Process optimization of an auger pyrolyzer with heat carrier using response surface methodology

Abnisa, 2011, Optimization and characterization studies on bio-oil production from palm shell by pyrolysis using response surface methodology, Biomass and Bioenergy, 35, 3604, 10.1016/j.biombioe.2011.05.011

Antal, 2003, The art, science, and technology of charcoal production, Ind. Eng. Chem. Res., 42, 1619, 10.1021/ie0207919

Badger, 2006, Use of mobile fast pyrolysis plants to densify biomass and reduce biomass handling costs – a preliminary assessment, Biomass and Bioenergy, 30, 321, 10.1016/j.biombioe.2005.07.011

Bhattacharya, 2009, Wood/plastic copyrolysis in an auger reactor: chemical and physical analysis of the products, Fuel, 88, 1251, 10.1016/j.fuel.2009.01.009

Bridgwater, A.V., 2011. Review of fast pyrolysis of biomass and product upgrading. Biomass and Bioenergy, doi: 10.1016/j.biombioe.2011.01.048.

Bridgwater, 2005, The status of biomass fast pyrolysis

Bridgwater, 2000, Fast pyrolysis processes for biomass, Renewable and Sustainable Energy Reviews, 4, 1, 10.1016/S1364-0321(99)00007-6

Brown, J.N., 2009. Development of a lab-scale auger reactor for biomass fast pyrolysis and process optimization using response surface methodology. M.S. thesis, Iowa State University, Ames, IA.

Camp, 1990

Camp, 1991

Garcia-Perez, 2007, Production and fuel properties of pine chip bio-oil/biodiesel blends, Energy and Fuels, 21, 2363, 10.1021/ef060533e

Ghosh, 2010, Response surface methodology for process parameter optimization of hydrogen yield by the metabolically engineered strain Escherichia coli DJT135, Bioresource Technology, 101, 1820, 10.1016/j.biortech.2009.10.020

Hassan, 2009, The potential use of whole-tree biomass for bio-oil fuels, Energy Sources: Part A, 31, 1829, 10.1080/15567030802463364

Henrich, 2009, Cost estimate for biosynfuel production via biosyncrude gasification, Biofuels Bioproducts Biorefining, 3, 28, 10.1002/bbb.126

Hill, 1966, A review of response surface methodology: a literature survey, Technometrics, 8, 571, 10.2307/1266632

Hulet, C., et al., 2005. A review of short residence time cracking processes. International Journal of Chemical Reactor Engineering, 3, Review R1.

Ingram, 2008, Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils, Energy and Fuels, 22, 614, 10.1021/ef700335k

Kuehl, 2000

Lakshmanan, 1969, Production of levoglucosan by pyrolysis of carbohydrates, I&EC Product Research and Development, 8, 261, 10.1021/i360031a010

Laucks, 1927, The screw as a carbonizing machine, Industrial and Engineering Chemistry, 19, 8, 10.1021/ie50205a004

Lin, 1997, Coal desulfurization by mild pyrolysis in a dual-auger coal feeder, Fuel Processing Technology, 53, 15, 10.1016/S0378-3820(97)00008-8

Marikh, 2005, Experimental study of the stirring conditions taking place in a pilot plant continuous mixer of particulate solids, Powder Technology, 157, 138, 10.1016/j.powtec.2005.05.020

Mohan, 2006, Pyrolysis of wood/biomass for bio-oil: a critical review, Energy and Fuels, 20, 848, 10.1021/ef0502397

Mohan, 2007, Sorption of arsenic, cadmium, and lead by chars produced from fast pyrolysis of wood and bark during bio-oil production, Colloid and Interface Science, 310, 57, 10.1016/j.jcis.2007.01.020

Pernenkil, 2006, A review on the continuous blending of powders, Chem. Eng. Sci., 61, 720, 10.1016/j.ces.2005.06.016

Probstein, 2006

Puy, 2011, Valorisation of forestry waste by pyrolysis in an auger reactor, Waste Manag., 31, 1339, 10.1016/j.wasman.2011.01.020

Raffelt, 2006, The BTL2 process of biomass utilization entrained flow gasification of pyrolyzed biomass slurries, Appl. Biochem. Biotechnol., 129, 153, 10.1385/ABAB:129:1:153

Sahu, 2010, Optimization of production conditions for activated carbons from Tamarind wood by zinc chloride using response surface methodology, Bioresource Technol., 101, 1974, 10.1016/j.biortech.2009.10.031

Schnitzer, 2006, The conversion of chicken manure to biooil by fast pyrolysis I. Analyses of chicken manure, biooils and char by 13C and 1H NMR and FTIR spectrophotometry, Environ. Sci. Health: Part B, 42, 71, 10.1080/03601230601020894

Thangalazhy-Gopakumar, 2010, Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactor, Bioresource Technol., 101, 8389, 10.1016/j.biortech.2010.05.040

Tobias, P., Trutna, L., 2005. NIST/SEMATECH e-Handbook for Statistical Methods. Chap. 5, Process Improvement. Web page URL: <http://www.itl.nist.gov/div898/handbook> (accessed 3.8.2009).

Woody, 1941, Production of coke as a domestic fuel source. The Hayes process for carbonizing coal at low temperatures, Indust. Eng. Chem., 33, 841, 10.1021/ie50379a004

Wright, 2010, Techno-economic analysis of biomass fast pyrolysis to transportation fuels, Fuel, 89, S2, 10.1016/j.fuel.2010.07.029

Ziegler, 2003, Residence time distribution in a co-rotating, twin screw continuous mixer by the step change method, J. Food Eng., 59, 161, 10.1016/S0260-8774(02)00453-3