Fibers and Polymers

Công bố khoa học tiêu biểu

* Dữ liệu chỉ mang tính chất tham khảo

Sắp xếp:  
Experimental determination of mechanical properties of banana jute hybrid composite
Fibers and Polymers - - 2015
B. Vijaya Ramnath, R. Sharavanan, M. Chandrasekaran, C. Elanchezhian, R. Sathyanarayanan, R. Niranjan Raja, S. Junaid Kokan
Presently there has been an enormous increase in demand for novel materials to produce complex products with better quality. Hence, plant fibres shall be used to achieve this goal. Hybrid natural fibre composites, can fulfil these requirements. This paper deals with the fabrication and investigation of mechanical properties of hybrid natural fibre composite (banana jute glass fibre) and compares i... hiện toàn bộ
Segmentation of market for mountaineering jackets of high-performance fabrics
Fibers and Polymers - - 2009
Eui Kyung Roh, Seong Hun Kim
The impacts of thermal treatments on the physical properties of textile vascular prostheses
Fibers and Polymers - Tập 13 Số 1 - Trang 68-78 - 2012
H. Khlif, Soufien Dhouib, Saber Ben Abdessalem, Faouzi Sakli
Trichromatic Dyeing of Polyimide Fiber Using Its Inherent Color as a Yellow Component
Fibers and Polymers - Tập 21 - Trang 1783-1789 - 2020
Dongyan Shao, Changhai Xu, Jinmei Du, Hongbo Wang
Polyimide (PI) fiber is one kind of high-performance fibers with outstanding thermal stability, mechanical properties, and chemical resistance, but it is difficult to be dyed due to its tightly packed macromolecules and lack of functional groups for dyeing. Especially, the inherent yellow shade of PI fiber limits the color gamut that can be matched by trichromatic dyeing. In this study, it is prop... hiện toàn bộ
Surface modification of silk fibroin nanofibrous mat with dextran for wound dressing
Fibers and Polymers - Tập 15 - Trang 1137-1145 - 2014
Moo Kon Kim, Hyo Won Kwak, Hyung Hwan Kim, Tae Rin Kwon, So Young Kim, Beom Joon Kim, Young Hwan Park, Ki Hoon Lee
In this study, we examined the effects of a dextran-modified silk fibroin nanofibrous mat (D-SFNM) on wound healing. To increase the hydrophilicity of silk fibroin (SF), the SF nanofibrous mat (SFNM) was modified with oxidized dextran. The D-SFNM absorbed water faster than the SFNM, and the swelling ratio was increased by approximately 80 % compared with the SFNM. An in vitro cell (NIH3T3) test re... hiện toàn bộ
Statistical analysis of the effect of multi-stage hot drawing on the thermal shrinkage and crystallographic order of biodegradable aliphatic-aromatic co-polyester fibres
Fibers and Polymers - Tập 12 - Trang 778-788 - 2011
Basel Younes, Alex Fotheringham, Robert Mather
Using statistical experimental design, the effects of multi-stage hot drawing process on thermal shrinkage and crystallographic order of linear aliphatic-aromatic co-polyester fibres were statistically analyzed. Thermal shrinkage and fullwidth half-maximum (FWHM) of an X-ray scattering profile of the fibres have been quantitatively assessed, and the direction of increasing or decreasing the signif... hiện toàn bộ
Reactivity and stability of C.I. Reactive Red 120 at high temperature
Fibers and Polymers - Tập 15 - Trang 2515-2524 - 2015
Lingling Hu, Qiang Wang, Hongfei Qian, Xuerong Fan
Reactivity and stability of a bis(monochloro-s-triazine) reactive dye (C.I. Reactive Red 120) between 90 and 130 °C at various pH values were studied using HPLC. The obtained rate constants for the hydrolysis of the dye show that the reactivity in the range of 100 °C to 130 °C and at pH values lower than 10.0 is close to the reactivity at 90 °C and pH 11.0, indicating that severe hydrolysis of the... hiện toàn bộ
Hybrid multi-scale basalt fiber-epoxy composite laminate reinforced with Electrospun polyurethane nanofibers containing carbon nanotubes
Fibers and Polymers - Tập 15 - Trang 1295-1302 - 2014
I. D. G. Ary Subagia, Zhe Jiang, Leonard D. Tijing, Yonjig Kim, Cheol Sang Kim, Jae Kyoo Lim, Ho Kyong Shon
In this study, we report the fabrication and evaluation of a hybrid multi-scale basalt fiber/epoxy composite laminate reinforced with layers of electrospun carbon nanotube/polyurethane (CNT/PU) nanofibers. Electrospun polyurethane mats containing 1, 3 and 5 wt% carbon nanotubes (CNTs) were interleaved between layers of basalt fibers laminated with epoxy through vacuum-assisted resin transfer moldi... hiện toàn bộ
Halochromic chemosensor prepared by pyran-based nanofibers
Fibers and Polymers - Tập 14 - Trang 1981-1984 - 2014
Sung-Hoon Kim, Jin-Seok Bae
Colorimetric chemosensors can easily detect and prevent the primary danger or change of the surrounding environmental pollutions and sources of infection in the various fields. Pyran based colorant having the function of colorimetric chemosensor was synthesized. Synthesized colorant was characterized by 1H NMR, GC-Mass, EA and UV-vis spectroscopy and then mixed with polyacrylonitrile for electrosp... hiện toàn bộ
Isotherm and Kinetic Studies in Dyeing of Citric Acid-Crosslinked Cotton with Cationic Natural Dye
Fibers and Polymers - Tập 21 - Trang 2547-2555 - 2020
Aminoddin Haji, Seyed Mansour Bidoki, Firoozeh Gholami
In this study, cotton fabric was crosslinked with citric acid (CA) in the presence of sodium hypophosphite using a pad-dry-cure process under the optimum conditions. The chemistry and morphology of the crosslinked fibers were studied and compared with the untreated fibers using FTIR and SEM. The crosslinked fabric was dyed with the natural cationic dye, berberine, obtained from the roots of Berber... hiện toàn bộ
Tổng số: 3,321   
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 10