Li-ion diffusivity and electrochemical performance of Ni-rich cathode material doped with fluoride ions

Ding, 2019, Automotive Li-ion batteries: current status and future perspectives, Electrochem. Energy Rev., 2, 1, 10.1007/s41918-018-0022-z Liu, 2016, Understanding electrochemical potentials of cathode materials in rechargeable batteries, Mater. Today, 19, 109, 10.1016/j.mattod.2015.10.009 Nitta, 2015, Li-ion battery materials: present and future, Mater. Today, 18, 252, 10.1016/j.mattod.2014.10.040 Myung, 2017, Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives, ACS Energy Lett, 2, 196, 10.1021/acsenergylett.6b00594 Kang, 2006, Electrodes with high power and high capacity for rechargeable lithium batteries, Science, 977, 10.1126/science.1122152 Mizushima, 1980, LixCoO2 (0<x<-1): a new cathode material for batteries of high energy density, Mater. Res. Bull., 15, 783, 10.1016/0025-5408(80)90012-4 Reimers, 1992, Electrochemical and in situ X‐ray diffraction studies of lithium intercalation in Li x CoO2, J. Electrochem. Soc., 139, 2091, 10.1149/1.2221184 Ohzuku, 1993, Electrochemistry and structural chemistry of LiNiO2 (R3̅m) for 4 volt secondary lithium cells, J. Electrochem. Soc., 140, 1862, 10.1149/1.2220730 Majee, 2019, Comparison of local crystal structure and magnetic properties of cation substituted LiNiO2 compositions, Mater. Res. Bull., 116, 143, 10.1016/j.materresbull.2019.04.017 Kanno, 1994, Phase relationship and lithium deintercalation in lithium nickel oxides, J. Solid State Chem., 110, 216, 10.1006/jssc.1994.1162 Bianchini, 2019, There and back again—the journey of LiNiO2 as a cathode active material, Angew. Chemie - Int. Ed., 58, 10434, 10.1002/anie.201812472 Min, 2017, A first-principles study of the preventive effects of Al and Mg doping on the degradation in LiNi0.8Co0.1Mn0.1O2 cathode materials, Phys. Chem. Chem. Phys., 19, 1762, 10.1039/C6CP06270A Liu, 2015, Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries, Angew. Chem. Int. Ed., 54, 4440, 10.1002/anie.201409262 Liu, 2020, Layered ternary metal oxides: performance degradation mechanisms as cathodes, and design strategies for high-performance batteries, Prog. Mater. Sci., 111, 100655, 10.1016/j.pmatsci.2020.100655 Schipper, 2017, Review—recent advances and remaining challenges for lithium ion battery cathodes, J. Electrochem. Soc., 164, 10.1149/2.0351701jes Wang, 2011, Cobalt suppressed Jahn-Teller effect in LiCo0.5Ni 0.5O2 for lithium ion batteries, Solid State Commun., 151, 234, 10.1016/j.ssc.2010.11.024 Wang, 2020, Ni-Rich/Co-Poor layered cathode for automotive Li-ion batteries: promises and challenges, Adv. Energy Mater., 10, 1 Hong, 2020, Revealing the correlation between structural evolution and Li+diffusion kinetics of nickel-rich cathode materials in Li-ion batteries, J. Mater. Chem. A., 8, 8540, 10.1039/D0TA00555J Ryu, 2018, Capacity fading of ni-rich li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?, Chem. Mater., 30, 1155, 10.1021/acs.chemmater.7b05269 Zhang, 2020, Problems and their origins of Ni-rich layered oxide cathode materials, Energy Storage Mater, 24, 247, 10.1016/j.ensm.2019.08.013 Ahn, 2019, High lithium ion transport through rGO-wrapped LiNi0.6Co0.2Mn0.2O2 cathode material for high-rate capable lithium ion batteries, Front. Chem., 7, 1, 10.3389/fchem.2019.00361 Sun, 2020, 5, 1136 Liu, 2018, Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O2, Nano Energy, 44, 111, 10.1016/j.nanoen.2017.11.010 Kwon, 2020, Understanding the role of temperature and cathode composition on interface and bulk: optimizing aluminum oxide coatings for Li-ion cathodes, J. Electrochem. Soc., 167 Chen, 2014, An approach to application for LiNi0.6Co0.2Mn 0.2O2 cathode material at high cutoff voltage by TiO 2 coating, J. Power Sources, 256, 20, 10.1016/j.jpowsour.2014.01.061 Hu, 2008, Comparison of AlPO4- and Co3(PO4)2-coated LiNi0.8Co0.2O2 cathode materials for Li-ion battery, Electrochim. Acta, 53, 2567, 10.1016/j.electacta.2007.10.040 Yang, 2012, Significant improvement of electrochemical properties of AlF 3-coated LiNi 0.5Co 0.2Mn 0.3O 2 cathode materials, Electrochim. Acta, 63, 363, 10.1016/j.electacta.2011.12.121 Moskon, 2007, Morphology and electrical properties of conductive carbon coatings for cathode materials, J. Power Sources, 174, 683, 10.1016/j.jpowsour.2007.06.239 Chen, 2010, Role of surface coating on cathode materials for lithium-ion batteries, J. Mater. Chem., 20, 7606, 10.1039/c0jm00154f Wu, 2002, Effects of heteroatoms on electrochemical performance of electrode materials for lithium ion batteries, Electrochim. Acta, 47, 3491, 10.1016/S0013-4686(02)00317-1 Weigel, 2019, Structural and electrochemical aspects of LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode materials doped by various cations, ACS Energy Lett, 4, 508, 10.1021/acsenergylett.8b02302 Li, 2019, Synergy of doping and coating induced heterogeneous structure and concentration gradient in Ni-rich cathode for enhanced electrochemical performance, J. Power Sources, 423, 144, 10.1016/j.jpowsour.2019.03.073 Zhu, 2020, Sn-doping and Li 2 SnO 3 nano-coating layer cycle stability at 4 . 6 V cut-o ff voltage, Nanomaterials, 10, 868, 10.3390/nano10050868 Kim, 2014, Effects of Cl doping on the structural and electrochemical properties of high voltage LiMn1.5Ni0.5O4 cathode materials for Li-ion batteries, J. Alloys Compd., 592, 48, 10.1016/j.jallcom.2013.12.248 Sun, 2006, Effect of sulfur and nickel doping on morphology and electrochemical performance of LiNi0.5Mn1.5O4-xSx spinel material in 3-V region, J. Power Sources, 161, 19, 10.1016/j.jpowsour.2006.03.085 Kong, 2016, Conflicting roles of anion doping on the electrochemical performance of Li-ion battery cathode materials, Chem. Mater., 28, 6942, 10.1021/acs.chemmater.6b02627 Li, 2015, Halogen-doping in LiCoO2 cathode materials for Li-ion batteries: insights from ab initio calculations, RSC Adv., 5, 107326, 10.1039/C5RA21258H Chen, 2019, High performance and structural stability of K and Cl Co-doped LiNi0.5Co0.2Mn0.3O2 cathode materials in 4.6 voltage, Front. Chem., 7, 1 Zhu, 2018, Enhanced high voltage performance of chlorine/bromine co-doped Lithium Nickel manganese cobalt oxide, Crystals, 8, 1, 10.3390/cryst8110425 Liao, 2006, Synthesis and electrochemical properties of layered Li[Ni0.333Co0.333Mn0.293 Al0.04]O2-zFz cathode materials prepared by the sol-gel method, J. Power Sources, 160, 657, 10.1016/j.jpowsour.2005.12.095 Liu, 2018, Synergistic effect of F- doping and LiF coating on improving the high-voltage cycling stability and rate capacity of LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium-ion batteries, ACS Appl. Mater. Interfaces, 10, 34153, 10.1021/acsami.8b10016 Zhou, 2018, Enhanced rate performance and high potential as well as decreased strain of LiNi0.6Co0.2Mn0.2O2 by facile fluorine modification, Electrochim. Acta, 261, 565, 10.1016/j.electacta.2017.12.159 Chen, 2013, Enhanced electrochemical performance of polyacene coated LiMn 2 O 3.95 F 0.05 for lithium ion batteries, Appl. Surf. Sci., 286, 177, 10.1016/j.apsusc.2013.09.044 He, 2007, Synthesis of LiNi1/3Co1/3Mn1/3O2-zFz cathode material from oxalate precursors for lithium ion battery, J. Fluor. Chem., 128, 139, 10.1016/j.jfluchem.2006.11.002 Kim, 2004, Synthesis and electrochemical properties of Li[Ni1/3Co 1/3Mn(1/3-x)Mgx]O2-yFy, via coprecipitation, Electrochem. Solid State Lett., 7, 477, 10.1149/1.1809554 Zhao, 2019, Facile synthesis of fluorine doped single crystal Ni-rich cathode material for lithium-ion batteries, Solid State Ionics, 342, 115065, 10.1016/j.ssi.2019.115065 Schipper, 2018, From surface ZrO2 coating to bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries, Adv. Energy Mater., 8, 1701682, 10.1002/aenm.201701682 Liu, 2016, Synthesis of Li2Si2O5-coated LiNi0.6Co0.2Mn0.2O2 cathode materials with enhanced high-voltage electrochemical properties for lithium-ion batteries, J. Alloys Compd., 674, 447, 10.1016/j.jallcom.2016.03.060 Wang, 2015, New insights into improving rate performance of lithium-rich cathode material, Adv. Mater., 27, 3915, 10.1002/adma.201500956 Di Xu, 2018, Improving cycling performance and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials by Li4Ti5O12 coating, Electrochim. Acta, 268, 358, 10.1016/j.electacta.2018.02.049 Li, 2019, F127-assisted synthesis of LiNi 0.5 Co 0.2 Mn 0.3 O 1.99 F 0.01 as a high rate and long lifespan cathode material for lithium-ion batteries, Appl. Surf. Sci., 476, 1061, 10.1016/j.apsusc.2019.01.160 Yue, 2013, A low temperature fluorine substitution on the electrochemical performance of layered LiNi0.8Co0.1Mn0.1O 2-zFz cathode materials, Electrochim. Acta, 92, 1, 10.1016/j.electacta.2013.01.018 Du, 2008, Fluorine-doped LiNi0.5Mn1.5O4 for 5 V cathode materials of lithium-ion battery, Mater. Res. Bull., 43, 3607, 10.1016/j.materresbull.2008.02.025 Radin, 2017, Narrowing the gap between theoretical and practical capacities in Li-ion layered oxide cathode materials, Adv. Energy Mater., 7, 1, 10.1002/aenm.201602888 Van Der Ven, 2000, Lithium diffusion in layered Li x CoO 2, Electrochem. Solid State Lett., 3, 301, 10.1149/1.1391130 Wei, 2015, Kinetics tuning of Li-ion diffusion in layered Li(NixMnyCoz)O2, J. Am. Chem. Soc., 137, 8364, 10.1021/jacs.5b04040 Gao, 2020, Evolution of Ni/Li antisites under the phase transition of a layered LiNi1/3Co1/3Mn1/3O2 cathode, J. Mater. Chem. A, 8, 6337, 10.1039/D0TA01642J Bi, 2015, Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 utilized in lithium ion battery, J. Power Sources, 283, 211, 10.1016/j.jpowsour.2015.02.095 Chen, 2014, Effects of cationic substitution on structural defects in layered cathode materials LiNiO2, J. Mater. Chem. A., 2, 7988, 10.1039/c4ta00637b Wu, 2015, Effect of Ni2+ content on lithium/nickel disorder for Ni-rich cathode materials, ACS Appl. Mater. Interfaces, 7, 7702, 10.1021/acsami.5b00645 Li, 1993, In situ x-ray diffraction and electrochemical studies of Li1-xNiO2, Solid State Ionics, 67, 123, 10.1016/0167-2738(93)90317-V Kissinger, 1996, Laboratory techniques in electroanalytical chemistry, Marcel Dekker, 15, 550 Weppner, 1977, Determination of the kinetic parameters of mixed‐conducting electrodes and application to the system Li3Sb, J. Electrochem. Soc., 124, 1569, 10.1149/1.2133112 Nowak, 2014, Determination of chemical diffusion coefficient of lithium ions in ceramics derived from pyrolysed poly(1,2-dimethylsilazane) and starch, Procedia Eng., 98, 8, 10.1016/j.proeng.2014.12.480 Gao, 2017, Synthesis of F-doped LiFePO4/C cathode materials for high performance lithium-ion batteries using co-precipitation method with hydrofluoric acid source, J. Alloys Compd., 727, 501, 10.1016/j.jallcom.2017.08.149 Choi, 2020, Modeling and applications of electrochemical impedance spectroscopy (Eis) for lithium-ion batteries, J. Electrochem. Sci. Technol., 11, 1, 10.33961/jecst.2019.00528 He, 2017, Spinel-layered integrate structured nanorods with both high capacity and superior high-rate capability as cathode material for lithium-ion batteries, Nano Res., 10, 556, 10.1007/s12274-016-1314-4 Wang, 2015, Low temperature electrochemical performance of β-LixV2O5 cathode for lithium-ion batteries, Electrochim. Acta, 169, 440, 10.1016/j.electacta.2015.04.084 Tang, 2011, Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS, Electrochim. Acta, 56, 4869, 10.1016/j.electacta.2011.02.119 Zhu, 2010, Galvanostatic intermittent titration technique for phase-transformation electrodes, J. Phys. Chem. C, 114, 2830, 10.1021/jp9113333