Optical visualization and composition analysis to quantify continuous granular mixing processes

Mohan, 2006, Pyrolysis of wood/biomass for bio-oil: a critical review, Energy Fuel, 20, 848, 10.1021/ef0502397 Bridgwater, 2003, Renewable fuels and chemicals by thermal processing of biomass, Chem. Eng. J., 91, 87, 10.1016/S1385-8947(02)00142-0 Bahng, 2009, Current technologies for analysis of biomass thermochemical processing: a review, Anal. Chim. Acta., 651, 117, 10.1016/j.aca.2009.08.016 Ingram, 2008, Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils, Energy Fuel, 22, 614, 10.1021/ef700335k Brown, 2012, Process optimization of an auger pyrolyzer with heat carrier using response surface methodology, Bioresour. Technol., 103, 405, 10.1016/j.biortech.2011.09.117 Bridgwater, 2012, Mixing of powders and granular materials by mechanical means — a perspective, Particuology, 10, 397, 10.1016/j.partic.2012.06.002 Yang, 2006, Density effect on mixing and segregation processes in a vibrated binary granular mixture, Powder Technol., 164, 65, 10.1016/j.powtec.2006.02.007 Siiria, 2009, Determining a value for mixing: mixing degree, Powder Technol., 196, 309, 10.1016/j.powtec.2009.08.009 Uchida, 2006, Measurement of powder flow in a screw feeder by X-ray penetration image analysis, Meas. Sci. Technol., 17, 419, 10.1088/0957-0233/17/2/025 Vanarase, 2011, Effect of operating conditions and design parameters in a continuous powder mixer, Powder Technol., 208, 26, 10.1016/j.powtec.2010.11.038 Brown, 2009, Development of a lab-scale auger reactor for biomass fast pyrolysis and process optimization using response surface methodology, 260 Gao, 2011, Characterizing continuous powder mixing using residence time distribution, Chem. Eng. Sci., 66, 417, 10.1016/j.ces.2010.10.045 Portillo, 2009, Effects of rotation rate, mixing angle, and cohesion in two continuous powder mixers — a statistical approach, Powder Technol., 194, 217, 10.1016/j.powtec.2009.04.010 Tsai, 1994, On the mixing of granular materials in a screw feeder, Powder Technol., 80, 119, 10.1016/0032-5910(94)02839-7 Colijn, 1985 Allen, 1996 Ku, 1966, Notes on use of propagation of error formulas, J. Res. Natl. Bur. Stand. Sec. C: Eng. Inst., C70, 263 DeVore, 2008 Uchida, 2008, Measurement technique on the diffusion coefficient of powder flow in a screw feeder by X-ray visualization, Powder Technol., 187, 138, 10.1016/j.powtec.2008.02.005