Intensified carbon capture using adsorption: Heat transfer challenges and potential solutions

Thermal Science and Engineering Progress - Tập 8 - Trang 17-30 - 2018
Jonathan R. McDonough1, Richard Law1, David A. Reay1, Vladimir Zivkovic1
1School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK

Tài liệu tham khảo

Proceedings of the Committee on Climate Change. https://www.theccc.org.uk/tackling-climate-change/the-legal-landscape/european-union-legislation/ (Accessed 4 April 2017).

Dickinson, 2016, Oxidative degradation of amine absorbents in carbon capture systems – a dynamic modelling approach, Int. J. Greenhouse Gas Control, 53, 391, 10.1016/j.ijggc.2016.08.001

Reay, 2013, Intensification of separation processes, 205

Thakur, 2011, Process intensification in duplex pressure swing adsorption, Comput. Chem. Eng., 35, 973, 10.1016/j.compchemeng.2011.01.024

EPSRC Grant No. EP/N024540/1 Novel Adsorbent Applied to Integrated Energy-efficient Industrial CO2 Capture.

Kaewklum, 2010, Experimental studies on a novel swirling fluidized-bed combustor using an annular spiral air distributor, Fuel, 89, 43, 10.1016/j.fuel.2009.07.027

www.torftech.com Web site of Torftech – manufacturers of the Torbed toroidal fluidized bed system. (Accessed 20 April 2017).

Gray, 2008, Performance of immobilized tertiary amine solid sorbents for the capture of carbon dioxide, Int. J. Greenhouse Gas Control, 2, 3, 10.1016/S1750-5836(07)00088-6

Newey, 1983, The development of a novel fluidized bed gas-gas heat exchanger, Heat Recovery Syst., 3, 35, 10.1016/0198-7593(83)90097-8

Rackley, 2017, Carbon capture and storage

IPCC (2014). IPCC fifth assessment report: Mitigation of climate change. Intergovernmental Panel on Climate Change.

Element Energy, Imperial College London, Ecofys, Stevenson P, Hyde, R (2014) The potential recovering and using surplus heat from industry: Final Report & Appendices for DECC.

LaMarche, 2016, Linking micro-scale predictions of capillary forces to macro-scale fluidization experiments in humid environments, AIChE J., 62, 3585, 10.1002/aic.15281

Schneider, 2008

Wiley, 2011, Assessment of opportunities for CO2 capture at iron and steel mills: an Australian perspective, Energy Procedia, 4, 2654, 10.1016/j.egypro.2011.02.165

Griffin, 2014, Prospects for emissions reduction in the UK cement sector, Proc. Inst. Civ. Eng. Energy, 167, 152

Sharma, 2008, Synthesis and characterization of Mg-Al-CO3 layered double hydroxide for CO2 adsorption, Ind. Eng. Chem. Res., 47, 9588, 10.1021/ie800365t

Dębek, 2017, A short review on the catalytic activity of hydrotalcite-derived materials for dry reforming of methane, Catalysts, 7, 32, 10.3390/catal7010032

Kim, 2016, High-temperature CO2 sorption on hydrotalcite having a high Mg/Al molar ratio, Appl. Mater. Interfaces, 8, 5763, 10.1021/acsami.5b12598

Gomes, 2015, Choosing amine-based absorbents for CO2 capture, Environ. Technol., 36, 19, 10.1080/09593330.2014.934742

Yong, 2002, Hydrotalcite-like compounds as adsorbents for carbon dioxide, Energy Convers. Manage., 43, 1865, 10.1016/S0196-8904(01)00125-X

White MG, Iretskii AV, Weigel JS, Chiang RL, Brzozowski JR. International Patent No. WO2004/000440 A1, 31 December 2003.

Oliveira, 2008, CO2 sorption on hydrotalcite and alkali-modified (K and Cs) hydrotalcites at high temperatures, Sep. Purif. Technol., 62, 137, 10.1016/j.seppur.2008.01.011

Wang, 2010, The effect of trivalent cations on the performance of Mg-M-CO3 layered double hydroxides for high-temperature CO2 capture, ChemSusChem, 3, 965, 10.1002/cssc.201000099

Wang, 2011, High temperature adsorption of CO2 on Mg-Al hydrotalcite: effect of the charge compensating anions and the synthesis pH, Catal. Today, 164, 198, 10.1016/j.cattod.2010.10.042

Hanif, 2014, A study on high temperature CO2 capture by improved hydrotalcite sorbents, Chem. Eng. J., 236, 91, 10.1016/j.cej.2013.09.076

Tichit, 2002, Comparison of the structural and acid-based properties of Ga- and Al-containing layered double hydroxides obtained by microwave irradiation and conventional ageing of synthesis gels, J. Mater. Chem., 12, 3832, 10.1039/B203376N

Webley, 2014, Adsorption technology for CO2 separation and capture: a perspective, Adsorption, 20, 225, 10.1007/s10450-014-9603-2

Berger, 2017, A novel rapid temperature swing adsorption post-combustion CO2 capture process using a sorbent polymer composite, Energy Procedia, 114, 2193, 10.1016/j.egypro.2017.03.1356

MacDowell, 2010, An overview of CO2 capture technologies, Energy Environ. Sci., 3, 1645, 10.1039/c004106h

Lively, 2009, Hollow Fiber Adsorbents for CO2 Removal from Flue Gas, Ind. Eng. Chem. Res., 48, 7314, 10.1021/ie9005244

Groszek M, Laughlin B (n.d.) Process Reactor Technologies [Online]. Torftech Ltd. White Paper available at: http://www.torftech.com/publications.html.

Lakshmanan, 1998, An innovative gas-solid Torbed reactor for the recycling industries, JOM, 50, 29, 10.1007/s11837-998-0189-6

Sreenivasan, 2002, Hydrodynamics of a swirling fluidized bed, Chem. Eng. Process., 41, 99, 10.1016/S0255-2701(00)00155-0

Sheng, 2012, One-dimensional modeling of hydrodynamics in a swirling fluidized bed, Int. J. Mech. Mechatronics Eng., 12, 13

Kaewklum, 2009, Hydrodynamics of air-sand flow in a conical swirling fluidized bed: a comparative study between tangential and axial air entries, Energy Convers. Manage., 50, 2999, 10.1016/j.enconman.2009.07.019

Shu, 2000, Hydrodynamic study of a toroidal fluidized bed reactor, Chemical Engineering and Processing, 39, 10.1016/S0255-2701(00)00097-0

Kuprianov, 2011, Effects of operating conditions and fuel properties on emission performance and combustion efficiency of a swirling fluidized-bed combustor fired with a biomass fuel, Energy, 36, 2038, 10.1016/j.energy.2010.05.026

Zhu, 2005, Co-combustion performance of poultry wastes and natural gas in the advanced swirling fluidized bed combustor (SFBC), Waste Manage., 25, 511, 10.1016/j.wasman.2004.09.003

McQueen MT (2003) Energy and high surface area siliceous ash from the combustion of rice hills, in: 17th International Fluidized Bed Combustion Conference, Jacksonville, Florida, US.

Sundaram, 2016, Experimental performance investigation of swirling flow enhancement on fluidized bed dryer, J. Eng. Appl. Sci., 11, 12529

Dodson CE, Lakshmanan VI, Laughlin RGW, Sridhar R, ORTECH Corporation (1999) Flash roasting of sulphide concentrates and leach residues using a Torbed reactor. Available at: http://www.torftech.com/pdf/Flash%20roasting%20of%20sulphide%20concentrates%20TMS%201999.pdf.

Farrell, 1993

Lee, 2003, Effects of temperature distribution on the catalytic pyrolysis of polystyrene waste in a swirling fluidized-bed reactor, Catal. Today, 79–80, 453, 10.1016/S0920-5861(03)00060-9

Dodson, 1999, Torbed® reactor successfully treats PAH-contaminated soils., Tech. Resour., 17, 1.23

Pirklbauer, 2018, Impact of stage configurations, lean-rich heat exchange and regeneration agents on the energy demand of a multistage fluidized bed TSA CO2 capture process, Int. J. Greenhouse Gas Control, 72, 82, 10.1016/j.ijggc.2018.03.018

Holm EL, Clausen JC (1988) Fluidized bed reactor and process for the operation of a fluidized bed reactor US Patent No. 4,788,919, Denmark Fluidized bed reactor and process for the operation of a fluidized bed reactor. US Patent.

Roy, 2009, Multistage fluidized bed reactor performance characterization for adsorption of carbon dioxide, Ind. Eng. Chem. Res., 48, 10718, 10.1021/ie901133r

UK Patent Specification 1500231 (1978). Improvements in or relating to heat exchangers. Inventors: Douglas Ernest Elliot and Michael John Virr, Patent filed 30 April 1974.

Lu, 2011, Heat transfer characteristics in a horizontal swirling fluidized bed, Exp. Therm. Fluid Sci., 35, 1127, 10.1016/j.expthermflusci.2011.03.007

Zabrodsky, 1981, Heat transfer in a large-particle fluidized bed with immersed in-line and staggarered bundles of horizontal smooth tubes, Int. J. Heat Mass Transfer, 24, 571, 10.1016/0017-9310(81)90002-8

C. Ramshaw, et al., Process Optimisation, p41 et seq., IChemE Symposium Series 100, Rugby, UK, 1987.

Botterill, 1984, Factors affecting heat transfer between gas-fluidized beds and immersed surfaces, Powder Technol., 39, 177, 10.1016/0032-5910(84)85035-4

Hofer, 2018, Investigating wall-to-bed heat transfer in view of a continuous temperature swing adsorption process, Fuel Process. Technol., 169, 157, 10.1016/j.fuproc.2017.09.024

Xavier, 1978

Yusuf, 2012, An experimental and computational study of wall to bed heat transfer in a bubbling gas-solid fluidized bed, Int. J. Multiphase Flow, 42, 9, 10.1016/j.ijmultiphaseflow.2012.01.003

Patil, 2006, Wall-to-bed heat transfer in gas-solid bubbling fluidized beds, AIChE J., 52, 58, 10.1002/aic.10590

Zhang, 2014, Wall-to-bed heat transfer at minimum gas-solid fluidization, J. Powder Technol., 2014, 10.1155/2014/163469

Sulaiman, 2016, Particle image velocimetry of a S9irling fluidized bed at different blade angles, Chem. Eng. Technol., 39, 1151, 10.1002/ceat.201500074

Farrell, 1993

Baskakov, 1973, Heat transfer to objects immersed in fluidized beds, Powder Technol., 8, 273, 10.1016/0032-5910(73)80092-0

Flamant, 1992, Wall-to-bed heat transfer in gas-solid fluidized beds: prediction of heat transfer regimes, Powder Technol., 69, 223, 10.1016/0032-5910(92)80013-M

Groszek, 2016, Introduction to the TORBED Technology and its role in Process Intensification

Daud, 2008, Fluidized bed dryers – recent advances, Adv. Powder Technol., 19, 403, 10.1016/S0921-8831(08)60909-7

Coenen, 2017, On the influence of steam on the CO2 chemisorption capacity of a hydrotalcite-based adsorbent for SEWGS applications, Chem. Eng. J., 314, 554, 10.1016/j.cej.2016.12.013

Wood J, Rong Y, Wang J (2014) Studies of hydrotalcite clays for CO2 adsorption. UKCCSRC Biannual Meeting, Cambridge, UK.

Romdhana, 2015, Superheated steam drying: an overview of pilot and industrial dryers with a focus on energy efficiency, Dry. Technol, 33, 10, 10.1080/07373937.2015.1025139

Li, 2016, Superheated steam drying: design aspects, energetic performances, and mathematical modelling, Renewable Sustainable Energy Rev., 60, 1562, 10.1016/j.rser.2016.03.033

Bains, 2017, CO2 capture from the industry sector, Progress Energy Combust. Sci., 63, 146, 10.1016/j.pecs.2017.07.001

IEA Greenhouse Gas R&D Programme (IEA GHG) (2008) CO2 Capture in the Cement Industry, 2008/3.

SETIS (2013) Energy efficiency and CO2 reduction in the cement industry. European Commission.

Hassan, 2007, Techno-economic study of CO2 capture from an existing cement plant using MEA scrubbing, Int. J. Green Energy, 4, 197, 10.1080/01971520600873418

Griffin, 2014, Prospects for emissions reduction in the UK cement sector., Proc. Inst. Civ. Eng. Energy, 167, 152

Hammond, 2014, Heat recovery opportunities in UK industry, Appl. Energy, 116, 387, 10.1016/j.apenergy.2013.11.008

Khurana, 2002, Energy balance and cogeneration for a cement plant, Appl. Therm. Eng., 22, 485, 10.1016/S1359-4311(01)00128-4

Ho, 2013, Comparison of CO2 capture economics for iron and steel mills, Int. J. Greenhouse Gas Control, 19, 145, 10.1016/j.ijggc.2013.08.003

Carpenter, 2012

IEA, 2007

Bermúdez, 2013, An overview of novel technologies to valorise coke oven gas surplus, Fuel Process. Technolog., 110, 150, 10.1016/j.fuproc.2012.12.007

BCS Inc, Waste heat recovery: technology and opportunities in U.S. industry. Available from: www.eere.energy.gov. Washington, DC, USA, U.S. Department of Energy, Office of Energy, 2008.

Sivakumar, 2016, Fluidized bed drying of some agro products – a review, Renewable Sustainable Energy Rev., 61, 280, 10.1016/j.rser.2016.04.014

Thông tin
Thông tin xuất bản

Thermal Science and Engineering Progress

Tập 8

17-30

Thông tin tác giả