In situ surface engineering enables high interface stability and rapid reaction kinetics for Ni-rich cathodes

eScience - Tập 3 - Trang 100082 - 2023
Wenshuai Guo1, Wu Wei1, Huawei Zhu1, Yanjie Hu1, Hao Jiang1,2, Chunzhong Li1,2
1Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China
2Key Laboratory for Ultrafine Materials of Ministry of Education, School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China

Tài liệu tham khảo

Yang, 2021, Challenges and key requirements of batteries for electric vertical takeoff and landing aircraft, Joule, 5, 1644, 10.1016/j.joule.2021.05.001

Louli, 2020, Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis, Nat. Energy, 5, 693, 10.1038/s41560-020-0668-8

Lee, 2021, A cooperative biphasic MoOx-MoPx promoter enables a fast-charging lithium-ion battery, Nat. Commun., 12, 39, 10.1038/s41467-020-20297-8

Zeng, 2018, Stabilization of a high-capacity and high-power nickel-based cathode for Li-ion batteries, Chem, 4, 690, 10.1016/j.chempr.2017.12.027

Bi, 2020, Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode, Science, 370, 1313, 10.1126/science.abc3167

Xu, 2021, Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries, Nat. Mater., 20, 84, 10.1038/s41563-020-0767-8

Lee, 2022, Surface stabilization of Ni-rich layered cathode materials via surface engineering with LiTaO3 for lithium-ion batteries, ACS Appl. Mater. Interfaces, 14, 2731, 10.1021/acsami.1c19443

Ni, 2022, Crack-free single-crystalline Co-free Ni-rich LiNi0.95Mn0.05O2 layered cathode, eScience, 2, 116, 10.1016/j.esci.2022.02.006

Kim, 2021, Microstructure engineered Ni-rich layered cathode for electric vehicle batteries, Adv. Energy Mater., 11, 10.1002/aenm.202100884

Sari, 2019, Controllable cathode-electrolyte interface of Li[Ni0.8Co0.1Mn0.1]O2 for lithium ion batteries: a review, Adv. Energy Mater., 9

Kim, 2021, Rational design of coating ions via advantageous surface reconstruction in high-nickel layered oxide cathodes for lithium-ion batteries, Adv. Energy Mater., 11, 10.1002/aenm.202101112

Zhang, 2021, Designing safer lithium-based batteries with nonflammable electrolytes: a review, eScience, 1, 163, 10.1016/j.esci.2021.12.003

Rodrigues, 2017, A materials perspective on Li-ion batteries at extreme temperatures, Nat. Energy, 2, 10.1038/nenergy.2017.108

Guo, 2022, Solid-state lithium batteries: safety and prospects, eScience, 2, 138, 10.1016/j.esci.2022.02.008

Kim, 2018, A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries, Energy Environ. Sci., 11, 1449, 10.1039/C8EE00155C

Qian, 2020, Enhanced surface chemical and structural stability of Ni-rich cathode materials by synchronous lithium-ion conductor coating for lithium-ion batteries, ACS Appl. Mater. Interfaces, 12, 13813, 10.1021/acsami.9b21264

Yu, 2022, Lithium-conductive LiNbO3 coated high-voltage LiNi0.5Co0.2Mn0.3O2 cathode with enhanced rate and cyclability, Green Energy Environ., 7, 266, 10.1016/j.gee.2020.09.011

Han, 2020, Anchoring interfacial nickel cations on single-crystal LiNi0.8Co0.1Mn0.1O2 cathode surface via controllable electron transfer, ACS Energy Lett., 5, 2421, 10.1021/acsenergylett.0c01032

Yan, 2018, Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries, Nat. Energy, 3, 600, 10.1038/s41560-018-0191-3

Yoon, 2021, Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries, Nat. Energy, 6, 362, 10.1038/s41560-021-00782-0

Xu, 2019, Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes, Nat. Energy, 4, 484, 10.1038/s41560-019-0387-1

Yu, 2021, Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries, Nat. Commun., 12, 4564, 10.1038/s41467-021-24893-0

Schipper, 2018, From surface ZrO2 coating to bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries, Adv. Energy Mater., 8, 10.1002/aenm.201701682

Zhang, 2022, Building a stabilized structure from surface to bulk of Ni-rich cathode for enhanced electrochemical performance, Energy Stor. Mater., 47, 87

Li, 2019, Synergy of doping and coating induced heterogeneous structure and concentration gradient in Ni-rich cathode for enhanced electrochemical performance, J. Power Sources, 423, 144, 10.1016/j.jpowsour.2019.03.073

He, 2018, Sufficient utilization of zirconium ions to improve the structure and surface properties of nickel-rich cathode materials for lithium-ion batteries, ChemSusChem, 11, 1639, 10.1002/cssc.201702451

Zhu, 2020, High-efficiency Mo doping stabilized LiNi0.9Co0.1O2 cathode materials for rapid charging and long-life Li-ion batteries, Chem. Eng. Sci., 217, 10.1016/j.ces.2020.115518

Xie, 2019, A Mg-doped high-nickel layered oxide cathode enabling safer, high-energy-density Li-ion batteries, Chem. Mater., 31, 938, 10.1021/acs.chemmater.8b03900

Moon, 2021, The correlation between particle hardness and cycle performance of layered cathode materials for lithium-ion batteries, J. Power Sources, 486, 10.1016/j.jpowsour.2020.229359

Luo, 2021, Engineering a robust interface on Ni-rich cathodes via a novel dry doping process toward advanced high-voltage performance, ACS Appl. Mater. Interfaces, 13, 45068, 10.1021/acsami.1c12803

Kim, 2021, Li-ion diffusivity and electrochemical performance of Ni-rich cathode material doped with fluoride ions, J. Power Sources, 506, 10.1016/j.jpowsour.2021.230219

Sadjadi, 2008, Structural characterization of NiTiO3 nanopowders prepared by stearic acid gel method, Mater. Lett., 62, 3679, 10.1016/j.matlet.2008.04.028

Xu, 2017, In situ growth enabling ideal graphene encapsulation upon mesocrystalline MTiO3 (M = Ni, Co, Fe) nanorods for stable lithium storage, ACS Energy Lett., 2, 659, 10.1021/acsenergylett.7b00018

Jamil, 2021, Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+-conductor coating, Chem. Eng. J., 407, 10.1016/j.cej.2020.126442

Bak, 2014, Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy, ACS Appl. Mater. Interfaces, 6, 22594, 10.1021/am506712c

Kim, 2020, Heuristic solution for achieving long-term cycle stability for Ni-rich layered cathodes at full depth of discharge, Nat. Energy, 5, 860, 10.1038/s41560-020-00693-6

Liu, 2020, Inhibition of transition metals dissolution in cobalt-free cathode with ultrathin robust interphase in concentrated electrolyte, Nat. Commun., 11, 3629, 10.1038/s41467-020-17396-x

Zhao, 2018, High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases, Adv. Energy Mater., 8, 10.1002/aenm.201800297

Thông tin
Thông tin xuất bản

eScience

Tập 3

100082

Thông tin tác giả