Frontiers of Optoelectronics

In this work, we present the design of a polarization independent broadband absorber in the terahertz (THz) frequency range using a metasurface resonator. The absorber comprises of three layers, of which, the top layer is made of a vanadium dioxide (VO2) resonator with an electrical conductivity of σ = 200000 S/m; the bottom layer consists of a planar layer made of gold metal, and a dielectric layer is sandwiched between these two layers. The optimized absorber exhibits absorption greater than 90% from 2.54–5.54 THz. Thus, the corresponding bandwidth of the designed absorber is 3 THz. Further, the thermal tunable absorption and reflection spectra have been analyzed by varying the electrical conductivity of VO2. The impact of the various geometrical parameters on the absorption characteristics has also been assessed. The physics of generation of broadband absorption of the proposed device has been explored using field analysis. Finally, the absorption characteristics of the unit cell has been studied for various incident and polarization angles.

In this study, a hybrid algorithm combining genetic algorithm (GA) with back propagation (BP) neural network (GA-BP) was proposed for extracting the characteristics of multi-peak Brillouin scattering spectrum. Simulations and experimental results show that the GA-BP hybrid algorithm can accurately identify the position and amount of peaks in multi-peak Brillouin scattering spectrum. Moreover, the proposed algorithm obtains a fitting degree of 0.9923 and a mean square error of 0.0094. Therefore, the GA-BP hybrid algorithm possesses a good fitting precision and is suitable for extracting the characteristics of multi-peak Brillouin scattering spectrum.

The streak tube imaging light detection and ranging (LiDAR) is a new type of waveform sampling laser imaging radar whose echo signals are stripe images with a high frame rate. In this study, the morphological and statistical characteristics of stripe signals are analyzed in detail. Based on the concept of mathematical morphology denoising, connected domains are constructed in a noisecontaining stripe image, and the noise is removed using the difference in connected domains area between signals and noises. It is shown that, for stripe signals, the proposed denoising method is significantly more efficient than Wiener filtering.

Upcoming generations of coherent intra/inter data center interconnects currently lack a clear path toward a reduction of cost and power consumption, which are the driving factors for these data links. In this work, the tradeoffs associated with a transition from coherent C-band to O-band silicon photonics are addressed and evaluated. The discussion includes the fundamental components of coherent data links, namely the optical components, fiber link and transceivers. As a major component of these links, a monolithic silicon photonic BiCMOS O-band coherent receiver is evaluated for its potential performance and compared to an analogous C-band device.

In this paper, the photonic band gap (PBG) properties of two dimensional (2D) square lattice photonic crystal structures composed of rectangular cells were studied. The effect of refractive index, rectangles length and the ratio of width to length of the rectangles on the PBG properties of the structure with different configurations was investigated. It is found that the density of gaps in both modes (transverse electric (TE) and transverse magnetic (TM)) is high for structure composed of rectangular dielectric rods in air, while the density of the gaps is very low for structure composed of rectangular air pores in dielectric material.

In this paper, we proposed a 2-channel demultiplexer based on photonic crystal ring resonator (PCRR). For performing wavelength selection, we used two ring resonators, two different wavelengths were obtained by using two resonant rings with different values for the radius of dielectric rods. All the simulations and calculations have been done using Rsoft Photonic CAD software, which employs finite difference time domain (FDTD) method. The output channels were respectively at 1590.8 and 1593.8 nm, correspondingly had the quality factors of 7954 and 3984, the crosstalk values of − 22 and − 11 dB separately. The total footprint of our proposed structure is 681.36 μm2. Results suggest that 2-channels in the proposed structure are characterized with high transmission efficiency and low band width, resulting in a very sharp output spectrum and high quality factor values.

5G is emerging, but the current fronthaul transmission technologies used for 3G and 4G may not be efficient and appropriate for 5G. It has been found that frequency division multiple access (FDMA) and time-division multiple access (TDMA) based radio over fiber (RoF) may be considered the most appropriate for 5G fronthaul transmission technology. Due to analog RoF transmission, broadband linearization is required. In this work, both electrical and optical broadband linearization techniques are reviewed.