On the influence of steam on the CO2 chemisorption capacity of a hydrotalcite-based adsorbent for SEWGS applications

UNFCCC, Report of the Conference of the Parties on its twenty-first session, held in Paris from 30 November to 13 December 2015, Unfccc, vol. 01192, no. February, 2015. F. Birol, Redrawing the Energy-Climate MAP: World Energy Outlook Special Report World Energy Outlook Special Report Paris, 2013, p. 134. Gazzani, 2013, CO2 capture in integrated gasification combined cycle with SEWGS – Part A: thermodynamic performances, Fuel, 105, 206, 10.1016/j.fuel.2012.07.048 Boon, 2016, Comparison of the efficiency of carbon dioxide capture by sorption-enhanced water–gas shift and palladium-based membranes for power and hydrogen production, Int. J. Greenhouse Gas Control, 50, 121, 10.1016/j.ijggc.2016.04.033 Manzolini, 2013, CO2 capture in integrated gasification combined cycle with SEWGS – Part B: economic assessment, Fuel, 105, 220, 10.1016/j.fuel.2012.07.043 van Selow, 2013, Qualification of the ALKASORB sorbent for the sorption-enhanced water-gas shift process, Energy Proc., 37, 180, 10.1016/j.egypro.2013.05.100 Ebner, 2006, Understanding the adsorption and desorption behavior of CO2 on a K-promoted hydrotalcite-like compound (HTlc) through nonequilibrium dynamic isotherms, Ind. Eng. Chem. Res., 50, 6387, 10.1021/ie060389k Walspurger, 2010, High CO(2) storage capacity in alkali-promoted hydrotalcite-based material: in situ detection of reversible formation of magnesium carbonate, Chemistry, 16, 12694, 10.1002/chem.201000687 Lee, 2007, Chemisorption of carbon dioxide on potassium-carbonate-promoted hydrotalcite, J. Colloid Interface Sci., 308, 30, 10.1016/j.jcis.2006.11.011 Oliveira, 2008, CO2 sorption on hydrotalcite and alkali-modified (K and Cs) hydrotalcites at high temperatures, Sep. Purif. Technol., 62, 137, 10.1016/j.seppur.2008.01.011 Debecker, 2009, Exploring, tuning, and exploiting the basicity of hydrotalcites for applications in heterogeneous catalysis, Chemistry, 15, 3920, 10.1002/chem.200900060 Reichle, 1985, Catalytic reactions by thermally activated, synthetic, anionic clay minerals, J. Catal., 557, 547, 10.1016/0021-9517(85)90219-2 Cavani, 1991, Hydrotalcite-type anionic clays: preparation, properties and applications, Catal. Today, 11, 173, 10.1016/0920-5861(91)80068-K Meis, 2010, On the influence and role of alkali metals on supported and unsupported activated hydrotalcites for CO2 sorption, Ind. Eng. Chem. Res., 8086, 10.1021/ie902016f Walspurger, 2008, The crucial role of the K+-aluminium oxide interaction in K+-promoted alumina- and hydrotalcite-based materials for CO2 sorption at high temperatures, ChemSusChem, 1, 643, 10.1002/cssc.200800085 Van Selow, 2011, Improved sorbent for the sorption-enhanced water-gas shift process, Energy Proc., 4, 1090, 10.1016/j.egypro.2011.01.159 Reichle, 1986, The nature of the thermal decomposition of a catalytically active anionic clay mineral, J. Catal., 7, 352, 10.1016/0021-9517(86)90262-9 Tichit, 2006, Layered double hydroxides: precursors for multifunctional catalysts, Top. Catal., 39, 89, 10.1007/s11244-006-0041-6 Van Selow, 2009, Carbon capture by sorption-enhanced water-gas shift reaction process using hydrotalcite-based material, Ind. Eng. Chem. Res., 4184, 10.1021/ie801713a Cobden, 2007, Sorption-enhanced hydrogen production for pre-combustion CO2 capture: thermodynamic analysis and experimental results, Int. J. Greenhouse Gas Control, 1, 170, 10.1016/S1750-5836(07)00021-7 Boon, 2015, High-temperature pressure swing adsorption cycle design for sorption-enhanced water–gas shift, Chem. Eng. Sci., 122, 219, 10.1016/j.ces.2014.09.034 van Dijk, 2011, Testing of hydrotalcite based sorbents for CO2 and H2S capture for use in sorption enhanced water gas shift, Energy Proc., 4, 1110, 10.1016/j.egypro.2011.01.162 Halabi, 2012, High capacity potassium-promoted hydrotalcite for CO2 capture in H2 production, Int. J. Hydrogen Energy, 37, 4516, 10.1016/j.ijhydene.2011.12.003 Boon, 2014, Isotherm model for high-temperature, high-pressure adsorption of CO2 and H2O on K-promoted hydrotalcite, Chem. Eng. J., 248, 406, 10.1016/j.cej.2014.03.056 Reijers, 2006, Hydrotalcite as CO2 sorbent for sorption-enhanced steam reforming of methane, Ind. Eng. Chem. Res., 45, 2522, 10.1021/ie050563p Maroño, 2013, Influence of steam partial pressures in the CO2 capture capacity of K-doped hydrotalcite-based sorbents for their application to SEWGS processes, Int. J. Greenhouse Gas Control, 14, 183, 10.1016/j.ijggc.2013.01.024 Coenen, 2016, Chemisorption working capacity and kinetics of CO2 and H2O of hydrotalcite-based adsorbents for sorption-enhanced water-gas-shift applications, Chem. Eng. J., 293, 9, 10.1016/j.cej.2016.02.050 van Dijk, 2011, Testing of hydrotalcite-based sorbents for CO2 and H2S capture for use in sorption enhanced water gas shift, Int. J. Greenhouse Gas Control, 5, 505, 10.1016/j.ijggc.2010.04.011 Hufton, 1999, Sorption-enhanced reaction process for hydrogen production, AIChE J., 45, 248, 10.1002/aic.690450205 Fricker, 2013, Effect of H2O on Mg(OH)2 carbonation pathways for combined CO2 capture and storage, Chem. Eng. Sci., 100, 332, 10.1016/j.ces.2012.12.027 Walspurger, 2010, In situ XRD detection of reversible dawsonite formation on alkali promoted alumina: a cheap sorbent for CO2 capture, Eur. J. Inorg. Chem., 2010, 2461, 10.1002/ejic.201000263 Maroño, 2014, Lab-scale tests of different materials for the selection of suitable sorbents for CO2 capture with H2 production in IGCC processes, Fuel, 116, 861, 10.1016/j.fuel.2013.03.067