Calculation of stresses on 3D scaffolds fabricated using extrusion-based bioprinting using a semi-analytical approach

Journal of the Mechanical Behavior of Biomedical Materials - Tập 135 - Trang 105471 - 2022
Yuan-Zhu Xin1, Xiaoying Li1, Seok-Jo Yang2, JunHee Lee3, Chunbao Liu1, Yuqiang Fang1
1School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130025, China
2Department of Mechatronics Engineering, College of Engineering, Chungnam National University, South Korea
3Department of Nature-inspired System and Application, Korea Institute of Machinery & Materials, 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon, 34103, South Korea

Tài liệu tham khảo

Adharsh, 2020, Review on 3d printing of biological tissues and the materialization, IOP Conf. Ser. Mater. Sci. Eng., 988, 10.1088/1757-899X/988/1/012128

Arahira, 2016, Variation of mechanical behavior of β-TCP/collagen two phase composite scaffold with mesenchymal stem cell in vitro, J. Mech. Behav. Biomed. Mater., 61, 464, 10.1016/j.jmbbm.2016.04.019

Barber, 2010, vol. 172

Bose, 2013, Bone tissue engineering using 3D printing, Mater. Today, 16, 496, 10.1016/j.mattod.2013.11.017

Brunski, 1987, Biomaterials and biomechanics in dental implant design, Int. J. Oral Maxillofac. Implants, 3, 85

Cho, 2014, Fabrication of dual-pore scaffolds using SLUP (salt leaching using powder) and WNM (wire-network molding) techniques, Materials Science & Engineering C Mater. Biol. Appl., 45, 546, 10.1016/j.msec.2014.10.009

Chung, 2020, Toward biomimetic scaffolds for tissue engineering: 3D printing techniques in regenerative medicine, Front. Bioeng. Biotechnol., 8, 10.3389/fbioe.2020.586406

Cui, 2012, Thermal inkjet printing in tissue engineering and regenerative medicine, Recent Pat. Drug Deliv. Formulation, 6, 149, 10.2174/187221112800672949

Eshraghi, 2010, Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering, Acta Biomater., 6, 2467, 10.1016/j.actbio.2010.02.002

Fan, 2012, Fabrication and properties of porous scaffold of magnesium phosphate/polycaprolactone biocomposite for bone tissue engineering, Appl. Surf. Sci., 258, 7589, 10.1016/j.apsusc.2012.04.094

Farina, 2021, Micro computed tomography based finite element models for elastic and strength properties of 3D printed glass scaffolds, Acta Mech. Sin., 37, 292, 10.1007/s10409-021-01065-3

Huang, 2015, Semi-analytical and numerical studies on the flattened Brazilian splitting test used for measuring the indirect tensile strength of rocks, Rock Mech. Rock Eng., 48, 1849, 10.1007/s00603-014-0676-8

Hussain, 2021, Scaffold-free and scaffold-based cellular strategies and opportunities for cornea tissue engineering, Prog. Biomed. Eng., 3, 10.1088/2516-1091/ac12d7

Hutmacher, 2001, Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling, J. Biomed. Mater. Res., 2001, 55, 203, 10.1002/1097-4636(200105)55:2<203::AID-JBM1007>3.0.CO;2-7

Jr, 2008, Prediction of extracellular matrix stiffness in engineered heart valve tissues based on nonwoven scaffolds, Biomech. Model. Mechanobiol., 7, 309, 10.1007/s10237-007-0102-1

Kuhlmann, 2021, Evaluation of the usability of a low-cost 3D printer in a tissue engineering approach for external ear reconstruction, Int. J. Mol. Sci., 22, 10.3390/ijms222111667

Larner, 2013, The mechanical properties of porous aluminum using finite element method simulations and compression experiments, Mrs Online Proc. Libr. Arch., 1580

Lee, 2017, Mechanical properties and cell-culture characteristics of polycaprolactone kagome-structure scaffold fabricated by precision extruding deposition system, Biomedical Materials, 96, 10.1088/1748-605X/aa8357

Li, 2013, The Brazilian disc test for rock mechanics applications. Review and new insights, Rock Mech. Rock Eng., 46, 269, 10.1007/s00603-012-0257-7

Malda, 2013, 25th anniversary article: engineering hydrogels for biofabrication, Adv. Mater., 25, 5011, 10.1002/adma.201302042

Martínez-Vázquez, 2010, Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration, Acta Biomater., 6, 4361, 10.1016/j.actbio.2010.05.024

Miszuk, 2021, Elastic mineralized 3D electrospun PCL nanofibrous scaffold for drug release and bone tissue engineering, ACS Appl. Bio Mater., 4, 3639, 10.1021/acsabm.1c00134

Murphy, 2014, 3D bioprinting of tissues and organs, Nat. Biotechnol., 32, 773, 10.1038/nbt.2958

Nd, 2020, Cartilage tissue engineering using injectable functionalized Demineralized Bone Matrix scaffold with glucosamine in PVA carrier, cultured in microbioreactor prior to study in rabbit model - ScienceDirect, Mater. Sci. Eng. C, 120

Ozbolat, 2017, Evaluation of bioprinter technologies, Addit. Manuf., 13, 179

Park, 2011, Fabrication of porous polycaprolactone/hydroxyapatite (PCL/HA) blend scaffolds using a 3D plotting system for bone tissue engineering, Bioproc. Biosyst. Eng., 34, 505, 10.1007/s00449-010-0499-2

Park, S. A., Lee, J. B., Kim, Y. E., et al., Fabrication of biomimetic PCL scaffold using rapid prototyping for bone tissue engineering. Macromol. Res., 22(8): 882-887. doi: 10.1007/s13233-014-2119-5.

Patra, 2013, A novel route to polycaprolactone scaffold for vascular tissue engineering, J. Biomater. Tissue Eng., 3, 288, 10.1166/jbt.2013.1087

Procopio, 2003, Analysis of the diametrical compression test and the applicability to plastically deforming materials, J. Mater. Sci., 38, 3629, 10.1023/A:1025681432260

Ramay, 2004, Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering, Biomaterials, 25, 5171, 10.1016/j.biomaterials.2003.12.023

Ravari, 2021, Fabrication and characterization of an injectable reinforced composite scaffold for cartilage tissue engineering: an in vitro study, Biomedical Materials, 16, 10.1088/1748-605X/abed97

Rezaei, 2021, 3D printed chitosan/polycaprolactone scaffold for lung tissue engineering: hope to be useful for COVID-19 studies, RSC Adv., 11, 19508, 10.1039/D1RA03410C

Richards, 2013, 3D printing for tissue engineering, Isr. J. Chem., 53, 805, 10.1002/ijch.201300086

Sm, 2020, Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application, Ceram. Int. 2020, 46, 3443

Tamjid, 2015, Fabrication of a highly ordered hierarchically designed porous nanocomposite via indirect 3D printing: mechanical properties and in vitro cell responses, Mater. Des., 88, 924, 10.1016/j.matdes.2015.08.133

Wang, 2004, The flattened Brazilian disc specimen used for testing elastic modulus, tensile strength and fracture toughness of brittle rocks: analytical and numerical results, Int. J. Rock Mech. Min. Sci., 41, 245, 10.1016/S1365-1609(03)00093-5

Woodfield, 2004, Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique, Biomaterials, 25, 4149, 10.1016/j.biomaterials.2003.10.056

Xia, 2021, Development of a decellularized meniscus matrix-based nanofibrous scaffold for meniscus tissue engineering, Acta Biomater., 128, 175, 10.1016/j.actbio.2021.03.074

Yadav, 2021, Mechanical and biological behaviour of porous Ti–SiO2 scaffold for tissue engineering application, Ceram. Int., 47, 22191, 10.1016/j.ceramint.2021.04.242

Ye, 2009, Estimation of the tensile elastic modulus using Brazilian disc by applying diametrically opposed concentrated loads, Int. J. Rock Mech. Min. Sci., 46, 568, 10.1016/j.ijrmms.2008.08.004

Yeh, 2009, Characterizing microporous PCL matrices for application of tissue engineering, J. Med. Biol. Eng., 29, 92

Yu, 2020, Current advances in 3D bioprinting technology and its applications for tissue engineering, Polymers, 12, 2958, 10.3390/polym12122958

Zhao, 2021, Design and mechanical properties verification of gradient voronoi scaffold for bone tissue engineering, Micromachines, 10.3390/mi12060664

Thông tin
Thông tin xuất bản

Journal of the Mechanical Behavior of Biomedical Materials

Tập 135

105471

Thông tin tác giả