Numerical and experimental investigation of a planing Air Cavity Ship and its air layer evolution

Ahmadzadehtalatapeh, 2016, A review on the drag reduction methods of the ship hulls for improving the hydrodynamic performance, Int. J. Market. Technol., 4, 51

Amromin, 2016, Analysis of interaction between ship bottom air cavity and boundary layer, Appl. Ocean Res., 59, 451, 10.1016/j.apor.2016.03.009

Barbaca, 2017, Numerical analysis of ventilated cavity flow over a 2-D wall mounted fence, Ocean Eng., 141, 143, 10.1016/j.oceaneng.2017.06.018

Butterworth, 2015, Experimental analysis of an air cavity concept applied on a ship hull to improve the hull resistance, Ocean Eng., 110, 2, 10.1016/j.oceaneng.2015.10.022

Ceccio, 2010, Friction drag reduction of external flows with bubble and gas injection, Annu. Rev. Fluid Mech., 42, 183, 10.1146/annurev-fluid-121108-145504

Cucinotta, 2017, Life cycle assessment in yacht industry: a case study of comparison between hand lay-up and vacuum infusion, J. Clean. Prod., 142, 3822, 10.1016/j.jclepro.2016.10.080

Cucinotta, 2017, An experimental comparison between different artificial air cavity designs for a planing hull, Ocean Eng., 140, 233, 10.1016/j.oceaneng.2017.05.028

Cucinotta, 2017, Numerical prediction of ventilated planing flat plates for the design of air cavity ships, Int. J. Interact. Des. Manuf.

De Marco, 2017, Experimental and numerical hydrodynamic analysis of a stepped planing hull, Appl. Ocean Res., 64, 135, 10.1016/j.apor.2017.02.004

Deng, 2002, Special treatment of pressure correction based on continuity conservation in a pressure-based algorithm, Numer. Heat Tran. Part B Fundam., 42, 73, 10.1080/10407790190053842

Elbing, 2013, On the scaling of air layer drag reduction, J. Fluid Mech., 717, 484, 10.1017/jfm.2012.588

Ferrante, 2004, On the physical mechanisms of drag reduction in a spatially developing turbulent boundary layer laden with microbubbles, J. Fluid Mech., 503, 345, 10.1017/S0022112004007943

Ghassabzadeh, 2013, An innovative method for parametric design of planing tunnel vessel Hull form, Ocean Eng., 60, 14, 10.1016/j.oceaneng.2012.11.015

Gokcay, 2004, Revisiting artificial air cavity concept for high speed craft, Ocean Eng., 31, 253, 10.1016/j.oceaneng.2003.05.002

Kostas, 2015, Ship-hull shape optimization with a T-spline based BEM–isogeometric solver, Comput. Meth. Appl. Mech. Eng., 284, 611, 10.1016/j.cma.2014.10.030

Matveev, 2015, Hydrodynamic modeling of semi-planing hulls with air cavities, Int. J. Nav. Archit. Ocean Eng., 7, 500, 10.1515/ijnaoe-2015-0036

Matveev, 2003, On the limiting parameters of artificial cavitation, Ocean Eng., 30, 1179, 10.1016/S0029-8018(02)00103-8

Pearce, 2015, Ventilated cavity flow over a backward-facing step, J. Phys. Conf., 656, 12164, 10.1088/1742-6596/656/1/012164

Richardson, 1911, The approximate arithmetical solution by finite differences of physical problems involving differential equations, with an application to the stresses in a Masonry dam, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 210, 307, 10.1098/rsta.1911.0009

Schultz, 2007, Effects of coating roughness and biofouling on ship resistance and powering, Biofouling, 23, 331, 10.1080/08927010701461974

Slyozkin, 2014, An experimental investigation into the hydrodynamic drag reduction of a flat plate using air-fed cavities, Ocean Eng., 76, 105, 10.1016/j.oceaneng.2013.10.013

Stenzel, 2011, Drag-reducing paints for the reduction of fuel consumption in aviation and shipping, Prog. Org. Coating, 70, 224, 10.1016/j.porgcoat.2010.09.026

Stern, 2001, Comprehensive approach to verification and validation of CFD simulations—part 1: methodology and procedures, J. Fluid Eng., 123, 793, 10.1115/1.1412235

Stüben, 2001, A review of algebraic multigrid, J. Comput. Appl. Math., 128, 281, 10.1016/S0377-0427(00)00516-1

Wilcox, 2008, Formulation of the k-w turbulence model revisited, AIAA J., 46, 2823, 10.2514/1.36541

Winebrake, 2007, Energy use and emissions from marine vessels: a total fuel life cycle approach, J. Air Waste Manag. Assoc., 57, 102, 10.1080/10473289.2007.10465301