Evaluation of bioprinter technologies

Li, 2015, Current status of additive manufacturing for tissue engineering scaffold, Rapid Prototyp. J., 21, 747, 10.1108/RPJ-03-2014-0029 Ozbolat, 2013, Bioprinting toward organ fabrication: challenges and future trends, IEEE Trans. Biomed. Eng., 60, 691, 10.1109/TBME.2013.2243912 Kim, 2010, Stereolithographic bone scaffold design parameters: osteogenic differentiation and signal expression, Tissue Eng. Part B: Rev., 16, 523, 10.1089/ten.teb.2010.0171 Williams, 2005, Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering, Biomaterials, 26, 4817, 10.1016/j.biomaterials.2004.11.057 Hamid, 2011, Fabrication of three-dimensional scaffolds using precision extrusion deposition with an assisted cooling device, Biofabrication, 3, 34109, 10.1088/1758-5082/3/3/034109 Tarafder, 2013, Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering, J. Tissue Eng. Regen. Med., 7, 631, 10.1002/term.555 Skoog, 2014, Stereolithography in tissue engineering, J. Mater. Sci. Mater. Med., 25, 845, 10.1007/s10856-013-5107-y Kohane, 2008, Polymeric biomaterials in tissue engineering, Pediatr. Res., 63, 487, 10.1203/01.pdr.0000305937.26105.e7 O’Brien, 2011, Biomaterials & scaffolds for tissue engineering, Mater. Today, 14, 88, 10.1016/S1369-7021(11)70058-X Tsigkou, 2007, Enhanced differentiation and mineralization of human fetal osteoblasts on PDLLA containing Bioglass® composite films in the absence of osteogenic supplements, J. Biomed. Mater. Res. Part A, 80A, 837, 10.1002/jbm.a.30910 Mouriño, 2012, Metallic ions as therapeutic agents in tissue engineering scaffolds: an overview of their biological applications and strategies for new developments, J. R. Soc. Interface, 9, 401, 10.1098/rsif.2011.0611 Mironov, 2009, Organ printing: tissue spheroids as building blocks, Biomaterials, 30, 2164, 10.1016/j.biomaterials.2008.12.084 Ozbolat, 2015, Scaffold-based or scaffold-free bioprinting: competing or complementing approaches?, J. Nanotechnol. Eng. Med., 6, 1, 10.1115/1.4030414 Dababneh, 2014, Bioprinting technology: a current state-of-the-art review, J. Manuf. Sci. Eng., 136, 061016, 10.1115/1.4028512 Ozbolat, 2015, Special issue on three-dimensional bioprinting, J. Nanotechnol. Eng. Med., 6, 20301, 10.1115/1.4031391 Klebe, 1988, Cytoscribing: a method for micropositioning cells and the construction of two- and three-dimensional synthetic tissues, Exp. Cell Res., 179, 362, 10.1016/0014-4827(88)90275-3 Odde, 1999, Laser-guided direct writing for applications in biotechnology, Trends Biotechnol., 17, 385, 10.1016/S0167-7799(99)01355-4 Wilson, 2003, Cell and organ printing 1: protein and cell printers, Anat. Rec. Part A Discov. Mol. Cell. Evol. Biol., 272A, 491, 10.1002/ar.a.10057 Hutmacher, 2004, Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems, Trends Biotechnol., 22, 354, 10.1016/j.tibtech.2004.05.005 Rai, 2005, Novel PCL-based honeycomb scaffolds as drug delivery systems for rhBMP-2, Biomaterials, 26, 3739, 10.1016/j.biomaterials.2004.09.052 Narayan, 2014 Ozbolat, 2014, Development of multi-arm bioprinter for hybrid biofabrication of tissue engineering constructs, Robot. Comput. Integr. Manuf., 30, 295, 10.1016/j.rcim.2013.10.005 Root Analysis, 3D Bioprinting Market 2014–2030, 2014. Knowlton, 2016, Advancing cancer research using 43, Int. J. Bioprint., 2, 10.18063/IJB.2016.02.003 Ozbolat, 2014, Design of a new parametric path plan for additive manufacturing of hollow porous structures with functionally graded materials, J. Comput. Inf. Sci. Eng., 14, 41005, 10.1115/1.4028418 Ozbolat, 2016, Current advances and future perspectives in extrusion-based bioprinting, Biomaterials, 76, 321, 10.1016/j.biomaterials.2015.10.076 Khoda, 2011, Engineered tissue scaffolds with variational porous architecture, J. Biomech. Eng., 133, 011001, 10.1115/1.4002933 Ozbolat, 2011, Multi-function based modeling of 3D heterogeneous wound scaffolds for improved wound healing, Comput. Aided Des. Appl., 8, 43, 10.3722/cadaps.2011.43-57 Zhang, 2015, In vitro study of directly bioprinted perfusable vasculature conduits, Biomater. Sci., 3, 134, 10.1039/C4BM00234B Zhang, 2013, Characterization of printable cellular micro-fluidic channels for tissue engineering, Biofabrication, 5, 025004, 10.1088/1758-5082/5/2/025004 Yu, 2014, A hybrid bioprinting approach for scale-up tissue fabrication, J. Manuf. Sci. Eng., 136, 61013, 10.1115/1.4028511 Dolati, 2014, In vitro evaluation of carbon-nanotube-reinforced bioprintable vascular conduits, Nanotechnology, 25, 145101, 10.1088/0957-4484/25/14/145101 Landers, 2002, Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering, Biomaterials, 23, 4437, 10.1016/S0142-9612(02)00139-4 Bioprinter Alpha | 3Dynamic Systems Ltd. http://www.bioprintingsystems.com/bioprinter-alpha.html, 2016 (accessed 07.18.16). Bioprinter Omega | 3Dynamic Systems Ltd. http://www.bioprintingsystems.com/bioprinter-omega.html, 2016 (accessed 07.18.16). Ersumo, 2015, Effects of hydrogel properties and extrusion parameters on 3D bioprinting, IEEE, 25 2016 Duan, 2013, 3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels, J. Biomed. Mater. Res. Part A, 101A, 1255, 10.1002/jbm.a.34420 Cohen, 2010, Additive manufacturing for in situ repair of osteochondral defects, Biofabrication, 2, 035004, 10.1088/1758-5082/2/3/035004 Mannoor, 2013, 3D printed bionic ears, Nano Lett., 13, 2634, 10.1021/nl4007744 Malone, 2007, Fab@Home: the personal desktop fabricator kitnull, Rapid Prototyp. J., 13, 245, 10.1108/13552540710776197 Seraph Robotics. http://www.scientist3d.com/, 2016 (accessed 02.27.16). Cellink. http://www.cellink3d.com/, 2016 (accessed 02.27.16). Zou, 2016, Enhanced osteogenic differentiation and biomineralization in mouse mesenchymal stromal cells on a β-TCP robocast scaffold modified with collagen nanofibers, RSC Adv., 6, 23588, 10.1039/C5RA26670J Wang, 2016, Automated quantitative assessment of three-dimensional bioprinted hydrogel scaffolds using optical coherence tomography, Biomed. Opt. Express, 7, 894, 10.1364/BOE.7.000894 Bodrum, 2015, Design and construction of a 3D bioprinter for bioprinting of tissues and organs, Deneysel ve Klinik Arastirmalar Merkezi, 153 Regemat3D. http://www.regemat3d.com/, 2016 (accessed 07.18.16). Advanced Solutions Life Sciences. http://www.lifesciences.solutions/, 2016 (accessed 07.18.16). Fedorovich, 2008, Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing, Tissue Eng. Part A, 14, 127, 10.1089/ten.a.2007.0158 Chien, 2012, Three dimensional printing of soy protein scaffolds for tissue regeneration, Tissue Eng. Part C: Methods, 19 EnvisionTEC. http://envisiontec.com/, 2016 (accessed 02.27.16). Golez, 2014, Three-dimensional (3D) bone tissues derived from stem cells as a novel model for mineralization Robbins, 2013 King, 2013 Bertassoni, 2014, Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs, Lab Chip, 14, 2202, 10.1039/C4LC00030G Smith, 2004, Three-dimensional bioassembly tool for generating viable tissue-engineered constructs, Tissue Eng., 10, 1566, 10.1089/ten.2004.10.1566 Bio3D Technologies – Printing & Shaping the Future. http://bio3d.tech/, 2016 (accessed 07.18.16). Markstedt, 2015, 3D bioprinting human chondrocytes with nanocellulose–alginate bioink for cartilage tissue engineering applications, Biomacromolecules, 16, 1489, 10.1021/acs.biomac.5b00188 Horváth, 2015, Engineering an in vitro air-blood barrier by 3D bioprinting, Sci. Rep., 5, 7974, 10.1038/srep07974 3Dynamic Systems Ltd, 2016 Cohen, 2010, Increased mixing improves hydrogel homogeneity and quality of three-dimensional printed constructs, Tissue Eng. Part C: Methods, 17, 239, 10.1089/ten.tec.2010.0093 Duan, 2014, Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells, Acta Biomater., 10, 1836, 10.1016/j.actbio.2013.12.005 Regenovo Biotechnology Co. Ltd. http://regenovo.com/english/, 2016 (accessed 02.27.16). Sheshadri, 2015, Characterization of material–process–structure interactions in the 3D bioplotting of polycaprolactone, 3D print, Addit. Manuf., 2, 20 Pfister, 2004, Biofunctional rapid prototyping for tissue-engineering applications: 3D bioplotting versus 3D printing, J. Polym. Sci. Part A Polym. Chem., 42, 624, 10.1002/pola.10807 King, 2014, Abstract 2034: development of 3D bioprinted human breast cancer for in vitro drug screening, Cancer Res., 74, 2034, 10.1158/1538-7445.AM2014-2034 Roskos, 2015 Norotte, 2009, Scaffold-free vascular tissue engineering using bioprinting, Biomaterials, 30, 5910, 10.1016/j.biomaterials.2009.06.034 Jakab, 2008, Tissue engineering by self-assembly of cells printed into topologically defined structures, Tissue Eng. Part A, 14, 413, 10.1089/tea.2007.0173 nScrypt| 3D conformal dispensing systems & laser micro printing. http://nscrypt.com/, 2016 (accessed 07.18.16). RegenHU biosystems architects. http://www.regenhu.com/, 2016 (accessed 02.27.16). Ng, 2016, Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering, Int. J. Bioprint., 2 Tan, 2015, Concentric bioprinting of alginate-based tubular constructs using multi-nozzle extrusion-based technique, Int. J. Bioprint., 1, 49 Xu, 2013, Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications, Biofabrication, 5, 015001, 10.1088/1758-5082/5/1/015001 Gudapati, 2016, A comprehensive review on droplet-based bioprinting: past, present and future, Biomaterials, 102, 20, 10.1016/j.biomaterials.2016.06.012 Xu, 2005, Inkjet printing of viable mammalian cells, Biomaterials, 26, 93, 10.1016/j.biomaterials.2004.04.011 Xu, 2006, Viability and electrophysiology of neural cell structures generated by the inkjet printing method, Biomaterials, 27, 3580 Boland, 2007, Drop-on-demand printing of cells and materials for designer tissue constructs, Mater. Sci. Eng. C, 27, 372, 10.1016/j.msec.2006.05.047 Xu, 2009, Fabrication and characterization of bio-engineered cardiac pseudo tissues, Biofabrication, 1, 035001, 10.1088/1758-5082/1/3/035001 Nishiyama, 2008, Development of a three-dimensional bioprinter: construction of cell supporting structures using hydrogel and state-of-the-art inkjet technology, J. Biomech. Eng., 131, 35001, 10.1115/1.3002759 Choi, 2011, Synthetic multicellular cell-to-cell communication in inkjet printed bacterial cell systems, Biomaterials, 32, 2500, 10.1016/j.biomaterials.2010.12.014 Ferris, 2013, Bio-ink for on-demand printing of living cells, Biomater. Sci., 1, 224, 10.1039/C2BM00114D Yamaguchi, 2012, Cell patterning through inkjet printing of one cell per droplet, Biofabrication, 4, 045005, 10.1088/1758-5082/4/4/045005 Suntivich, 2014, Inkjet printing of silk nest arrays for cell hosting, Biomacromolecules, 15, 1428, 10.1021/bm500027c Xu, 2012, Scaffold-free inkjet printing of three-dimensional zigzag cellular tubes, Biotechnol. Bioeng., 109, 3152, 10.1002/bit.24591 Christensen, 2015, Freeform inkjet printing of cellular structures with bifurcations, Biotechnol. Bioeng., 112, 1047, 10.1002/bit.25501 Morrison, 2010, Viscoelasticity in inkjet printing, Rheol. Acta, 49, 619, 10.1007/s00397-009-0419-z Xu, 2010, A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation, Biofabrication, 2, 014105, 10.1088/1758-5082/2/1/014105 Moon, 2010, Layer by layer three-dimensional tissue epitaxy by cell-laden hydrogel droplets, Tissue Eng. Part C: Methods, 16, 157, 10.1089/ten.tec.2009.0179 Xu, 2011, A three-dimensional in vitro ovarian cancer coculture model using a high-throughput cell patterning platform, Biotechnol. J., 6, 204, 10.1002/biot.201000340 Gurkan, 2014, Engineering anisotropic biomimetic fibrocartilage microenvironment by bioprinting mesenchymal stem cells in nanoliter gel droplets, Mol. Pharm., 11, 2151, 10.1021/mp400573g Lee, 2009, Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication, Biomaterials, 30, 1587, 10.1016/j.biomaterials.2008.12.009 Lee, 2010, Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture, Exp. Neurol., 223, 645, 10.1016/j.expneurol.2010.02.014 Lee, 2014, Generation of multi-scale vascular network system within 3D hydrogel using 3D bio-printing technology, Cell. Mol. Bioeng., 7, 460, 10.1007/s12195-014-0340-0 Faulkner-Jones, 2013, Development of a valve-based cell printer for the formation of human embryonic stem cell spheroid aggregates, Biofabrication, 5, 015013, 10.1088/1758-5082/5/1/015013 Faulkner-Jones, 2015, Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D, Biofabrication, 7, 044102, 10.1088/1758-5090/7/4/044102 Li, 2015, Rapid formation of a supramolecular polypeptide-DNA hydrogel for in situ three-dimensional multilayer bioprinting, Angew. Chem. Int. Ed. Engl., 54, 3957, 10.1002/anie.201411383 Tasoglu, 2013, Bioprinting for stem cell research, Trends Biotechnol., 31, 10, 10.1016/j.tibtech.2012.10.005 Jayasinghe, 2006, Electrohydrodynamic jet processing: an advanced electric-field-driven jetting phenomenon for processing living cells, Small, 2, 216, 10.1002/smll.200500291 Jayasinghe, 2004, Electrostatic atomisation of a ceramic suspension, J. Eur. Ceram. Soc., 24, 2203, 10.1016/j.jeurceramsoc.2003.07.001 Jayasinghe, 2002, A novel ceramic printing technique based on electrostatic atomization of a suspension, Mater. Res. Innov., 6, 92, 10.1007/s10019-002-0192-4 Eagles, 2006, Electrohydrodynamic jetting of mouse neuronal cells, Biochem. J., 394, 375, 10.1042/BJ20051838 Workman, 2014, Controlled generation of microspheres incorporating extracellular matrix fibrils for three-dimensional cell culture, Adv. Funct. Mater., 24, 2648, 10.1002/adfm.201303891 Xie, 2007, Electrospray in the dripping mode for cell microencapsulation, J. Colloid Interface Sci., 312, 247, 10.1016/j.jcis.2007.04.023 Kim, 2007, Optimization of electrohydrodynamic writing technique to print collagen, Exp. Tech., 31, 15, 10.1111/j.1747-1567.2007.00154.x Poellmann, 2011, Patterned hydrogel substrates for cell culture with electrohydrodynamic jet printing, Macromol. Biosci., 11, 1164, 10.1002/mabi.201100004 Onses, 2015, Mechanisms, capabilities, and applications of high-resolution electrohydrodynamic jet printing, Small, 11, 4237, 10.1002/smll.201500593 Sutanto, 2012, A multimaterial electrohydrodynamic jet (E-jet) printing system, J. Micromech. Microeng., 22, 045008, 10.1088/0960-1317/22/4/045008 Gasperini, 2015, An electrohydrodynamic bioprinter for alginate hydrogels containing living cells, Tissue Eng. Part C: Methods, 21, 123, 10.1089/ten.tec.2014.0149 Demirci, 2007, Single cell epitaxy by acoustic picolitre droplets, Lab Chip, 7, 1139, 10.1039/b704965j Fang, 2012, Rapid generation of multiplexed cell cocultures using acoustic droplet ejection followed by aqueous two-phase exclusion patterning, Tissue Eng. Part C: Methods, 18, 647, 10.1089/ten.tec.2011.0709 Microarray printing, biochip spotting on Autodrop positioning systems. http://www.microdrop.com/autodrop-platform-69.html, 2016 (accessed 07.18.16). Derby, 2010, Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution, Annu. Rev. Mater. Res., 40, 395, 10.1146/annurev-matsci-070909-104502 Wijshoff, 2010, The dynamics of the piezo inkjet printhead operation, Phys. Rep., 491, 77, 10.1016/j.physrep.2010.03.003 Singh, 2010, Inkjet printing-process and its applications, Adv. Mater., 22, 673, 10.1002/adma.200901141 MicroFab Technologies Inc., Complete Systems. http://www.microfab.com/complete-systems, 2016 (accessed 04.03.16). Fujifilm Holdings America Corporation, Dimatix Revolutionizes Materials Deposition with Industry’s First Low-Cost, Cartridge-Based Ink Jet Printing System. http://www.fujifilmusa.com/press/news/display_news?newsID=880138, 2005 (accessed 09.10.16). Matsusaki, 2013, Three-dimensional human tissue chips fabricated by rapid and automatic inkjet cell printing, Adv. Healthc. Mater., 2, 534, 10.1002/adhm.201200299 Campbell, 2005, Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization, Biomaterials, 26, 6762, 10.1016/j.biomaterials.2005.04.032 Miller, 2006, Dose-dependent cell growth in response to concentration modulated patterns of FGF-2 printed on fibrin, Biomaterials, 27, 2213, 10.1016/j.biomaterials.2005.10.021 Phillippi, 2008, Microenvironments engineered by inkjet bioprinting spatially direct adult stem cells toward muscle- and bone-like subpopulations, Stem Cells, 26, 127, 10.1634/stemcells.2007-0520 Cheng, 2014, 1 Roth, 2004, Inkjet printing for high-throughput cell patterning, Biomaterials, 25, 3707, 10.1016/j.biomaterials.2003.10.052 Cui, 2009, Human microvasculature fabrication using thermal inkjet printing technology, Biomaterials, 30, 6221, 10.1016/j.biomaterials.2009.07.056 Yanez, 2014, In vivo assessment of printed microvasculature in a bilayer skin graft to treat full-thickness wounds, Tissue Eng. Part A, 21, 224, 10.1089/ten.tea.2013.0561 Xu, 2008, High-throughput production of single-cell microparticles using an inkjet printing technology, J. Manuf. Sci. Eng., 130, 021017, 10.1115/1.2903064 Xu, 2013, Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology, Biomaterials, 34, 130, 10.1016/j.biomaterials.2012.09.035 Cui, 2012, Direct human cartilage repair using three-dimensional bioprinting technology, Tissue Eng. Part A, 18, 1304, 10.1089/ten.tea.2011.0543 Cui, 2012, Synergistic action of fibroblast growth factor-2 and transforming growth factor-beta1 enhances bioprinted human neocartilage formation, Biotechnol. Bioeng., 109, 2357, 10.1002/bit.24488 Gao, 2015, Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging, Biotechnol. J., 10, 1568, 10.1002/biot.201400635 Gao, 2014, Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells, Biotechnol. J., 9, 1304, 10.1002/biot.201400305 Rodríguez-Dévora, 2012, High throughput miniature drug-screening platform using bioprinting technology, Biofabrication, 4, 035001, 10.1088/1758-5082/4/3/035001 Yusof, 2011, Inkjet-like printing of single-cells, Lab Chip, 11, 2447, 10.1039/c1lc20176j Jayasinghe, 2006, Stable electric-field driven cone-jetting of concentrated biosuspensions, Lab Chip, 6, 1086, 10.1039/b606508m Mongkoldhumrongkul, 2009, Bio-electrospraying whole human blood: analysing cellular viability at a molecular level, J. Tissue Eng. Regen. Med., 3, 562, 10.1002/term.185 Gasperini, 2013, Microencapsulation of cells in alginate through an electrohydrodynamic process, J. Bioact. Compat. Polym., 28, 413, 10.1177/0883911513501599 Lee, 2009, Three-dimensional bioprinting of rat embryonic neural cells, Neuroreport, 20, 798, 10.1097/WNR.0b013e32832b8be4 Odde, 2000, Laser-guided direct writing of living cells, Biotechnol. Bioeng., 67, 312, 10.1002/(SICI)1097-0290(20000205)67:3<312::AID-BIT7>3.0.CO;2-F Ringeisen, 2002, Picoliter-scale protein microarrays by laser direct write, Biotechnol. Prog., 18, 1126, 10.1021/bp015516g Ringeisen, 2004, Laser printing of pluripotent embryonal carcinoma cells, Tissue Eng., 10, 483, 10.1089/107632704323061843 Renn, 1999, Laser guidance and trapping of mesoscale particles in hollow-core optical fibers, Phys. Rev. Lett., 82, 1574, 10.1103/PhysRevLett.82.1574 Xu, 2003, Laser-guided direct writing: a novel method to deposit biomolecules for biosensors arrays, IEEE Trans. Biomed. Eng., 50, 126, 10.1109/TBME.2002.805461 Nahmias, 2005, Laser-guided direct writing for three-dimensional tissue engineering, Biotechnol. Bioeng., 92, 129, 10.1002/bit.20585 Ringeisen, 2006, Jet-based methods to print living cells, Biotechnol. J., 1, 930, 10.1002/biot.200600058 Lin, 2011, Laser-assisted fabrication of highly viscous alginate microsphere, J. Appl. Phys., 109, 10.1063/1.3569863 Yan, 2013, Laser-assisted printing of alginate long tubes and annular constructs, Biofabrication, 5, 015002, 10.1088/1758-5082/5/1/015002 Xiong, 2015, Freeform drop-on-demand laser printing of 3D alginate and cellular constructs, Biofabrication, 7, 045011, 10.1088/1758-5090/7/4/045011 Lin, 2009, Effect of laser fluence on yeast cell viability in laser-assisted cell transfer, J. Appl. Phys., 106, 10.1063/1.3202388 Doraiswamy, 2006, Excimer laser forward transfer of mammalian cells using a novel triazene absorbing layer, Appl. Surf. Sci., 252, 4743, 10.1016/j.apsusc.2005.07.166 Barron, 2004, Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns, Biomed. Microdevices, 6, 139, 10.1023/B:BMMD.0000031751.67267.9f Barron, 2004, Biological laser printing of three dimensional cellular structures, Appl. Phys. A, 79, 1027, 10.1007/s00339-004-2620-3 Hopp, 2005, Survival and proliferative ability of various living cell types after laser-induced forward transfer, Tissue Eng., 11, 1817, 10.1089/ten.2005.11.1817 Gruene, 2011, Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells, Biofabrication, 3, 015005, 10.1088/1758-5082/3/1/015005 Gruene, 2011, Laser printing of three-dimensional multicellular arrays for studies of cell–cell and cell–environment interactions, Tissue Eng. Part C: Methods, 17, 973, 10.1089/ten.tec.2011.0185 Lin, 2010, Effect of laser fluence in laser-assisted direct writing of human colon cancer cell, Rapid Prototyp. J., 16, 202, 10.1108/13552541011034870 Koch, 2012, Skin tissue generation by laser cell printing, Biotechnol. Bioeng., 109, 1855, 10.1002/bit.24455 Koch, 2010, Laser printing of skin cells and human stem cells, Tissue Eng. Part C: Methods, 16, 847, 10.1089/ten.tec.2009.0397 Skardal, 2015, Biomaterials for integration with 3-D bioprinting, Ann. Biomed. Eng., 43, 730, 10.1007/s10439-014-1207-1 Hribar, 2014, Light-assisted direct-write of 3D functional biomaterials, Lab Chip, 14, 268, 10.1039/C3LC50634G Barron, 2004, Application of laser printing to mammalian cells, Thin Solid Films, 453–454, 383, 10.1016/j.tsf.2003.11.161 Barron, 2005, Laser printing of single cells: statistical analysis, cell viability, and stress, Ann. Biomed. Eng., 33, 121, 10.1007/s10439-005-8971-x Doraiswamy, 2007, Laser microfabrication of hydroxyapatite-osteoblast-like cell composites, J. Biomed. Mater. Res. A, 80, 635, 10.1002/jbm.a.30969 Gudapati, 2014, Alginate gelation-induced cell death during laser-assisted cell printing, Biofabrication, 6, 035022, 10.1088/1758-5082/6/3/035022 Kucukgul, 2015, 3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells, Biotechnol. Bioeng., 112, 811, 10.1002/bit.25493 Bruzewicz, 2012, Low-cost printing of PDMS barriers to define microchannels in paper, Changes, 29, 997 Franco, 2011, Direct-write assembly of calcium phosphate scaffolds using a water-based hydrogel, Acta Biomater., 6, 218, 10.1016/j.actbio.2009.06.031 Xiong, 2015, Identification of optimal printing conditions for laser printing of alginate tubular constructs, J. Manuf. Process., 20, 450, 10.1016/j.jmapro.2015.06.023 Zhang, 2012, Rapid fabrication of complex 3D extracellular microenvironments by dynamic optical projection stereolithography, Adv. Mater., 24, 4266, 10.1002/adma.201202024 Ozbolat, 2015, Bioprinting scale-up tissue and organ constructs for transplantation, Trends Biotechnol., 33, 395, 10.1016/j.tibtech.2015.04.005 Yu, 2016, Three-dimensional bioprinting using self-assembling scalable scaffold-free tissue strands as a new bioink, Sci. Rep., 6, 28714, 10.1038/srep28714 Akkouch, 2015, Microfabrication of scaffold-free tissue strands for three-dimensional tissue engineering, Biofabrication, 7, 31002, 10.1088/1758-5090/7/3/031002 Hinton, 2015, Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels, Sci. Adv., 1, 10.1126/sciadv.1500758 Ker, 2011, Engineering spatial control of multiple differentiation fates within a stem cell population, Biomaterials, 32, 3413, 10.1016/j.biomaterials.2011.01.036 Khoda, 2013, Designing heterogeneous porous tissue scaffolds for additive manufacturing processes, CAD Comput. Aided Des., 45, 1507, 10.1016/j.cad.2013.07.003 Ozbolat, 2016, Application areas of 3D bioprinting, Drug Discov. Today, 21, 1257, 10.1016/j.drudis.2016.04.006 Peng, 2016, Bioprinting towards physiologically relevant tissue models for pharmaceutics, Trends Biotechnol., 34, 722, 10.1016/j.tibtech.2016.05.013 Pavillon, 2013, Cell optical density and molecular composition revealed by simultaneous multimodal label-free imaging, Biophys. J., 105, 1123, 10.1016/j.bpj.2013.07.031