacral spine phantom in improving trainee proficiency and confidence in CT-guided spine procedures
Springer Science and Business Media LLC - Tập 4 - Trang 1-8 - 2018
Yi Li, Zhixi Li, Simon Ammanuel, Derrick Gillan, Vinil Shah
Minimally-invasive spine procedures provide targeted, individualized diagnosis and pain management for patients. Competence in these procedures is acquired through experience and training. We created a 3D printed model of a degenerative lumbosacral spine with scoliosis and spondylosis, using materials that mimic bone and soft tissue density under CT. In this study, we evaluate the efficacy of usin...... hiện toàn bộ
The use of 3D additive manufacturing technology in autogenous dental transplantation
Springer Science and Business Media LLC - - 2020
Pau Cahuana-Bartra, Abel Cahuana-Cárdenas, Lluís Brunet-Llobet, Marta Ayats-Soler, Jaume Miranda-Rius, Alejandro Rivera-Baró
In medicine and dentistry, 3D technology allows the virtual planning and printing of surgical replicas of anatomical structures that can facilitate certain transplant procedures. In dentistry, 3D technology is useful in autogenous tooth transplantation. We present a clinical case of an ectopic mandibular second premolar, describing the preoperative planning with dental replicas and the autotranspl...... hiện toàn bộ
COVID-19 and a novel initiative to improve safety by 3D printing personal protective equipment parts from computed tomography
Springer Science and Business Media LLC - Tập 6 - Trang 1-12 - 2020
John J. Coté, John Haggstrom, Ranuga Vivekanandan, Kristin A. Coté, Daniel L. Real, David P. Weber, Anne Cheng, Nicholas G. Dubay, Robin Farias-Eisner
Powered air-purifying respirators are in short supply and can break down with extended use. Replacement parts can become hard to acquire. The aim of this study was to create an innovative quality improvement proof of concept using rapid prototyping. Here we report three cases of 3D printed powered air-purifying respirator parts. 3D printing was performed on all parts using fused deposition modelin...... hiện toàn bộ
Guiding prosthetic femoral version using 3D-printed patient-specific instrumentation (PSI): a pilot study
Springer Science and Business Media LLC - Tập 9 - Trang 1-8 - 2023
Maria Moralidou, Johann Henckel, Anna Di Laura, Alister Hart
Implantation of the femoral component with suboptimal version is associated with instability of the reconstructed hip joint. High variability of Prosthetic Femoral Version (PFV) has been reported in primary Total Hip Arthroplasty (THA). Three-dimensional (3D) Patient-Specific Instrumentation (PSI) has been recently developed and may assist in delivering a PFV within the intended range. We performe...... hiện toàn bộ
Dimensional variability characterization of additively manufactured lattice coupons
Springer Science and Business Media LLC - Tập 8 - Trang 1-13 - 2022
Kirstie Lane Snodderly, Magdalene Fogarasi, Yutika Badhe, Ankit Parikh, Daniel Porter, Albert Burchi, Laura Gilmour, Matthew Di Prima
Additive manufacturing (AM), commonly called 3D Printing (3DP), for medical devices is growing in popularity due to the technology’s ability to create complex geometries and patient-matched products. However, due to the process variabilities which can exist between 3DP systems, manufacturer workflows, and digital conversions, there may be variabilities among 3DP parts or between design files and f...... hiện toàn bộ
Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality
Springer Science and Business Media LLC - Tập 8 - Trang 1-10 - 2022
Reena M. Ghosh, Matthew A. Jolley, Christopher E. Mascio, Jonathan M. Chen, Stephanie Fuller, Jonathan J. Rome, Elizabeth Silvestro, Kevin K. Whitehead
Surgical and catheter-based interventions for congenital heart disease require precise understanding of complex anatomy. The use of three-dimensional (3D) printing and virtual reality to enhance visuospatial understanding has been well documented, but integration of these methods into routine clinical practice has not been well described. We review the growth and development of a clinical 3D model...... hiện toàn bộ
Dimensional accuracy and precision and surgeon perception of additively manufactured bone models: effect of manufacturing technology and part orientation
Springer Science and Business Media LLC - - 2024
Emir Benca, Barbara Eckhart, Alexander Stoegner, Ewald Unger, Martin Bittner-Frank, Andreas Strassl, Claudia Gahleitner, Lena Hirtler, Reinhard Windhager, Gerhard M. Hobusch, Francesco Moscato
Additively manufactured (AM) anatomical bone models are primarily utilized for training and preoperative planning purposes. As such, they must meet stringent requirements, with dimensional accuracy being of utmost importance. This study aimed to evaluate the precision and accuracy of anatomical bone models manufactured using three different AM technologies: digital light processing (DLP), fused de...... hiện toàn bộ
Chest wall reconstruction with an anatomically designed 3-D printed titanium ribs and hemi-sternum implant
Springer Science and Business Media LLC - Tập 6 - Trang 1-7 - 2020
Ira Goldsmith, Peter Llewelyn Evans, Heather Goodrum, James Warbrick-Smith, Thomas Bragg
Chest wall resection following wide local excision for bone tumor results in a large defect. Reconstructing this defect is complex and requires skeletal and soft tissue reconstruction. We describe the reconstruction of a large skeletal defect with a three-dimensional (3-D) printed custom-made, anatomically designed, titanium alloy ribs and hemi-sternum implant. To design the implant manual bone th...... hiện toàn bộ
Tổng số: 152   
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 10