Experimental studies on a novel swirling fluidized-bed combustor using an annular spiral air distributor

Nieh, 1987, Particle flow pattern in the freeboard of a vortexing fluidized bed, Powder Technol, 50, 121, 10.1016/0032-5910(87)80049-9 Chyang, 2007, Emission of nitrogen oxides in a vortexing fluidized bed combustor, Fuel, 86, 234, 10.1016/j.fuel.2006.06.013 Zhu, 2005, Co-combustion performance of poultry wastes and natural gas in the advanced swirling fluidized bed combustor (SFBC), Waste Manage, 25, 511, 10.1016/j.wasman.2004.09.003 Lin, 1997, Evaluation of the combustion efficiency and emission of pollutants by coal particles in a vortexing fluidized bed, Combust Flame, 110, 163, 10.1016/S0010-2180(97)00059-X Wong, 2000, Experimental investigation into the incineration of wool scouring sludges in a novel rotating fluidised bed, J Hazard Mater, B73, 143, 10.1016/S0304-3894(99)00171-5 Shu, 2000, Hydrodynamic study of a toroidal fluidized bed reactor, Chem Eng Proc, 39, 499, 10.1016/S0255-2701(00)00097-0 De Wilde, 2008, Experimental investigation of a rotating fluidized bed in a static geometry, Powder Technol, 183, 426, 10.1016/j.powtec.2008.01.024 Nakamura, 2007, Numerical analysis of particle mixing in a rotating fluidized bed, Chem Eng Sci, 62, 3043, 10.1016/j.ces.2007.02.043 Madhiyanon, 2006, A novel cyclonic fluidized-bed combustor (Ψ-FBC): combustion and thermal efficiency, temperature distributions, combustion intensity, and emission of pollutants, Combust Flame, 146, 232, 10.1016/j.combustflame.2006.03.008 Shin, 2005, Combustion characteristics of paper mill sludge in a lab-scale combustor with internally cycloned circulating fluidized bed, Waste Manage, 25, 680, 10.1016/j.wasman.2004.12.016 Zhang, 1997, Comprehensive modelling of pulverized coal combustion in a vortex combustor, Fuel, 76, 123, 10.1016/S0016-2361(96)00187-1 Eiamsa-ard, 2008, Experimental investigation of combustion characteristics in a multi-staging vortex combustor firing rice husk, Int Commun Heat Mass Transfer, 35, 139, 10.1016/j.icheatmasstransfer.2007.06.009 Permchart, 2004, Emission performance and combustion efficiency of a conical fluidized-bed combustor firing various biomass fuels, Bioresour Technol, 92, 83, 10.1016/j.biortech.2003.07.005 Peng, 1997, Hydrodynamic characteristics of fluidization in liquid–solid tapered beds, Chem Eng Sci, 52, 2277, 10.1016/S0009-2509(97)00061-4 Jing, 2000, Fluidization of coarse particles in gas–solid conical beds, Chem Eng Proc, 39, 379, 10.1016/S0255-2701(99)00103-8 Kaewklum, 2008, Theoretical and experimental study on hydrodynamic characteristics of fluidization in air–sand conical beds, Chem Eng Sci, 63, 1471, 10.1016/j.ces.2007.11.033 Sreenivasan, 2002, Hydrodynamics of a swirling fluidised bed, Chem Eng Proc, 41, 99, 10.1016/S0255-2701(00)00155-0 Chyang, 2002, A study in the swirling fluidizing pattern, J Chem Eng Jpn, 35, 503, 10.1252/jcej.35.503 Nieh, 1992, Measurements of gas-particle flows and elutriation of an 18inch i.d. cold vortexing fluidized-bed combustion model, Powder Technol, 69, 139, 10.1016/0032-5910(92)85067-6 Madhiyanon, 2008, Cold flow behavior study in novel cyclonic fluidized bed combustor (Ψ-FBC), Energy Convers Manage, 49, 1202, 10.1016/j.enconman.2007.09.011 Basu P, Cen KF, Jestin L. Boilers and burners. New York: Springer; 2000. Janvijitsakul, 2008, Major gaseous and PAH emissions from a fluidized-bed combustor firing rice husk with high combustion efficiency, Fuel Process Technol, 89, 777, 10.1016/j.fuproc.2008.01.013 Chovichien N, Kuprianov VI, Kaewklum R. Hydrodynamics of a swirling fluidized bed in a conical prototype. Part 2: Experimental results for different rice husk–sand mixtures. In: Proc Int Conf Eng. Bangkok, Thailand: Applied Science and Technology; 2007, p. 850–3. Werther, 2000, Combustion of agricultural residues, Prog Energy Combust Sci, 26, 1, 10.1016/S0360-1285(99)00005-2 Winter, 1999, NO and N2O formation during the combustion of wood, straw, malt waste and peat, Bioresour Technol, 70, 39, 10.1016/S0960-8524(99)00019-X