Scale-up of binder agglomeration processes

Mort, 1999, Scale-up of agglomeration processes using transformations, Kona, 17, 64, 10.14356/kona.1999013 Mort, 1998, Dimensional analysis of agglomeration: scale-up using transformations, Proc. World Congr. Part. Technol., 3 Mort, 2001, Control of agglomerate attributes in a continuous agglomeration process, Powder Technol., 117, 173, 10.1016/S0032-5910(01)00323-0 Ennis, 1997, Size reduction and size enlargement W. Pietsch, Agglomeration Processes: Phenomena, Technologies, Equipment. Wiley-VCH, Verlag, Weinheim, 2002. Sastry, 1973, Mechanisms of agglomerate growth in green pelletization, Powder Technol., 7, 97, 10.1016/0032-5910(73)80012-9 Iveson, 2001, Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review, Powder Technol., 117, 3, 10.1016/S0032-5910(01)00313-8 Schaefer, 1996, Melt pelletization in a high shear mixer: VII. Effects of binder viscosity, Int. J. Pharm., 139, 125, 10.1016/0378-5173(96)04549-8 Watano, 1995, Scale up of agitation fluidized bed granulation, Parts I-IV, Chem. Pharm. Bull., 43 Knight, 1998, An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration, Powder Technol., 97, 246, 10.1016/S0032-5910(98)00031-X Newitt, 1958, A contribution to the theory and practice of granulation, Trans. Inst. Chem. Eng., 36, 422 Kristensen, 1995, Particle agglomeration, 10.1016/S0065-3136(06)80006-3 Schaafsma, 1998, Description of agglomerate growth, Powder Technol., 97, 183, 10.1016/S0032-5910(97)03399-8 Schaefer, 1996, Melt pelletization in a high shear mixer: IX. Effects of binder particle size, Int. J. Pharm., 139, 10.1016/0378-5173(96)04548-6 Litster, 2002, Scale-up of mixer granulators for effective liquid distribution, Powder Technol., 124, 272, 10.1016/S0032-5910(02)00023-2 K.P. Hapgood, Nucleation and Binder Dispersion in Wet Granulation. The University of Queensland, PhD Thesis, 2000. Ennis, 1991, A microlevel-based characterization of granulation phenomena, Powder Technol., 65, 257, 10.1016/0032-5910(91)80189-P Mort, 1994, Hierarchically ordered particle mixtures by thermally-triggered granulation, Kona, 12, 111, 10.14356/kona.1994018 Ouchiyama, 1975, The probability of coalescence in granulation kinetics, Ind. Eng. Chem. Process Des. Dev., 14, 286, 10.1021/i260055a016 Kristensen, 1985, Granulation in high-speed mixers, Part VI. Effects of process conditions on power consumption and granule growth, Powder Technol., 43, 225, 10.1016/0032-5910(85)80003-6 Iveson, 1996, Fundamental studies of granule consolidation, Part 1: Effects of binder content and binder viscosity, Powder Technol., 88, 15, 10.1016/0032-5910(96)03096-3 Iveson, 1998, Growth regime map for liquid-bound granules, AIChE J., 44, 1510, 10.1002/aic.690440705 Iveson, 2003, The importance of wet-powder dynamic mechanical properties in understanding granulation, Powder Technol., 130, 97, 10.1016/S0032-5910(02)00233-4 Tardos, 1997, Critical parameters and limiting conditions in binder granulation of fine powders, Powder Technol., 94, 245, 10.1016/S0032-5910(97)03321-4 Rumpf, 1962, The strength of granules and agglomerates, 379 Tardos, 2004, Stress measurements in high shear granulators using calibrated ‘test’ particles: application to scale-up, Powder Technol., 140, 217, 10.1016/j.powtec.2004.01.015 van den Dries, 2003, Granule breakage phenomena in a high shear mixer; influence of process and formulation variables and consequences on granule homogeneity, Powder Technol., 133, 228, 10.1016/S0032-5910(03)00106-2 Verkoeijen, 2002, Determining granule strength as a function of moisture content, Powder Technol., 124, 195, 10.1016/S0032-5910(02)00019-0 Beekman, 2003, Failure mechanism determination for industrial granules using a repeated compression test, Powder Technol., 130, 367, 10.1016/S0032-5910(02)00238-3 Samimi, 2003, Effect of structural characteristics on impact breakage of agglomerates, Powder Technol., 130, 428, 10.1016/S0032-5910(02)00246-2 Schaefer, 1992, Melt pelletization in a high shear mixer: II. Power consumption and granule growth, Acta Pharm. Nord., 4 Holm, 1985, Granulation in high-speed mixers: Part VI. Effects of process conditions on power consumption and granule growth, Powder Technol., 43, 225, 10.1016/0032-5910(85)80003-6 Kristensen, 1987, A review on pharmaceutical wet granulation, Drug Dev. Ind. Pharm., 13, 803, 10.3109/03639048709105217 Leuenberger, 2001, New trends in the production of pharmaceutical granules: the classical batch concept and the problem of scale-up, Eur. J. Pharm. Biopharm., 52, 279, 10.1016/S0939-6411(01)00200-4 Faure, 2001, Process control and scale-up of pharmaceutical wet granulation processes: a review, Eur. J. Pharm. Biopharm., 52, 269, 10.1016/S0939-6411(01)00184-9 Talu, 2001, Use of stress fluctuations to monitor wet granulation of powders, Powder Technol., 117, 149, 10.1016/S0032-5910(01)00321-7 Landin, 1996, Scale up of a pharmaceutical granulation in two production scale fixed bowl mixer-granulators, Int. J. Pharm., 133, 10.1016/0378-5173(95)04427-2 Hancock, 1992, Characterization of wet masses using a mixer torque rheometer: 2. Mixing kinetics, Int. J. Pharm., 83, 147, 10.1016/0378-5173(82)90017-5 Delalone, 1996, The rheology of wet powders: as measuring instrument, the compresso-rheometer, Int. J. Pharm., 130, 147, 10.1016/0378-5173(96)84754-5 P. York, Personal Communication. 1997 (June). Faure, 1998, Mixer torque rheometry: relationships between wet mass consistency in pharmaceutical wet granulation processes and subsequent dry granule properties, Proc. World Congr. Part. Technol., 3 Cliff, 1990, Granulation end point and automated process control of mixer-granulators, Pharm. Technol., 112 Holm, 1985, Granulation in high-speed mixers: Part V. Power consumption and temperature changes during granulation, Powder Technol., 43, 213, 10.1016/0032-5910(85)80002-4 Kristensen, 1996, Particle agglomeration in high shear mixers, Powder Technol., 88, 197, 10.1016/S0032-5910(96)03123-3 Knight, 1993, An investigation of the kinetics of granulation using a high shear mixer, Powder Technol., 77, 159, 10.1016/0032-5910(93)80053-D Mackaplow, 2000, Effect of primary particle size on granule growth and endpoint determination in high-shear wet granulation, Powder Technol., 108, 32, 10.1016/S0032-5910(99)00203-X Somerville-Roberts, 2003, Product build-up in high-shear agglomeration systems Adams, 1996, Micromechanical analyses of the pressure-volume relationships for powders under confined uniaxial compression, Powder Technol., 88, 155, 10.1016/0032-5910(96)03117-8 Mort, 2001, Analysis and application of powder compaction diagrams Naito, 1998, Microscopic analysis on the consolidation process in granular beds, Powder Technol., 95, 214, 10.1016/S0032-5910(97)03340-8 Iveson, 2002, The dynamic strength of partially saturated powder compacts: the effect of liquid properties, Powder Technol., 127, 149, 10.1016/S0032-5910(02)00118-3 Schaefer, 1987, Granulation in different types of high shear mixers, Part 2: Comparisons between mixers, Pharm. Ind., 49, 297 Forrest, 2003, Flow patterns in granulating systems, Powder Technol., 130, 91, 10.1016/S0032-5910(02)00232-2 Litster, 2001, Liquid distribution in wet granulation: dimensionless spray flux, Powder Technol., 114, 32, 10.1016/S0032-5910(00)00259-X Hapgood, 2004, Dimensionless spray flux in wet granulation: Monte-Carlo simulations and experimental validation, Powder Technol., 141, 20, 10.1016/j.powtec.2004.02.005 Plank, 2003, Quantifying liquid coverage and powder flux in high-shear granulators, Powder Technol., 134, 223, 10.1016/S0032-5910(03)00171-2 Mort, 2003, A multi-scale approach to modeling and simulation of particle formation and handling processes Iveson, 2002, Limitations of one-dimensional population balance models of wet granulation processes, Powder Technol., 124, 219, 10.1016/S0032-5910(02)00026-8 Biggs, 2003, Coupling granule properties and granulation rates in high-shear granulation, Powder Technol., 130, 162, 10.1016/S0032-5910(02)00260-7