International Journal of Metalcasting

Công bố khoa học tiêu biểu

* Dữ liệu chỉ mang tính chất tham khảo

Sắp xếp:  
Time Evolution of Solidification Structure in Ductile Cast Iron with Hypereutectic Compositions
International Journal of Metalcasting - Tập 14 - Trang 794-801 - 2020
Kiattisaksri Chatcharit, Akira Sugiyama, Kohei Morishita, Taka Narumi, Kentaro Kajiwara, Hideyuki Yasuda
The microstructure evolution in ductile cast iron with magnesium addition was observed in situ by using X-ray radiography (two-dimensional observation) and time-resolved tomography (three-dimensional observation) in the BL20XU of a synchrotron radiation facility, SPring-8 (Hyogo, Japan). In the two-dimensional observation, graphite nodules nucleated in the melt and floated up immediately after nuc...... hiện toàn bộ
Correction to: Gray Iron Aging Effects as Measured Using NDT and Microstructural Analysis
International Journal of Metalcasting - Tập 17 Số 2 - Trang 1128-1128 - 2023
James Cree
The Influence of Sr Addition on the Microstructure of A380 Alloy
International Journal of Metalcasting - Tập 11 - Trang 321-327 - 2016
Meng Wang, Wilson Xu, Qingyou Han
Whereas A380 series alloys are some of the most widely used aluminum alloys, iron can severely degrade the ductility of an Al–Si die-casting alloy because its presence leads to the precipitation of different AlFeSi intermetallic phases resulting in development of stress concentrations. Thus, controlling the fraction and morphology of AlFeSi phase, especially the β-AlFeSi phase, is an important way...... hiện toàn bộ
Effects of Melt-Constrained Flow-Induced Nucleation Channel Length on Temperature Field and Microstructure of CuSn10P1 Alloy Semi-Solid Slurry
International Journal of Metalcasting - - 2022
Wentao Xiong, Rongfeng Zhou, Zhangxing Liu, Xinhua Yin, Ke Wen, Zhenze Zhu, Yongkun Li
With the increasing use of metal semi-solid forming technology in the production of high-quality copper alloy parts, foundational research on the robust preparation of copper alloy semi-solid slurry as key components and foundation of copper alloy semi-solid parts is critical. Therefore, based on the explosive nucleation theory and the 3D-CAFE method, the effects of the length of the melt-constrai...... hiện toàn bộ
Effect of Solidification Time on Microstructure, Wettability, and Corrosion Properties of A205-T7 Aluminum Alloys
International Journal of Metalcasting - Tập 15 Số 1 - Trang 2-12 - 2021
Amir Kordijazi, David Weiss, Sourav Das, Swaroop Behera, Hathibelagal M. Roshan, Pradeep K. Rohatgi
High Temperature and Lubricating Wear Behaviour of In-Situ Al-20Mg2Si Composite
International Journal of Metalcasting -
Rahul Bhandari, Prosanta Biswas, Manab Mallik, Manas Kumar Mondal
Effect of Ablation Casting Process on the Microstructural Parameters and Tensile Properties of A413 and A356 Alloys
International Journal of Metalcasting - - Trang 1-14 - 2023
Mostafa Arabpour, Seyed Mohammad Ali Boutorabi, Hasan Saghafian
The process of ablation casting (AC) is a novel sand casting technique that not only offers the benefits of conventional sand casting (CSC), but also offers opportunities to overcome some of its shortcomings. In this research, A413 and A356 alloys were cast via CSC and AC processes. The CSC simulation process showed that the solid fraction parameter at different times indicated A413 to be more sui...... hiện toàn bộ
Effect of TiO2 and SiC Nanoparticles on the Microstructure and Mechanical Characteristics of AA7178 Metal Matrix Composite
International Journal of Metalcasting - Tập 17 - Trang 2849-2861 - 2023
Nikhil Bharat, P. S. C. Bose
The purpose of this study was to explore the effect that stir casting has on a TiO2 and SiC nanoparticles reinforced aluminium matrix composite. In order to study the development of ceramic particle reinforced aluminium matrix composite, density, tensile strength, hardness, and fracture analyses were carried out. The scanning electron microscope (SEM) investigation showed that the reinforcement pa...... hiện toàn bộ
Ceramic Foam Filter Micropores as Sites for Liquid Inclusion Retention
International Journal of Metalcasting - - 2022
Suman Chakraborty, Ronald J. O’Malley, Laura Bartlett
Research on Surface Coating Treatment of Casting Die for Copper Alloy Water-Meter Shell
International Journal of Metalcasting - Tập 17 - Trang 922-934 - 2022
Kai-Kui Zheng, You-Xi Lin, Sheng-Qing Yan, Wei-Ping Chen
In the production process of copper alloy metal mold casting, the surface of the mold cavity must bear the effects of erosion wear and thermal stress of high-temperature liquid metal, resulting in fatigue cracks and erosion corrosion on the mold surface, which seriously affects the service life of the mold. To address the problems of short mold life and poor surface quality of castings in the cast...... hiện toàn bộ
Tổng số: 1,011   
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 10