Scale effects on double-screw granular mixing
Tài liệu tham khảo
Bridgwater, 2012, Mixing of powders and granular materials by mechanical means—a perspective, Particuology, 10, 397, 10.1016/j.partic.2012.06.002
Mohan, 2006, Pyrolysis of wood/biomass for bio-oil: a critical review, Energy Fuel, 20, 848, 10.1021/ef0502397
Ottino, 2001, Fundamental research in heaping, mixing, and segregation of granular materials: challenges and perspectives, Powder Technol., 121, 117, 10.1016/S0032-5910(01)00361-8
Weinekötter, 2000
McCarthy, 2009, Turning the corner in segregation, Powder Technol., 192, 137, 10.1016/j.powtec.2008.12.008
Pernenkil, 2006, A review on the continuous blending of powders, Chem. Eng. Sci., 61, 720, 10.1016/j.ces.2005.06.016
Hogg, 2009, Mixing and segregation in powders: evaluation, mechanisms and processes, KONA Powder and Particle Journal, 27, 3, 10.14356/kona.2009005
Conway, 2005, Granular flow and segregation in a four-bladed mixer, Chem. Eng. Sci., 60, 7091, 10.1016/j.ces.2005.03.008
Hsiau, 2002, Density effect of binary mixtures on the segregation process in a vertical shaker, Adv. Powder Technol., 13, 301, 10.1163/156855202320252462
Tsai, 1994, On the mixing of granular materials in a screw feeder, Powder Technol., 80, 119, 10.1016/0032-5910(94)02839-7
Uchida, 2006, Measurement of powder flow in a screw feeder by X-ray penetration image analysis, Meas. Sci. Technol., 17, 419, 10.1088/0957-0233/17/2/025
Ottino, 2000, Mixing and segregation of granular materials, Annu. Rev. Fluid Mech., 32, 55, 10.1146/annurev.fluid.32.1.55
Campbell, 1990, Rapid granular flows, Annu. Rev. Fluid Mech., 22, 57, 10.1146/annurev.fl.22.010190.000421
Rahmanian, 2008, Scale-up of high-shear mixer granulators, KONA Powder and Particle Journal, 26, 190, 10.14356/kona.2008017
Mort, 2009, Scale-up and control of binder agglomeration processes—flow and stress fields, Powder Technol., 189, 313, 10.1016/j.powtec.2008.04.022
Yijie, 2013, Scale-up strategy for continuous powder blending process, Powder Technol., 235, 55, 10.1016/j.powtec.2012.09.036
Paul, 2004
Ingram, 2007, Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils, Energy Fuel, 22, 614, 10.1021/ef700335k
Brown, 2011
Bahng, 2009, Current technologies for analysis of biomass thermochemical processing: a review, Anal. Chim. Acta, 651, 117, 10.1016/j.aca.2009.08.016
Kingston, 2015, Characterizing 3D granular flow structures in a double screw mixer using X-ray particle tracking velocimetry, Powder Technol., 278, 211, 10.1016/j.powtec.2015.02.061
Marmur, 2015, 307
Marmur, 2016, Effect of particle size, density, and concentration on granular mixing in a double screw pyrolyzer, Powder Technol., 302, 222, 10.1016/j.powtec.2016.08.040
Bridgwater, 2007, The production of biofuels and renewable chemicals by fast pyrolysis of biomass, International Journal of Global Energy Issues, 27, 160, 10.1504/IJGEI.2007.013654
Kingston, 2013, 476
Colijn, 1985
Allen, 1997
Devore, 2014
Salkind, 2010
2006
Alexander, 2004, Effects of scale and inertia on granular banding segregation, Granul. Matter, 5, 171, 10.1007/s10035-003-0141-y
Arntz, 2014, Segregation of granular particles by mass, radius, and density in a horizontal rotating drum, AICHE J., 60, 50, 10.1002/aic.14241