The correlation between particle hardness and cycle performance of layered cathode materials for lithium-ion batteries

Márquez, 2017, Na-ion batteries for large scale Applications : a review on anode materials and solid electrolyte interphase formation, Adv. Energy Mater., 7, 1700463, 10.1002/aenm.201700463 Cho, 2015, Commercial and research battery technologies for electrical energy storage applications, Prog. Energy Combust. Sci., 48, 84, 10.1016/j.pecs.2015.01.002 Hou, 2017, Core-shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries, J. Mater. Chem., 5, 4254, 10.1039/C6TA10297B Wang, 2012, Electrospun V2O5 nanostructures with controllable morphology as high performance cathode materials for lithium-ion batteries, J. Chem. Eur., 18, 8987, 10.1002/chem.201200434 Schipper, 2016, Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy : zirconium-doped LiNi0.6Co0.2Mn0.2O2, J. Mater. Chem., 4, 16073, 10.1039/C6TA06740A Hwang, 2016, Comprehensive study of the role of transition metals in O3-type layered Na[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, and 0.8) cathodes for sodium ion batteries, J. Mater. Chem., 4, 17952, 10.1039/C6TA07392A Li, 2020, Long-term cyclability of NCM-811 at high voltages in lithium-ion batteries : an in-depth diagnostic study, Chem. Mater., 32, 7796, 10.1021/acs.chemmater.0c02398 Schipper, 2017, Review—recent advances and remaining challenges for lithium ion battery cathodes, J. Electrochem. Soc., 164, A6220, 10.1149/2.0351701jes Yang, 2006, A study on capacity fading of lithium-ion battery with manganese spinel positive electrode during cycling, Electrochim. Acta, 51, 3228, 10.1016/j.electacta.2005.09.014 Wang, 1999, TEM study of electrochemical cycling-induced damage and disorder in LiCoO2 cathodes for rechargeable lithium batteries, J. Electrochem. Soc., 146, 473, 10.1149/1.1391631 Yan, 2017, Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries, Nat. Commun., 8, 10.1038/ncomms14101 Gan, 2019, Surface modification of LiNi0.8Co0.1Mn0.1O2 by WO3 as a cathode material for LIB, Appl. Surf. Sci., 481, 1228, 10.1016/j.apsusc.2019.03.116 Mo, 2020, Improved cycling stability of LiNi0.6Co0.2Mn0.2O2 through microstructure consolidation by TiO2 coating for Li-ion batteries, J. Power Sources, 448, 227439, 10.1016/j.jpowsour.2019.227439 Fan, 2020, Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries, Nano Energy, 70, 104450, 10.1016/j.nanoen.2020.104450 Cheng, 2010, Diffusion-induced stress, interfacial charge transfer, and criteria for avoiding crack initiation of electrode particles, J. Electrochem. Soc., 157, A508, 10.1149/1.3298892 Zhao, 2010, Fracture of electrodes in lithium-ion batteries caused by fast charging, J. Appl. Phys., 108, 10.1063/1.3492617 Zheng, 2011, Microstructural changes in LiNi0.8Co0.15Al0.05O2 positive electrode material during the first cycle, J. Electrochem. Soc., 158, A357, 10.1149/1.3544843 Chen, 2018, High-voltage performance of concentration-gradient Li[Ni0.6Co0.2Mn0.2]O2 layered oxide cathode materials for lithium batteries, New J. Chem., 42, 5868, 10.1039/C7NJ04936F Chang, 2015, Multiscale analysis of prelithiated silicon nanowire for Li-ion battery, Comput. Mater. Sci., 98, 99, 10.1016/j.commatsci.2014.11.001 Zhang, 2007, Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles, J. Electrochem. Soc., 154, A910, 10.1149/1.2759840 Han, 2013, Numerical study of grain boundary effect on Li+ effective diffusivity and intercalation-induced stresses in Li-ion battery active materials, J. Power Sources, 240, 155, 10.1016/j.jpowsour.2013.03.135 Bai, 2020, A chemo-mechanical grain boundary model and its application to understand the damage of Li-ion battery materials, Scripta Mater., 183, 45, 10.1016/j.scriptamat.2020.03.027 Gwak, 2018, Cohesive zone model for crack propagation in crystalline silicon nanowires, J. Mech. Sci. Technol., 32, 3755, 10.1007/s12206-018-0728-1 Lu, 2020, Synthesis and characterization of Cu-doped LiNi0.6Co0.2Mn0.2O2 materials for Li-ion batteries, J. Alloys Compd., 844, 156180, 10.1016/j.jallcom.2020.156180 Mladenov, 2001, Effect of Mg doping and MgO-surface modification on the cycling stability of LiCoO2 electrodes, Electrochem. Commun., 3, 410, 10.1016/S1388-2481(01)00192-8 Wysocka, 2017, Evaluation of citric acid corrosion inhibition efficiency and passivation kinetics for aluminium alloys in alkaline media by means of dynamic impedance monitoring, Electrochim. Acta, 258, 1463, 10.1016/j.electacta.2017.12.017 Hiramatsu, 1966, Determination of the tensile strength of rock by a compression test of an irregular test piece, Int. J. Rock Mech. Min. Sci., 3, 89, 10.1016/0148-9062(66)90002-7 Liu, 2012, Finite element analysis of plastic collapse and crack behavior of steel pressure vessels and piping using XFEM, J. Fail. Anal. Prev., 12, 707, 10.1007/s11668-012-9623-8 Li, 2018, A review of the extended finite element method on macrocrack and microcrack growth simulations, Theor. Appl. Fract. Mech., 97, 236, 10.1016/j.tafmec.2018.08.008 Zhang, 2019, Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V, Nat. Energy, 4, 594, 10.1038/s41560-019-0409-z Bai, 2020, A chemo-mechanical grain boundary model and its application to understand the damage of Li-ion battery materials, Scripta Mater., 183, 45, 10.1016/j.scriptamat.2020.03.027