High-efficiency Mo doping stabilized LiNi0.9Co0.1O2 cathode materials for rapid charging and long-life Li-ion batteries

Myung, 2017, Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives, ACS Energy Lett., 2, 196, 10.1021/acsenergylett.6b00594 Hou, 2017, Surface/interfacial structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives, Small, 13, 1701802, 10.1002/smll.201701802 Zou, 2019, Lattice doping regulated interfacial reactions in cathode for enhanced cycling stability, Nat. Commun., 10, 3447, 10.1038/s41467-019-11299-2 Chen, 2010, Role of surface coating on cathode materials for lithium-ion batteries, J. Mater. Chem., 20, 7606, 10.1039/c0jm00154f Manthiram, 2016, Nickel-rich and lithium rich layered oxide cathodes: progress and perspectives, Adv. Energy Mater., 6, 1501010, 10.1002/aenm.201501010 Zhang, 2019, LiNi0.90Co0.07Mg0.03O2 cathode materials with Mg-concentration gradient for rechargeable lithium-ion batteries, J. Mater. Chem. A Kim, 2016, Enhancing interfacial bonding between anisotropically oriented grains using a glue-nanofiller for advanced Li-ion battery cathode, Adv. Mater., 28, 4705, 10.1002/adma.201506256 Yu, 2019, 110th anniversary: concurrently coating and doping high-valence vanadium in nickel-rich lithiated oxides for high-rate and stable lithium-ion batteries, Ind. Eng. Chem. Res., 58, 4108, 10.1021/acs.iecr.8b06162 Yamada, 1995, Synthesis and properties of LiNiO2 as cathode material for secondary batteries, J. Power Sources, 54, 209, 10.1016/0378-7753(94)02068-E Wu, 2019, Improving the reversibility of the H2–H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability, Nano Energy, 59, 50, 10.1016/j.nanoen.2019.02.027 Park, 2018, Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for li-ion batteries, Adv. Energy Mater., 8, 1801202, 10.1002/aenm.201801202 Noh, 2013, Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries, J. Power Sources, 233, 121, 10.1016/j.jpowsour.2013.01.063 Yang, 2016, Suppressing the phase transition of the layered Ni-rich oxide cathode during high-voltage cycling by introducing low-content Li2MnO3, ACS Appl. Mater. Interfaces, 8, 1297, 10.1021/acsami.5b09938 Liu, 2019, Revealing the effect of Ti doping on significantly enhancing cyclic performance at a high cutoff voltage for Ni-rich LiNi0.8Co0.15Al0.05O2 cathode, ACS Sustainable Chem. Eng., 7, 10661, 10.1021/acssuschemeng.9b01312 Hou, 2019, High-rate and long-life lithium-ion batteries coupling surface-Al3+-enriched LiNi0.7Co0.15Mn0.15O2 cathode with porous Li4Ti5O12 anode, Chem. Eng. J., 378, 122057, 10.1016/j.cej.2019.122057 Weigel, 2019, Structural and electrochemical aspects of LiNi0.8Co0.1Mn0.1O2 cathode materials doped by various cations, ACS Energy Lett., 4, 508, 10.1021/acsenergylett.8b02302 Schipper, 2018, From surface ZrO2 coating to bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries, Adv. Energy Mater., 8, 1701682, 10.1002/aenm.201701682 Wu, 2019, Use of Ce to reinforce the interface of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium-ion batteries under high operating voltage, ChemSusChem, 12, 935, 10.1002/cssc.201802304 Susai, 2019, Improving performance of LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium-ion batteries by doping with molybdenum ions: theoretical and experimental studies, ACS Appl. Energy Mater., 2, 4521, 10.1021/acsaem.9b00767 Kang, 2002, Layered Li(Ni0.5-xMn0.5-xM′2x)O2, (M′=Co, Al, Ti, x = 0, 0.025) cathode materials for Li-ion rechargeable batteries, J. Power Sources, 112, 41, 10.1016/S0378-7753(02)00360-9 Xie, 2015, Synthesis of LiNi0.8Co0.15Al0.05O2 with 5-sulfosalicylic acid as a chelating agent and its electrochemical properties, J. Mater. Chem. A, 3, 20236, 10.1039/C5TA05266A Xu, 2019, Highly stabilized Ni-rich cathode material with Mo induced epitaxially grown nanostructured hybrid surface for high performance lithium-ion batteries, ACS Appl. Mater. Interfaces, 11, 16629, 10.1021/acsami.9b03403 Zhang, 2017, Studies on stability and capacity for long-life cycle performance of Li (Ni0.5Co0.2Mn0.3)O2 by Mo modification for lithium-ion battery, J. Power Sources, 358, 1, 10.1016/j.jpowsour.2017.05.013 Liu, 2018, Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O2, Nano Energy, 44, 111, 10.1016/j.nanoen.2017.11.010 You, 2018, Modified high-nickel cathodes with stable surface chemistry against ambient air for lithium-ion batteries, Angew. Chem. Int. Edit., 57, 6480, 10.1002/anie.201801533 Li, 2018, Facilitating the operation of lithium-ion cells with high-nickel layered oxide cathodes with a small dose of aluminum, Chem. Mater., 30, 3101, 10.1021/acs.chemmater.8b01077 Ryu, 2018, Capacity fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?, Chem. Mater., 30, 1155, 10.1021/acs.chemmater.7b05269 Park, 2018, High-capacity concentration gradient Li[Ni0.865Co0.120Al0.015]O2 cathode for lithium-ion batteries, Adv. Energy Mater., 8, 1703612, 10.1002/aenm.201703612 Deng, 2017, 3D ordered macroporous MoS2@C nanostructure for flexible Li-ion batteries, Adv. Mater., 29, 1603020, 10.1002/adma.201603020 Xie, 2019, A Mg-doped high-nickel layered oxide cathode enabling safer, high-energy-density Li-ion batteries, Chem. Mater., 31, 938, 10.1021/acs.chemmater.8b03900 Du, 2016, Enhancing the thermal and upper voltage performance of Ni-rich cathode material by a homogeneous and facile coating method: spray-drying coating with nano-Al2O3, ACS Appl. Mater. Interfaces, 8, 17713, 10.1021/acsami.6b05629 Xu, 2016, Development of novel lithium borate additives for designed surface modification of high voltage (LiNi0.5Mn1.5O4) cathode, Energy Environ. Sci., 9, 1308, 10.1039/C5EE03360H Li, 2017, A novel electrolyte salt additive for lithium-ion batteries with voltages greater than 4.7 V, Adv. Energy Mater., 7, 1601397, 10.1002/aenm.201601397 Zhan, 2013, Mn(II) deposition on anodes and its effects on capacity fade in spinel lithium manganate-carbon systems, Nat. Commun., 4, 2437, 10.1038/ncomms3437