Journal of the American Water Resources Association

ABSTRACT: A conceptual, continuous time model called SWAT (Soil and Water Assessment Tool) was developed to assist water resource managers in assessing the impact of management on water supplies and nonpoint source pollution in watersheds and large river basins. The model is currently being utilized in several large area projects by EPA, NOAA, NRCS and others to estimate the off‐site impacts of climate and management on water use, non‐point source loadings, and pesticide contamination. Model development, operation, limitations, and assumptions are discussed and components of the model are described. In Part II, a GIS input/output interface is presented along with model validation on three basins within the Upper Trinity basin in Texas.

ABSTRACT: The State of Texas has initiated the development of a Total Maximum Daily Load program in the Bosque River Watershed, where point and nonpoint sources of pollution are a concern. Soil Water Assessment Tool (SWAT) was validated for flow, sediment, and nutrients in the watershed to evaluate alternative management scenarios and estimate their effects in controlling pollution. This paper discusses the calibration and validation at two locations, Hico and Valley Mills, along the North Bosque River. Calibration for flow was performed from 1960 through 1998. Sediment and nutrient calibration was done from 1993 through 1997 at Hico and from 1996 through 1997 at Valley Mills. Model validation was performed for 1998. Time series plots and statistical measures were used to verify model predictions. Predicted values generally matched well with the observed values during calibration and validation (R²≥ 0.6 and Nash‐Suttcliffe Efficiency ≥ 0.5, in most instances) except for some underprediction of nitrogen during calibration at both locations and sediment and organic nutrients during validation at Valley Mills. This study showed that SWAT was able to predict flow, sediment, and nutrients successfully and can be used to study the effects of alternative management scenarios.

ABSTRACT: The Palmer Drought Severity Index (PDSI) has been calculated for about 30 years as a means of providing a single measure of meteorological drought severity. It was intended to retrospectively look at wet and dry conditions using water balance techniques. The Standardized Precipitation Index (SPI) is a probability index that was developed to give a better representation of abnormal wetness and dryness than the Palmer indices. Before the user community will accept the SPI as an alternative to the Palmer indices, a standard method must be developed for computing the index. Standardization is necessary so that all users of the index will have a common basis for both spatial and temporal comparison of index values. If different probability distributions and models are used to describe an observed series of precipitation, then different SPI values may be obtained. This article describes the effect on the SPI values computed from different probability models as well as the effects on dry event characteristics. It is concluded that the Pearson Type III distribution is the “best” universal model, and that the reliability of the SPI is sample size dependent. It is also concluded that because of data limitations, SPIs with time scales longer than 24 months may be unreliable. An internet link is provided that will allow users to access Fortran 77 source code for calculating the SPI.

ABSTRACT: The Palmer Drought Index (PDI) is used as an indicator of drought severity, and a particular index value is often the signal to begin or discontinue elements of a drought contingency plan. The Standardized Precipitation Index (SPI) was recently developed to quantify a precipitation deficit for different time scales. It was designed to be an indicator of drought that recognizes the importance of time scales in the analysis of water availability and water use.

This study compares historical time series of the PDI with time series of the corresponding SPI through spectral analysis. Results show that the spectral characteristics of the PDI vary from site to site throughout the U.S., while those of the SPI do not vary from site to site. They also show that the PDI has a complex structure with an exceptionally long memory, while the SPI is an easily interpreted, simple moving average process.

ABSTRACT: The concept of process domains is proposed as an alternative to the River Continuum Concept for the influence of geomorphic processes on aquatic ecosystems. Broadly defined, the Process Domain Concept is a multi‐scale hypothesis that spatial variability in geomorphic processes governs temporal patterns of disturbances that influence ecosystem structure and dynamics. At a coarse scale, regional climate, geolog vegetation, and topography control the suite of geomorphic processes that are distributed over a landscape. Within the broad context so defined, stream channel classification can guide identification of functionally similar portions of a channel network, but the response of otherwise similar reaches can depend upon their geologic and geomorphic context. Within geomorphic provinces defined by differences in topography, climate history, and tectonic setting, areas with generally similar geology and topography define lithotopo units, which are useful for stratifying different suites of dominant geomorphic processes. Process domains are spatially identifiable areas characterized by distinct suites of geomorphic processes, and the Process Domain Concept implies that channel networks can be divided into discrete regions in which community structure and dynamics respond to distinctly different disturbance regimes. The concepts of process domains and lithotopo units provide both a framework for the application of patch dynamics concepts to complex landscapes and a context for addressing the effects of watershed processes on the ecology of mountain drainage basins.

ABSTRACT: Suspended sediment causes a range of environmental damage, including benthic smothering, irritation of fish gills, and transport of sorbed contaminants. Much of the impact, while sediment remains suspended, is related to its light attenuation, which reduces visual range in water and light availability for photosynthesis. Thus measurement of the optical attributes of suspended matter in many instances is more relevant than measurement of its mass concentration. Nephelometric turbidity, an index of light scattering by suspended particles, has been widely used as a simple, cheap, instrumental surrogate for suspended sediment, that also relates more directly than mass concentration to optical effects of suspended matter. However, turbidity is only a relative measure of scattering (versus arbitrary standards) that has no intrinsic environmental relevance until calibrated to a ‘proper’ scientific quantity. Visual clarity (measured as Secchi or black disc visibility) is a preferred optical quantity with immediate environmental relevance to aesthetics, contact recreation, and fish habitat. Contrary to common perception, visual clarity measurement is not particularly subjective and is more precise than turbidity measurement. Black disc visibility is inter‐convertible with beam attenuation, a fundamental optical quantity that can be monitored continuously by beam transmissometry. Visual clarity or beam attenuation should supplant nephelometric turbidity in many water quality applications, including environmental standards.

ABSTRACT: This paper describes the application of a river basin scale hydrologic model (described in Part I) to Richland and Chambers Creeks watershed (RC watershed) in upper Trinity River basin in Texas. The inputs to the model were accumulated from hydro‐graphic and geographic databases and maps using a raster‐based GIS. Available weather data from 12 weather stations in and around the watershed and stream flow data from two USGS stream gauge station for the period 1965 to 1984 were used in the flow calibration and validation. Sediment calibration was carried out for the period 1988 through 1994 using the 1994 sediment survey data from the Richland‐Chambers lake. Sediment validation was conducted on a subwatershed (Mill Creek watershed) situated on Chambers Creek of the RC watershed. The model was evaluated by well established statistical and visual methods and was found to explain at least 84 percent and 65 percent of the variability in the observed stream flow data for the calibration and validation periods, respectively. In addition, the model predicted the accumulated sediment load within 2 percent and 9 percent from the observed data for the RC watershed and Mill Creek watershed, respectively.

ABSTRACT: Lake and watershed management strategies and recent environmental legislation dictate that nonpoht nutrient sources associated with storm water runoff must be assessed. Accordingly, a nutrient flu assessment for phosphorus and nitrogen is conducted through an extensive literature review of nutrient export studies. These studies are reevaluated. The nutrient export coefficients are screened according to sampling design criteria and compiled according to land use. The ecological mechanisms within each land use influencing the magnitude of nutrient flux are also discussed

ABSTRACT: A streamflow duration curve illustrates the relationship between the frequency and magnitude of streamflow. Flow duration curves have a long history in the field of water‐resource engineering and have been used to solve problems in water‐quality management, hydropower, instream flow methodologies, water‐use planning, flood control, and river and reservoir sedimentation, and for scientific comparisons of streamflow characteristics across watersheds. This paper reviews traditional applications and provides extensions to some new applications, including water allocation, wasteload allocation, river and wetland inundation mapping, and the economic selection of a water‐resource project.